View Full Version : Lowest Seat Rails Available...(Bride)
BlackZenkiS14
03-11-2008, 07:54 PM
I have a brand new Bride Zeta III on my way over from the motherland for me, and i need the lowest seat rails i can possibly get for it.
What are the lowest rails available that will fit my seat and car (s14)?
And what online retailer has the best price on them?
Thanks in advance.
burnsauto
03-11-2008, 07:56 PM
brides rails sit pretty low. not sure if they're the lowest ones you can get. should be around 180-190 depending on where you go.
BlackZenkiS14
03-11-2008, 07:58 PM
Yea, i guess i was more wondering what specific rail? Like the FG? Or something else lower?
And im hoping that one of the sponsor's has a hot deal going on for brackets right now...
One thing i think would be nice is whats the lowest seat rail available, and how much lower does the seat sit than the OEM seats?
azndoc
03-11-2008, 08:13 PM
I think the Nagisa Auto ones sit pretty low. Ask Logan.
SW20Racer
03-11-2008, 08:16 PM
does your seat have to slide? if not i have some blueprints you might want.
also, do you need side mount or bottom mount? i dont know enough about bride seats to know right off the bat which seat takes which rails
the blueprints are for side mounts, but bottom mounts would be too easy. (2 stips of stainless bent to fit, and bolted in.)
and i should mention the blueprints i have are made to allow you to adjust the incline of the seat (effectively reclining it)
khilgers
03-11-2008, 08:30 PM
assuming zeta III's are side mount, FRsport has a ton in stock, I got my Bride FG's shipped for $175.
SW20Racer
03-11-2008, 08:32 PM
here it is. ive tried to put this link as my sig but i apparently dont have the blue key card or whatever so here: http://www.rorty-design.com/files/Rorty%20Basic%20Aluminium%20Seat%20Pattern.pdf
seat mounts are @ the bottom of the page
burnsauto
03-11-2008, 08:47 PM
i should be putting in a seat with a bride MO rail in my car next week...so i'll PM you and send you some pics
Pstl_pete
03-11-2008, 09:19 PM
Has anyone tried the new buddy club seat rails? I hear they sit really low as well.
BlackZenkiS14
03-11-2008, 10:14 PM
Yes, the Zeta III is a side mount seat. Hoping for pics, personal experience, etc...
I need it to be able to fit someone 6'2" with a helmet.
LongGrain
03-11-2008, 10:15 PM
i have the buddy club super low down race spec rail, sits plenty low enough for me, and i dont even have the seat at the lowest position.
g6civcx
03-12-2008, 07:04 AM
Bride FG sidemount is the lowest possible. I can mount my Kirkey to the point where it rubs the floor bar.
THe only other option is to cut out the floorboard and mount the seat flat.
BlackZenkiS14
03-12-2008, 07:36 AM
What online retailers have the best prices on these brackets?
94cc0rd
03-12-2008, 08:56 PM
dood... thenismoshop has them for 165 right now IN STOCK...
bride FG are super hard to find in stock anywhere
cop them NOWZZZ
zilvia> advertisor section
tgd89
03-12-2008, 10:15 PM
Yeah I'm 5'10 and I have my zeta II on the top position on the bride FG rail, and I fit fine with a helmet. I got mine from frsport for like 170-180ish.
BlackZenkiS14
03-12-2008, 11:14 PM
I just ordered my FG rail today from Justin at Nismo for 195 shipped.
bsilvias13
03-13-2008, 04:24 AM
i built my own seat brace when i built my cage it took 8 hours from start to finish and the aluminum race seat i have touches the floor. so ide say its pretty low.
alwaysnboost
12-25-2017, 09:50 AM
Hate to revive an old thread, but equally don't want to start another so here it goes.
I want to purchase a set of reclinable racing seats. Most likely bride low max. Is the general consensus bride rails are the lowest? If so, what model bride do I purchase. Thanks!
dukiespice
12-25-2017, 11:54 AM
I have a brix in my car and use the the MO rail. I got it from frsport. It sits low, I’m 6’0 and still have a lot of head room. I know the mo works with some other seat brands too, but double check. Hope this helps.
alwaysnboost
12-25-2017, 08:06 PM
I have a brix in my car and use the the MO rail. I got it from frsport. It sits low, I’m 6’0 and still have a lot of head room. I know the mo works with some other seat brands too, but double check. Hope this helps.
Great thank you!
TheRealSy90
12-26-2017, 08:34 AM
Actually, general consensus is that the Nagisa/NAMS single lock side mount rails are the lowest you can get. However finding them will probably be difficult. I can touch the bottom of my seat to the floor pan, and that's with seat sliders.
alwaysnboost
12-26-2017, 10:32 AM
Actually, general consensus is that the Nagisa/NAMS single lock side mount rails are the lowest you can get. However finding them will probably be difficult. I can touch the bottom of my seat to the floor pan, and that's with seat sliders.
Got it. Did some more thinking. I want to do a reclinable seat next. This bucket kills me on a street car. My thoughts are go with mo rails and get a Bride recline. Lowest bride reclinable would be Brix I assume?
SteeleBrothersDrifting_Mike
12-26-2017, 11:00 AM
street faction rails sit lower than brides from what I've heard.. I had to hammer my floor down for the bucket seat to fit at the lowest setting. Also changes depending on where you seat mount holes are on the seat itself
dukiespice
12-26-2017, 12:54 PM
Got it. Did some more thinking. I want to do a reclinable seat next. This bucket kills me on a street car. My thoughts are go with mo rails and get a Bride recline. Lowest bride reclinable would be Brix I assume?
I would check out the euro 2 ergo 2 and digo I don’t have any experience wth them but they have less bolsters and look like they sit a little bit lower than a brix IMO.
BlackZenkiS14
12-26-2017, 07:40 PM
Holy shit, 9 year old thread lol
vBulletin® v3.8.11, Copyright ©2000-2021, vBulletin Solutions Inc.