z32 bmc adapter

[Nismo_420sx]

Has anyone used this http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&category=33566&viewitem=&item=320244195517&_trksid=p3907.m29
instead of pressing the fitting in from the 240sx master cylinder. Would this even work?

[blu808]

It should. I dont see why it wouldn't

[naed240sx]

God that thing would have saved me so much pain and agony.

[WilloW]

I saw that thing used by a member here once, he was selling the BMC.

[GSXRJJordan]

Huh. The Z32 BMC I used didn't need any fitting... am I missing something?

[david200095367]

^ yea same here. whats up with this fitting what does it do?

[naed240sx]

Huh. The Z32 BMC I used didn't need any fitting... am I missing something?

for the non abs s13, you need three lines to hook up to the z32 BMC. Since all z32s are abs, usually the middle fitting does not have the proper flare fitting, requiring you to insert a flare fitting that you hack out of another BMC or make your own bubble flare line.

[Jtuned_andy]

http://importnut.net/240pics/brake_upgrade/mcswap/MCswap05.JPG
http://importnut.net/240pics/brake_upgrade/mcswap/MCswap12.JPG
http://importnut.net/240pics/brake_upgrade/mcswap/MCswap17.JPG

[blu808]

Actually all z32tt's are abs but the abs module is located behind the passenger seat. engine bay lines are the same.

Where are you getting your info? Please dont post up random bs without knowing for sure.

[GSXRJJordan]

Gotcha, I didn't get that the listed fitting was a replacement for the flare we all steal out of the old MC. Thanks, and +rep.

Luke on the prowl... watch out, he's the new Russ/AJ :)

[blu808]

haha. i guess Jordan :kiss: . :yum: :yum: :yum: :yum:

[projectRDM]

Actually, ALL Z32s came with ABS, period.

[blu808]

from what i know in 1991 some trim models came without abs.

[naed240sx]

Actually all z32tt's are abs but the abs module is located behind the passenger seat. engine bay lines are the same.

Where are you getting your info? Please dont post up random bs without knowing for sure.

I misspoke. Meant to say all z32's HAVE abs. Post edited.

[drift freaq]

Ok fact is most of the Z32 BMC's up for sale need the fitting. Unless you hack one out of a old BMC to put it in your shit out of luck, without one of those fittings being sold on ebay. I know, hehehhehehhe lets just say I know where the ebay guy gets his fittings and I won't sell them any cheaper than he does. In fact I only sell them with the masters if I sell a BMC.


P.S. the problem with hacking one of those fittings out of your old master is a lot of the old masters the fitting was literally a casted part of the master. Its messy time consuming and a hassle to cut up a master. Unless you like being cheap and spending a good hour or two of your time instead of spending $8-9 dollars. I don't know about you but my hourly time is worth a lot more than $8-9 hahahhahhahahhahha