SOHC Auto to 5spd Reverse Lights???

[PROJECT240SX]

Hey guys,

I've tried searching and have numerous links to wiring but none of it seems to apply to what I am doing.

All I'm trying to do is hook the reverse lights:duh: . I've pretty much followed every write-up I have, and nothing has worked for the reverse lights.

Can someone please tell me how to wire them up? I've used a test light going to the connector for the reverse lights and have power going to the tranny and still noting.

TIA

Ivan

[Vision Garage]

are you sure you are connecting the right wires? which plug are you splicing to? I think it should be the third plug down on the side of your engine bay fuse box. Has like 5 wires on it.

[PROJECT240SX]

are you sure you are connecting the right wires? which plug are you splicing to? I think it should be the third plug down on the side of your engine bay fuse box. Has like 5 wires on it.

Ohooo, that might be the problem then, I am going off of the second plug which has the green/white and green/blue which I read to use on different write-ups.

Are you talking about the brown plug? Which is what I have third plug down. I am using the 5spd harness off of a DE and none of the wires match up on the second plug down. I have read that you can simplify this by using the Auto harness and tracing wires back. I am debating if I should go back to Auto harness, my Auto harness is kinda hacked though so I might just have to find another one.


Thanks,


Ivan

[Vision Garage]

no you got the right one? I used the auto harness and just spliced the wires. Check to see if you have current going through the wires. All that has to be done is you run the green/white and green/blue to the reverse sensor.

[SR20n00b]

maybe a bad sensor?

[KiLLeR2001]

make sure your reverse bulbs are good and the harnesses are plugged in ;)

but yes, green/white and green/blue are the correct wires.