Foxcolt
02-27-2008, 08:42 AM
Well, the time has finally come for me to let go of my car. I just don't have the time/money/place/tools to keep working on her. So I'm hoping there's somone out there that can give her a better home than I can.
A bit on the cars history.
I purchased this car from a friend after my old 240sx got totaled in 04. The SR was already installed and many of the engine mods were already done. Since then I've done a few small adjustments. However since moving into a new Apartment I could not afford to keep the car up. So I had it in storage for a bit before bringing it back to my apartment parking lot. During the time it was there (about a year) it was broken into once. The kids who broke into the car stole the head unit and boost and A/F guages on the A pillar and my Apexi Boost controller.
I've since replaced the turbo coolant return line which was leaking a bit and in doing so I had the motor compression tested. Everything checked out perfect and I can provide documentation if needed (Just need to call the shop and get the printout).
Price: $9500
Contact information:
email - [email protected]
or PM me on this board.
List of mods.
Engine
- S14 SR20DET currently running on the stock T28 at stock (5psi) boost. Motor has about 50k on it. Bought and installed at 47k~
- Nismo metal head gasket
- Nismo 555cc injectors
-300zx mafs
-Jim wolf retuned ECU (yuck I know, always meant to go stand alone)
-Fuel Pressure gauge located in the engine bay
-Koyo Radiator w/ Nismo Rad cap
-Dual FAL electric Fans with variable thermal controller located in the engine bay.
-Greddy Intake (Probably needs to be replaced)
-Greddy Intercooler including all pipes and couplers
-Greddy BOV
-Nismo Clutch
-HKS Hi Power Exhaust including 3inch downpipe and 3inch turbo elbow. (The car is LOUD)
-HKS Step 2 Cams 264/272 (Have stock ones as well if needed)
-300zx Throttle body (have stock s14 SR one if needed)
Suspension
-JIC-Magic FLTA1-US Suspension
-300zx Front brakes aluminum.
-5lug swap
-98 240sx SE VLSD
-Slotted and Cross drilled rotors (probably need to be replaced as well)
-Cusco rear links (Not installed)
- Mustang GT wheels painted in Gun Metal
Interior
- Personal Steering wheel (Horn currently not operational but it's an easy fix)
-Momo Shiftknob
-Modified stock shifter (I always prefered modifing the stock ones rather than buying a short shifter)
-SPI Oil pressure, Air Temp and Volatage gauges
-Apexi Turbo Timer
-Stock Radio
-Sparco Seatbelt (For show..do NOT recommend using these while driving)
-Viper alarm
I'm sure there are a few mods I'm forgetting, but I listed out all the imporant ones. Any questions please don't hesistate to ask.
Pictures
http://img.photobucket.com/albums/v412/Foxcolt/DSC04092.jpg
This was taken awhile back after I got the engine detailed, I've since removed all the stickers from the Core support.
http://img.photobucket.com/albums/v412/Foxcolt/Car2.jpg
http://img.photobucket.com/albums/v412/Foxcolt/Car3.jpg
Lip needs to be repainted (damn rocks)
http://img.photobucket.com/albums/v412/Foxcolt/Car4.jpg
http://img.photobucket.com/albums/v412/Foxcolt/Car5.jpg
http://img.photobucket.com/albums/v412/Foxcolt/Car6.jpg
http://img.photobucket.com/albums/v412/Foxcolt/Car7.jpg
http://img.photobucket.com/albums/v412/Foxcolt/Car8.jpg
As you can see the car needs a new center console bezel and A pillar molding, I can source these if need be.
A bit on the cars history.
I purchased this car from a friend after my old 240sx got totaled in 04. The SR was already installed and many of the engine mods were already done. Since then I've done a few small adjustments. However since moving into a new Apartment I could not afford to keep the car up. So I had it in storage for a bit before bringing it back to my apartment parking lot. During the time it was there (about a year) it was broken into once. The kids who broke into the car stole the head unit and boost and A/F guages on the A pillar and my Apexi Boost controller.
I've since replaced the turbo coolant return line which was leaking a bit and in doing so I had the motor compression tested. Everything checked out perfect and I can provide documentation if needed (Just need to call the shop and get the printout).
Price: $9500
Contact information:
email - [email protected]
or PM me on this board.
List of mods.
Engine
- S14 SR20DET currently running on the stock T28 at stock (5psi) boost. Motor has about 50k on it. Bought and installed at 47k~
- Nismo metal head gasket
- Nismo 555cc injectors
-300zx mafs
-Jim wolf retuned ECU (yuck I know, always meant to go stand alone)
-Fuel Pressure gauge located in the engine bay
-Koyo Radiator w/ Nismo Rad cap
-Dual FAL electric Fans with variable thermal controller located in the engine bay.
-Greddy Intake (Probably needs to be replaced)
-Greddy Intercooler including all pipes and couplers
-Greddy BOV
-Nismo Clutch
-HKS Hi Power Exhaust including 3inch downpipe and 3inch turbo elbow. (The car is LOUD)
-HKS Step 2 Cams 264/272 (Have stock ones as well if needed)
-300zx Throttle body (have stock s14 SR one if needed)
Suspension
-JIC-Magic FLTA1-US Suspension
-300zx Front brakes aluminum.
-5lug swap
-98 240sx SE VLSD
-Slotted and Cross drilled rotors (probably need to be replaced as well)
-Cusco rear links (Not installed)
- Mustang GT wheels painted in Gun Metal
Interior
- Personal Steering wheel (Horn currently not operational but it's an easy fix)
-Momo Shiftknob
-Modified stock shifter (I always prefered modifing the stock ones rather than buying a short shifter)
-SPI Oil pressure, Air Temp and Volatage gauges
-Apexi Turbo Timer
-Stock Radio
-Sparco Seatbelt (For show..do NOT recommend using these while driving)
-Viper alarm
I'm sure there are a few mods I'm forgetting, but I listed out all the imporant ones. Any questions please don't hesistate to ask.
Pictures
http://img.photobucket.com/albums/v412/Foxcolt/DSC04092.jpg
This was taken awhile back after I got the engine detailed, I've since removed all the stickers from the Core support.
http://img.photobucket.com/albums/v412/Foxcolt/Car2.jpg
http://img.photobucket.com/albums/v412/Foxcolt/Car3.jpg
Lip needs to be repainted (damn rocks)
http://img.photobucket.com/albums/v412/Foxcolt/Car4.jpg
http://img.photobucket.com/albums/v412/Foxcolt/Car5.jpg
http://img.photobucket.com/albums/v412/Foxcolt/Car6.jpg
http://img.photobucket.com/albums/v412/Foxcolt/Car7.jpg
http://img.photobucket.com/albums/v412/Foxcolt/Car8.jpg
As you can see the car needs a new center console bezel and A pillar molding, I can source these if need be.