Maximum tire size on stock s14 rolled fenders with 18x10 wheel ?

[BILLYhoang]

Wassup zilvia , I did a search on this but most of the answers were relating to the rear setup .

My question is , what is maximum tire size someone has run on a 18x10 wheel up front with stock rolled fenders on a s14 ?

If it matters , the offset is between around +3 .

-Billy

[i need tires]

ive seen people run 17x10 +12 FNsd on front with a 235/40 tire

so with you having a slightly more aggressive offset i would say a 225/40 or 45 should do ya good!

[BILLYhoang]

Maximum .... like 265s in the front .

[McRussellPants]

295s IIRC.

The cars pretty beat looking though.

S14 front fenders get wider the more ugly the get. total nissan hocus pocus.

[BILLYhoang]

is 275-40-18 out of the question ? for the front

[AceInHole]

285/30/R18 on 18x10 +20. Stock metal fender with lots of rolling, pulling, hammering:
http://www.gfabracing.com/gallery/d/56-2/after.jpg

[scottleone]

it's all depending on how much work you want to do you can get all the way up to a 335/30R18 depending on how much work you want to do, and how much money you have. the tire itself is 13.2 in. wide so it's not impossible to mount on a 10 in. wheel. cost is deffinetly a factor though, i would wholesale those for somewhere around $295.00 a tire, and i can imagine what dealer markup would be.

[a_ahmed]

285/30/18 ftw aceinthehole :D I hate s14 owners, so much easier for you to fit....

check my maximum rubber wheel fitment thread for some ideas...

[gotta240]

You guys all fail at reading......

STOCK ROLLED FENDER. Meaning... No hammer, no puller, no bat, no shoe, no newspaper, etc.


Also meaning the OP is FUCKED because a 10 +3 wheel will not fit for SHIT with merely a rolled fender... Well, unless you do some bullshit 215 tire which totally defeats such a wheel up front.

Moral of the story.

1. Zilvia cant read for jack shit.

2. OP is fucked

3. I'm still jealous over acinhole's tires.