View Full Version : A/C wiring for a S14 SR in a S13?
C. Anderson
04-30-2008, 08:43 PM
I have tried searching with no luck but I was trying to see if this is correct from what I've found in the FSMs. I have pin 25 (green/yellow) from F1 (s14 interior plug) going to green/yellow on F1 (s13 interior plug) then extended to green/yellow on F9 (s13 harness under the hood by the battery) for the relay. For the thermal control amp (AC switch) I have pin 17 (red) from F1 (s14 interior plug) to the blue/green on F1 (s13 interior plug) then extended to blue/green on F9 (s13 harness under the hood by the battery). Is this correct? I was just looking for verification from anybody that may be able to help. Thanks!
C. Anderson
05-02-2008, 08:08 AM
Can anybody comfirm?
Z U L8R
05-02-2008, 11:44 PM
run the blue/green stripe on your s13's dash plug behind the glove box to your green/yellow on your s13's brownish/red plug on the passenger side fender where the battery goes
Dave =]
C. Anderson
05-03-2008, 06:48 AM
Thanks! I'll check that out.
juls213
05-03-2008, 07:05 AM
What kind of compressor and bracket are you using?
I have an s14 with s13redtop. Can i use the sr bracket with s14kade compressor? Guys I need AC lol
Z U L8R
05-03-2008, 08:52 AM
juls it'd probably be the easiest thing to use the red top sr compressor and bracket and get the ends of the high and low pressure hoses fabricated. gl
Dave =]
vBulletin® v3.8.11, Copyright ©2000-2021, vBulletin Solutions Inc.