HELP with JDM zenki sideskirts!

[TurboSilvia7587]

I just bought a pair of JDM zenki s14 sideskirts and im not sure of how to put them on. The jdm sideskirts have these tab looking things on the back but on my car there are no holes for those tabs to go. so if you know ..please help me out.

-Brian

[OptionZero]

drill holes

iirc zenki had the holes but not kouki, i think that was the case when Turdz and i put on zenki skirts

[xtreme_s14]

double sided tape! enjoy!

[DriftinAndy]

some elmers glue should do the trick!

[s13speeddrft]

as said above just mock up and drill your own holes and/or some double sided tape.

[hrdprkin180]

I would just tear off the clips use some 3M double sided tape. Thats what I did with mine, but if ur good with measurements just drill the holes instead.

[TurboSilvia7587]

I would just tear off the clips use some 3M double sided tape. Thats what I did with mine, but if ur good with measurements just drill the holes instead.


how bout the part in the back of the sideskirts because those holes dont line up with the car for some reason

[sean350z]

The back part requires special clips which are impossible to find. You could fabricate something, drill new holes in the skirts and fender lips, or just double sided tape it up.

[projectRDM]

Or, order them from the dealer.

http://www.courtesyparts.com/betasite/78910b-nut-240sx-s14-1995-1998-p-138697.html

Same as the Kouki.

[wylin]

double sided tape! enjoy!

with mine we drilled 1-2 new holes per corner so we could use the mud flap mounting points and then we used double sided tape to mount it. Since mine came without hardware and i didn't want to drill into the body.

u can kind of see in these old pictures.
http://farm3.static.flickr.com/2009/2362849567_ee2cab8467_o.jpg
http://farm3.static.flickr.com/2388/2362849439_36302ff119_o.jpg
http://farm4.static.flickr.com/3255/2363679930_d03fe9cfbd_o.jpg

with this set up it, the skirts stayed flush for about 4 years, then i had to take them off and retape them.