Quick Question: Tie Rod Install

[rocksteady_racer]

Ok I got the outer tie rod disconnected. Now I'm trying to get the inner tie rod out. Is there a trick to it or something? I'm using a large adjustable wrench to try and break and free and holding the steering column part with a set of locking pliers. I tried turning both ways and no luck. Do you turn towards the lower control arm or away from it? I assumed towards it but still no luck. And how much pressure do you need to break them loose? Thanks in advance. I just can't get it free? I got my new tension rods on no problem (I know don't tighten the bolts til it's on the ground)? odd... Well thanks in advance for the help

[adrians_s13]

http://splparts.com/doc/SPLTieRodEnd/default.htm

hopefully that helps

[driftyour40]

when I did mine it took my friend and I to break them loose, so as long as you have that metal clip off, just try harder, lol. G/L

[cdlong]

it's just righty tighty, lefty loosey like 99% of everything else, but there is a locking clip or loc-tite (or both) on there. just lean on it i guess.