PDA

View Full Version : Whats Tha Problem?????


nissans14k
03-18-2008, 09:52 PM
hey all, well i recently purchaced so origin 50mm rear panels and they fitment was awsome and not one complaint on them.. BUT.... of course i cut the sides at the body line and did all the correct procedures, but on the left side, tires sits super flush.. looks awsome.. but in the right side, i got about a half inch or so and ive tried numerous solutions.. checked springs and struts and all look fine..the fenders are on mark with the OE bodyline. i was wondering, could it be my bushing causing the difference? could one be worn out causing the problem? can someone help me shed some light on this plz... for the rear im using some AGX shocks with megan springs..

S13Leprechaun
03-18-2008, 09:55 PM
you probably bulged one of the fenders more.. youll prolly have to pul,l the rivets off and re-rivet it... my guess.

nissans14k
03-18-2008, 10:55 PM
well, i just have them mounted on four corners... fitment is perfect to the bodyline and form of the ride.. even before i had the fenders added on.. i thought i noticed it but its more defining now cause of the wheels being flushed....

eulalia
03-19-2008, 12:26 AM
if possible lay them flat on the floor and measure the middle and see if there is a difference between the two?

maybe ones off?

nissans14k
03-19-2008, 01:34 AM
ill take some measurements tomarrow.. but honestly i dont think thats it.. when im driving the car i can feel the slight hight in the right rear.. and as i stated before, the slight gap was there even before i installed the fenders... i was thinking that mabey the right side is correct and the bushing on the left might be out causing the that side to look a bit lower... ill check my suspension tomarrow..