emanage blue instead of reflash

[doug86]

So here are the basics, my sr20det has hks cams stage 2, 256 intake, 272 exhaust, bc valve springs, and 16 psi on a gt28rs (as well as cometic head gasket, arp head studs). Should i be getting my ecu reflashed or will my emanage blue be able to do the amount of tuning needed to support these mods? at this rate will i need a z32 MAF or will the ecu only read that if its reflashed?

[slider2828]

Its nothing big deal. Emanage will handle it... It handles up to 660cc injectors fine. ANything more I would suggest standalone. THe mods you have listed doesn't talk anything about the ability of any ecu unit. The restrictions are usually injector handling.

[johngriff]

I would go with Emanage Ultimate over the blue for that.

[doug86]

well the reason i am thinking emanage blue is because i have a brand new one sitting here with injector harness, ignition harness, 3.0bar map sensor and support tool. I just wasnt sure about how the stock ecu is going to handle the excess power coming through the MAF sensor, since apparently sr20 maf sensor doesnt read over 300 hp or something?

[slider2828]

its fine.....

[doug86]

Well i sold my emanage blue because so many people with SR's had complaints about it. I decided i will be contacting emance rom tuning as soon as my ecu comes in as thats the route i prefer to go after. Thanx for all the advice guys :)

[bo2o]

emance too many bad reviews.... i would go with efi specialist or biki, or ethaphay for got to spell it but you know what im talking about.

but as for emanage blue yes it can handle your setup.
only thing about emanage its a little hard to set up and you always need a laptop
recommend getting a wideband o2 also.

[doug86]

how is JWT for ecu tuning?

[naheed187]

i suggest getting the hks f-con. its an amazing unit with lots of potential. i get full boost at 2500 rpm.