For those of you that work at dealers

[240racer]

I am looking at getting the 8.6:1 compression pistons from the '90 ka24e.  The engine will be bored .020" over.  If anybody who works at a dealer can post or email me these prices and part numbers I would really appreciate it.  Also, if any of you can get discounts, that of course, is always helpfull.  Let me know if you need more info.
thanks

[Foxcolt]

Call courtesy nissan. They are always really helpfull and used to us calling them for parts. They also have good prices.


Jed <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/devil.gif" border="0" valign="absmiddle" alt=':devil:'>

[uiuc240]

</span><table border="0" align="center" width="95%" cellpadding="3" cellspacing="1"><tr><td>Quote (240racer @ Nov. 01 2002,2:49)</td></tr><tr><td id="QUOTE">I am looking at getting the 8.6:1 compression pistons from the '90 ka24e. The engine will be bored .020" over.</td></tr></table><span id='postcolor'>
Those two things probably won't work. &nbsp;If you get an overbore, you also need overbore pistons. &nbsp;The rings aren't designed to make up for that difference. &nbsp;So you have two choices:

1. &nbsp;align the bores and use stock KA24E pistons
2. &nbsp;overbore and get forged pistons

I'd go with option 2 just because of the added strength

Eric

[240racer]

actually I just found out that I am not going to run these pistons anymore, oops. &nbsp;Anyway, Eric, they are available in .000, .020, and .040 over that's mostly because when you hone the cylinders on a rebuild it makes them a little oversized.

so thanks to those who were looking, but you don't need to anymore