Wireless Remote

[Reson8r]

I have a 96 300ZX TT, and I lost the one remaining factory remote I recieved with the car. It worked great on all buttons.
The replacement remotes from Courtesy Nissan look identical and my Local Town and Country Nissan checked them out and they work on their testing station.

Problem is that there seems to be no less than 5 ways to program these things, and none of them are working.

Does anyone have definite knowledge on how to program the factory remotes for the factory system for a 1996 300ZX TT?

Hopefully I will not have to replace a faulty reciever module in the end.

Thanks,
Mike
Please email me if you have the answer at [email protected]

[Reson8r]

Anyone have any ideas for a 1996 300ZX TT.
I lost my one working remote, and bought 2 new ones from Courtesyparts.com Neither of them will program and I believe that it is the methods that people are telling me to use. I have recieved 5 different methods from various sources and none of them are workin right. All of the dealers say they are difficult on the 300ZX's and to stick with it.
There is something about popping the rear hatch, turning the key to Assy, and locking an unlocking the doors in various versions of what I have found but not all. Some mention the Flashers blinking and some do not.
I suppose the reciever could be having a problem also, but hope to find a proven method to program on these cars before going that route.


Does anyone have a proven method for programming the remotes for a 96 300ZX TT before I wear out my ignition switch???

Thanks
Reson8r
alias [email protected]

[-E-]

Try this (http://www.zilvia.net/f/cgi-bin/ikonboard.cgi?act=ST;f=6;t=10164) im not sure if all nissan factory remotes are programmed like this but it worth a try <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/smile.gif" border="0" valign="absmiddle" alt=':)'>

[Reson8r]

Thanks for the try, but no luck.