PDA

View Full Version : S13 digital climate control

JRwerks
03-23-2008, 10:55 AM
ok well ive searched and found and printed all the wiring diagrams for the digital climate control and iono what i did wrong did everything that the diagrams said to do but some reason when i connect the 6pin plugs together the air comes on and keeps blowing wont shut off.... de-pinned what i needed to and pinned it where its suppose to be at...

Anyone suggest a certain write-up???
appreciate the help everyone...
brn2slid
03-23-2008, 11:55 AM
you need the blower motor speed sensor, you can not use your factory one... it needs to be swapped out... at least thats what it sounds like
ki_JDM_ds
03-23-2008, 12:01 PM
Yea it sounds like your blower motor speed sensor might be grounded to the ac line inside your air box.

are you just running one blue relay on the harness?
JRwerks
03-23-2008, 12:10 PM
i guess im running juss one blue relay thats the one connected to the jdm harness and my car is a 89' it comes with no a/c..


is the blower motor speed sensor the silver block thing that gets connected to the black thing behind the glove box??
ki_JDM_ds
03-23-2008, 12:32 PM
Yea thats what it is (silver thing)...

try plugging both relays in.

there is a thread out there its a post by broadfield he explains what he did to stop the blower motor problem. it helped me but i cannot find the link
driftenthusiast
03-23-2008, 02:45 PM
ok well ive searched and found and printed all the wiring diagrams for the digital climate control and iono what i did wrong did everything that the diagrams said to do but some reason when i connect the 6pin plugs together the air comes on and keeps blowing wont shut off.... de-pinned what i needed to and pinned it where its suppose to be at...

Anyone suggest a certain write-up???
appreciate the help everyone...
Use the search.
http://www.zilvia.net/f/showthread.php?t=154426&highlight=S13+digital+climate+control
JRwerks
03-23-2008, 04:58 PM
Omg thanks "DRIFTENTHUSIAST" this write up really helped me out gets rid of all the confusing sutuff this should be the only write up for the DCC lol.
JRwerks
04-02-2008, 08:02 PM
i completed my dcc about a week ago all i need to do is make a levridge or some connector of some type to open and close the heat/cold anyone have a method of what they used or? let me know all help is appreciated thanks.