PDA

View Full Version : how do you take off your gubenor??????


drfturkey
03-16-2008, 10:44 PM
does anyone know how to take off the gubenor on a s-13 ka24de cus im getting tired of topping out at 115

sleepinsilvia23
03-16-2008, 10:47 PM
HAHAH this is a joke right?? Let the flaming begin....

Mangudai
03-16-2008, 10:49 PM
One way is going with an ecu from a auto and the other way you should use the search feature to find.

projekt_s13
03-16-2008, 10:53 PM
Another way is spelling words correctly so people know what you are talking about.

drfturkey
03-16-2008, 10:55 PM
whats the correct way to spell it?????????? >_<

e1_griego
03-16-2008, 10:57 PM
'Governor', like the elected official.

Alex

jdm538
03-16-2008, 10:57 PM
its a brown wire from ecu i dont remember which 1... why do you need to go passed 115mph with a KA in socal whats the point?

steve_o1989
03-16-2008, 10:57 PM
Uhhh...right......

First things first, it is called a GOVERNOR. Second, you need an automatic ECU, that will get rid of this. Why are you needing to go faster than 115?

SW20Racer
03-16-2008, 11:00 PM
he needa run frub da cops!

derrrrr....

ms!3
03-16-2008, 11:02 PM
gubenor, cant say ive heard that one before.

SnakeKack
03-16-2008, 11:06 PM
I don't wanna thread Jack or anything but when I had my interior apart when I was relocating my battery I noticed a brown wire going into my ECU was cut. My car has always ran fine and I forgot to look into it lol. I think the previous owner must have cut it. I've never tried to go 115 I don't see why I would. But is it bad that it's cut?

projectRDM
03-16-2008, 11:09 PM
its a brown wire from ecu i dont remember which 1... why do you need to go passed 115mph with a KA in socal whats the point?

No it's not. VSS wire is yellow/green, same on every Nissan chassis.

jdm538
03-16-2008, 11:15 PM
No it's not. VSS wire is yellow/green, same on every Nissan chassis.

then whats the brown wire for? good thing i never did that mod i would have hacked up my harness.

projectRDM
03-16-2008, 11:17 PM
then whats the brown wire for? good thing i never did that mod i would have hacked up my harness.

Only brown wire I know of on an S13 engine harness is power for the O2 sensor from the underhood plug. VSS has always been yellow/green, all 240SX, 200SX, Altima up until at least 2001.

downshift_sideways
03-16-2008, 11:21 PM
Ouch here is a dumb thread.

-1 Socal
+1 Norcal

nismo tuned s14
03-17-2008, 07:34 AM
gubenor = govenor on the island of anguilla. i wouldnt worry too much about taking it out unless you reach speeds like that on a track. there is no telling, its probably saved you a time or two.

BoostinGST
03-17-2008, 07:50 AM
depends on what chassis you have, for an s13 you have to go 100mph+ and run into a brick wall... for an s14 you need to eat chicken wings in your car and cut every wire in the car.

dori_sil8t
03-17-2008, 08:32 AM
where can i get one of these gubenors? are they cheap??
if you wanna go past 115mph u need a flux capascitor.

eye-5
03-17-2008, 09:35 PM
I hit 120 in my RSX on the front & back straight at road america. I would think I could go faster in a SR20DET. It would suck to hit the governor or "Gubenor". I was already out gunned by the vettes and exotics that day.

soreballz
03-18-2008, 03:55 AM
Goddamnit, I wish I wasn't out of rep for the day.

89singlecamnoob
03-18-2008, 03:56 AM
Only brown wire I know of on an S13 engine harness is power for the O2 sensor from the underhood plug. VSS has always been yellow/green, all 240SX, 200SX, Altima up until at least 2001.

let us not forget the brown wire for the ghetto sleepy-eyes mod :D :keke:

spooledyou33
03-18-2008, 05:25 AM
does anyone know how to take off the gubenor on a s-13 ka24de cus im getting tired of topping out at 115
yo iam not sure because i never had a stocker always was turbo but have to agree why do you need to do more then 115 not sure thats so safe....