what parts would you like made

[dirtdiggler666]

Hey guys,

I have the availability to use, a single axis flow water jet machine. I was just wondering, if their was any parts you want to see made or made better. Thanks for your input.

Danny

just to give you a idea if you don't know what a water jet is
http://i43.photobucket.com/albums/e398/dirtdiggler666/waterjet3.jpg

[Pank]

exhaust flanges, ls1 engine plates

[Matej]

You could make EGR block plates.
http://images.auctionworks.com/hi/55/54747/ka24b0p.jpg

[mkiv98]

ninja stars man.

[kingkilburn]

VH block to VG trans adapter.

[TheRonTom31]

Custom Height GT WING STANDS PLEASE PLEASE PLEASE PLEASE PLEASE.

I know many many people on here would love you if you did. LOVE!!!

[csb101]

+1 for the ninja stars lol :bigok:

[maxgohan]

definitely trans adapter plates

[jfc3po]

definitely ninja stars.....


maybe throwing daggers too..

[A Spec Products]

Sent you a PM

But yeah, I think you should probably give people an idea of

- what is required (i.e CAD file, etc)
- how much it typically runs (since I'm guessing its not cheap)
- is there minimum quantity required
- what materials can you cut, get, and how does that affect price

Cause I think price is going to dictate whether or not people can REALLY do these sorta things

[dirtdiggler666]

thanks logan

But im not really going for the one off type of deal, If i make somthing i would like to make and sell alot.

And as for file you can use cad or photoshop but i will be doing this so it will not matter, unless you want somthing one off but yes it will cost you.

and as some of you smart ones know this is not cheap to run at all

as far as materials go the water jet can cut just about anything
but guys i want to keep this to car parts please.

hope this helps

[mkiv98]

i bet a lot of us would buy ninja stars in bulk

[origin_s135]

i bet a lot of us would buy ninja stars in bulk

he's really serious, it's his second post about ninja stars! i'm down for some zilvia ninja stars too. ++++ haha

[MELLO*SOS]

hks external wastegate dump flange cause they don't seem to exist. if they do someone please link me.

[dirtdiggler666]

keep it coming guys

so far i got gt wing stands and trans adaptor plates

but would they sell??

[DOOK]

I think the GT wing stands would sell on all competitive car forums, not just ours.

[silnismo]

Start making the EVO/STI conversion brackets, definately alotta interest there. You count me down for one if you do decide to make em. and you can probably push them at 100-150$ a pop generating a good amount of profit too.

http://www.zilvia.net/f/showthread.php?t=93748&highlight=sti+brembos
heres the link.

needs to be at least made out of steel though.

[babowc]

^that'd probably wont sell as much..

more like Z32 brake adapters for Z33 rotors.
if you knock them out for under $50, i'm sure you'll sell alot, and it'd probably be cheap to produce as well.

i'm not familiar with steel strengths, so i'll leave that up to you :)

[hustlervibes]

Start making the EVO/STI conversion brackets, definately alotta interest there. You count me down for one if you do decide to make em. and you can probably push them at 100-150$ a pop generating a good amount of profit too.

http://www.zilvia.net/f/showthread.php?t=93748&highlight=sti+brembos
heres the link.

needs to be at least made out of steel though.

I'm definetely down for those as well.

[DOOK]

the EVO/STi brackets wont' sell as well as you'd think because the price difference between those brembos and the Z32 fronts don't warrant getting them for the performance gained. The adapters to space Z32 calipers out for larger Z33 rotors may be a different story though, however the Z33 calipers are expensive and hard to find sometimes.

[projekt_s13]

Ninja Stars!!!!

[LongGrain]

RB20/RB25 T3 turbo exhaust flanges.

their a stupid 6 bolt pattern instead of the usual 5 or 4. NO one makes a flange for them, you can get a whole downpipe with a flange, but it only fits skylines. this would be great for people who want to use the skyline ball bearing T3 turbo on KA-T setups and what not.

[96Turbo]

make an oil filter block off plate. Similar to this tomei piece. I would definitely buy one. you could do it much cheaper than they sell them for too
http://i272.photobucket.com/albums/jj187/crazyhazey33/product_thumb.jpg
http://i272.photobucket.com/albums/jj187/crazyhazey33/2.jpg

[DOOK]

make an oil filter block off plate. Similar to this tomei piece. I would definitely buy one. you could do it much cheaper than they sell them for too
http://i272.photobucket.com/albums/jj187/crazyhazey33/product_thumb.jpg
http://i272.photobucket.com/albums/jj187/crazyhazey33/2.jpg

that's a little more intricate than I think he's thinking of doing...

[96Turbo]

but a flat slab of aluminum would work just as well as that piece. it doesn't have to have the lower sides where the screws go in. just cut out that shape, and drill a few holes in it, and thread two of them. and only do one hole for a sensor, lose the one on the side

[dirtdiggler666]

ya that looks to be made with a cnc mill, just a little over my head just of yet. but i think i can make it a little more simple and not as bling.

thanks guys for the ideas so far


danny

[SW20Racer]

you could start cranking out a kirkey style seat(just ship it flat and let the end user get it bent and welded)...i have a template if you want it...it seems like it would be profitable and you could make non-adjusting seat brackets as well

[kingkilburn]

Check out vh45de.com I think there are a lot of people who would love trany adapters. You should ask at hybridz.org too.

[02BRB20]

make this so ka-t ppl can run OEM SR Manis
http://img54.imageshack.us/img54/5486/kasrmodeq8.jpg

[extra-made garage]

Check out vh45de.com I think there are a lot of people who would love trany adapters. You should ask at hybridz.org too.

Dirtdiggler, if you do get a groupbuy on these adapters, I'd be interested, too.

[dirtdiggler666]

The only prob would be i have to get a vh engine and a trans:-/, unless someone would let me have them for a few weeks.

so you guys want zilvia ninja star bottle openers:bigok:

[jfc3po]

The only prob would be i have to get a vh engine and a trans:-/, unless someone would let me have them for a few weeks.

so you guys want zilvia ninja star bottle openers:bigok:

YES!

Good for opening beer bottles and offing those pesky bad guy ninjas! DO IT! DO IT! DO IT!

[viperbite]

rwd sr20det water pump blockoff plate (cheap, easy, useful.) make one reliable and ill buy it. i dont wanna have to make one. screw that.

sr20det intake manifold flanges, billet aluminum (impossible to find)
sr20det exhaust manifold flanges, stainless steel

sr20det motor, to 300zx 5 speed transmission. bolt on adapter. *this will bring cash cash cash*

[satal95]

Ca18det coil pack cover I would so buy one since i'm missing mine

[KA-T_240]

make this so ka-t ppl can run OEM SR Manis
http://img54.imageshack.us/img54/5486/kasrmodeq8.jpg

.....wow. waste of time and money. seriously:confused:

[ANVIL]

how much would you charge for a o2 housing spacer?

like the mckinney one for rb25 swaps?

http://www.mckinneymotorsports.com/images/products/thumbs/130.jpg

this spacer adds clarance to o2 housing steering shaft area. Can be used with our kit to add more clearance or with other kits or crossmember to get clearance

a nice looking vented coilpack cover for rb25 also

[vvtisupra]

+1 for the Z32 brake calipers on Z33 brake rotors

[Tearlessj]

I think there would be a large interest in CTS-V brake adapters. I remember someone did it a while back and the bracket was not complicated at all. It came out total around $400 for the fronts.