PDA

View Full Version : grinding down the vss


MAGILLA
03-18-2008, 05:34 AM
Hey I just searched and found out you can use an auto vss in a manual with a bit of modification. Can anyone who has done this give me any Idea of the dimensions of the 5 speed vss. Does any one have one they can measure?
I want to get it done properly, without buying a new 5 speed one. Oh and before anyone suggests it i looked around for a used manual vss and for a s14 people want too much money. I can F**K up 10 auto vss units trying and still come out cheaper than buying a 5 speed unit. Plus it would make a descent write up.
* Unless some one wants to sell me a s14 manual vss for cheap:bigok:

MAGILLA
03-19-2008, 04:47 PM
anyone? little help please.

98koukile
03-19-2008, 11:45 PM
I got mine from autozone and the pinion gear from courtesy nissan... all in all it was like $140 shipped

serturbo
03-20-2008, 10:59 AM
What measurements do you need? I have a spare one I could measure.

xsparc
03-20-2008, 11:35 AM
im rebuilding my tranny this weekend. what measuments do you need?

MAGILLA
03-20-2008, 11:40 AM
What measurements do you need? I have a spare one I could measure.

I need the largest diameter of the section that plugs into the trans. The area below the o-ring. The area has a large diameter then tapers in then back out to another large diameter. I hope you know what I mean. If not let me know and I will try to find a pic. Thank you

xsparc
03-21-2008, 09:59 PM
ok, the area that goes in the trans on both sides o the o-ring is 28mm, it the tapers down to 20mm right before the gear. any other measurements you need?

NemeGuero
03-21-2008, 10:04 PM
That was my post. It doesn't work unless you change the gear too. Don't do it.