inzane089
04-27-2008, 04:25 PM
Ok guys im dying here I have been working on this car for weeks removed intake and removen then welded EGR and SCV. removed exhaust and welded EGR and the other thing under the EGR that send exhaust through the air intake.
just for test purpose I connected the scv and other little valve
The car turns over just fine. timing is set correctly
Great spark no problems there
Fuel pressure just tested got a strong 43 psi
Tested injector harness have 12.4v when the car is in the on position upon cranking drops to 10.5v.
My problem is that I have no injector spray
have not tested the ecu but I dont really know what to test anyways.
please help
chris
309 241 4112
just for test purpose I connected the scv and other little valve
The car turns over just fine. timing is set correctly
Great spark no problems there
Fuel pressure just tested got a strong 43 psi
Tested injector harness have 12.4v when the car is in the on position upon cranking drops to 10.5v.
My problem is that I have no injector spray
have not tested the ecu but I dont really know what to test anyways.
please help
chris
309 241 4112