PDA

View Full Version : Whole set of R33 brake calipers with rotors and pads!!!!


garagelu
02-27-2008, 07:00 PM
You are looking at a full brake system from a 1998 R33 Nissan Skyline. This brake kit I am selling is the best condition brake kit you will ever find. All four calipers were pulled off at 27,000 miles. As you can see from the picture the brakes look like new. That is the paint that Nissan put on it from the factory. Only other thing to mount these up are the brake line which you can get from splparts.com for really cheap.

ROTORS: As many of you know, R33 296 x 30mm rotors are incredibly expensive and hard to get ahold of. These rotors are bigger than the 300zx 280 x 30mm rotors. And if you use 300zx rotors with r33 calipers the brake pad wont contact right. The rotors that are included are AUTHENTIC Nissan factory rotors (see pictures). Not cheaply made rotors from China. These rotors cost me a fortune. It took me a while to find a place that sold them and when I did find them, I payed a steep 150 PER rotor for them.

Also just a few minor details I want to clarify....The rear brake pads are Nismo brake pads that I bought only a few months ago. They still have 90 percent pad life left. The front brake pads have about 50 percent pad life left. The rotors were bought about one year ago and only have about 5,000 miles on them. All the seals and boots on the caliper are in perfect condition. None are torn so there is absolutely no need to rebuild these. These calipers are straight bolt on for the 240sx and 300zx.

This auction includes:
Complete set of 4 r33 skyline calipers (front and rear)
Front set of 4 brake pads and rear set of 4 NISMO brake pads
2 front R33 296 x 30mm rotors (authentic Nissan)
every shim, clip, and pin that you need

Please email me with any questions or concerns. Email is [email protected]

PICTURES: http://s134.photobucket.com/albums/q100/garagelu/

PRICE: 500 shipped....keep in mind this is going to cost a bit to ship.

floodo1
02-27-2008, 07:56 PM
so its complete, except for rear rotors??

sr-20
02-27-2008, 08:02 PM
Is this (http://cgi.ebay.com/ebaymotors/R33-SKYLINE-BRAKE-CALIPERS-240SX-SR20DET-S13-S14-300ZX_W0QQcmdZViewItemQQcategoryZ33563QQihZ002QQit emZ120227512934QQrdZ1QQsspagenameZWDVW) you on ebay?

garagelu
02-27-2008, 08:37 PM
its complete except the rear rotors, yes. Rear rotors can be bought for as low as 30-40 dollars per rotor.

And yes thats me on ebay. Is that a problem?

miami-z
02-28-2008, 09:43 PM
hey if you still have them next wednesday i'm all over them!!

speedgod^s13
02-28-2008, 10:25 PM
Are the calipers aluminum? So, I can run these rears, and still keep my stock ebrake lines, and stock master cylinder?

garagelu
02-28-2008, 10:59 PM
This brake conversion wouldnt be much different than a 300zx brake upgrade. You still need 300zx 2+2 ebrake lines for s13 or r33 ebrake lines for s14. Also it would be a good idea to upgrade to z32 master. Its your choice though. And yes of course these calipers are aluminum.

miami-z- just email me or pm me when you are ready to buy them

Slow Poke
03-03-2008, 11:05 AM
Pretty sweet deal!

INeedNewTires
03-03-2008, 04:42 PM
thats a SWEET ASS deal, i used to sell reman'ed 300ZX fronts with rotors, lines, pads for $500 shipped, this is like free rear calipers and even better brakes! free bump someone buy this for sick ass brakes...

miami-z
03-03-2008, 10:37 PM
hey whats the size of the calipers? 30mm or larger?

garagelu
03-04-2008, 07:25 AM
hey whats the size of the calipers? 30mm or larger?

read my description it says 296 x 30mm

UPDATE: I sold the rotors separate from the calipers already so everything you see in the picture except the rotors are for sale. PRICE LOWERED TO 400 SHIPPED!!!!

Also I have seen people using 300zx rotors with this setup and it seems ok.

garagelu
03-21-2008, 09:50 AM
anybody still interested in these. Again, just selling the calipers now. They are basically brand new. What better deal can you expect?!

jsasrsr
04-26-2008, 05:35 PM
do you still have the whole set left?

devonkyle77
04-27-2008, 09:19 AM
am i missing something? i dont see pics of the brakes on that link.