PDA

View Full Version : Cleaning out my garage. Take a look!


Foxcolt
10-10-2002, 09:43 AM
Please don't email me unless your serious about wanting to buy. If you have questions by all means go ahead

95 KA head. No cams or cam towers. No.4 exhaust valve is chipped. Perfect for rebuild. - $100

S14 steering rack. Perfect working condition - $100

S13 steering rack. Tie rod ends slightly bent, easily fixable - $75

S14 exhaust mannifold w/o cat. $50

S14 intake mannifold. You can get this as a package w/ fuel rail injectors(stock) throttle body and all sensors that attach to the manny. Or you can purchase these seperatly. Just ask.

S14 front calipers - $40

180sx type X front calipers - These are bigger than stock. Uses maxima pads - $75

Four lug front spindles and rear hubs w/ flange - $50 (figured I'd try)

Drivers side s13 TC rod. Good condition - $30

S13 SR mafs - $50

Two black 4lug steelies w/ worn tires - $40

A set of s14 tear drop alloy wheel w/ tires 2 new and 2 need to be replaced - $100

S14 injen intake w/o mafs adapter and with pre drilled nitrous oxide holes <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/biggrin.gif" border="0" valign="absmiddle" alt=':D'>. I just taped the holes up when I didn't use it. 3 holes on bottom of intake can't been seen. - $50

All of these prices are without shipping. I am willing to barter on most of this stuff.
Paypal is best.
I've got tons of other stuff so if you need something just ask. If I don't have it i'm sure I can source it for you.

Thanks!
Jed Erdahl
[email protected]

hachiroku
10-10-2002, 11:55 AM
looking for the wedge that goes between rear view mirror and windshield for an S13...holds mirror in place so it won't vibrate at high speed....preferably from a tan interior

silviase
10-11-2002, 03:06 PM
Hey fox i tried to e-mail you not sure if i got thru.
Would i have to buy bigger rotors for the 240sx or
are the factory rotors fine? It would seem if i was
using the maxima pads i would have to go with bigger rotors.

Foxcolt
10-11-2002, 06:07 PM
Check your email <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/turn.gif" border="0" valign="absmiddle" alt=':turn:'>


Jed <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/devil.gif" border="0" valign="absmiddle" alt=':devil:'>

gabossie
10-11-2002, 06:51 PM
You have any interior trim pieces?? and I also need a left front hub assembly. <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/blush.gif" border="0" valign="absmiddle" alt=':blush:'>