Front camber kit for 240sx?

[turbo_ls_civic]

Ok i am going to lower my 95 about 1.8 inch and here is the problem. I found rear camber kit for it but i can't seem to find front camber kit except for camber plate? Sorry i been a Honda person and this is my first 240sx and have been looking around here for a bit now.Can someone tell me if i even need a front camber kit for the 240sx or where to find one..or the CAMBER PLATES are what needed

[S14DB]

Camber Plates are the best but you can notch the upper bolt holes on the spindle bracket of the shock.

How are you dropping the car? That is a lot for springs.

[punxva]

ok well since everyone in the honda world loves using the words camber kits, here's an explanation... for a 240sx, in the front you use camber plates, and the rear you get RUCAs, or rear upper control arms... So for the front get plates...

[DaPCWiz]

in the front you can control:

camber - camber plates
toe - tie rods
caster - tension rod

in the rear you can control:

camber - rear upper control arm
toe - traction arm and toe link

edit: punxva you beat me to the post, lol.