Complete RB26 w/ upgraded turbos, RB25 trans etc MASSIVE PART OUT

[Mark Slide Squad]

Ok my plans have changed for my car, so i'm parting out the RB26 project I was working on. Motor is an RB26DETT, head has been decked and block slightly honed at stock bore size (86mm) The motor is completely disassembled, and there are some aftermarket items too that I have. Here is a list of what I have and price (ask about shipping price).

R32 RB26DETT Head, decked and checked for flatness, hot tanked, with cams in perfect condition and caps, valves, cam gears, complete head. Ready to bolt on. WILL NOT SHIP! Pick up only. SOLD
http://i93.photobucket.com/albums/l68/markslidesquad/RB26head2.jpg
http://i93.photobucket.com/albums/l68/markslidesquad/RB26head5.jpg
http://i93.photobucket.com/albums/l68/markslidesquad/RB26head3.jpg
http://i93.photobucket.com/albums/l68/markslidesquad/RB26head1.jpg
http://i93.photobucket.com/albums/l68/markslidesquad/RB26head4.jpg

R32 RB26DETT Block and girdle, lightly honed by machine shop and checked for roundness, still stock 86mm bore, block checked for flatness. Ready to build up. WILL NOT SHIP!! Pick up only SOLD
http://i93.photobucket.com/albums/l68/markslidesquad/rb26blockandgirdle.jpg
http://i93.photobucket.com/albums/l68/markslidesquad/rb26block6.jpg
http://i93.photobucket.com/albums/l68/markslidesquad/rb26block7.jpg
http://i93.photobucket.com/albums/l68/markslidesquad/rb26block5.jpg
http://i93.photobucket.com/albums/l68/markslidesquad/rb26block4.jpg
http://i93.photobucket.com/albums/l68/markslidesquad/rb26block3.jpg
http://i93.photobucket.com/albums/l68/markslidesquad/rb26block2.jpg
http://i93.photobucket.com/albums/l68/markslidesquad/rb26block1.jpg

R32 RB26DETT crankshaft, checked by shop. Perfect shape. Ready to use. SOLD
http://i93.photobucket.com/albums/l68/markslidesquad/rb26crankmain.jpg
http://i93.photobucket.com/albums/l68/markslidesquad/rb26crank6.jpg
http://i93.photobucket.com/albums/l68/markslidesquad/rb26crank5.jpg
http://i93.photobucket.com/albums/l68/markslidesquad/rb26crank4.jpg
http://i93.photobucket.com/albums/l68/markslidesquad/rb26crank3.jpg
http://i93.photobucket.com/albums/l68/markslidesquad/rb26crank2.jpg
http://i93.photobucket.com/albums/l68/markslidesquad/rb26crank1.jpg


NEW 650hp -700+hp capable upgraded Garrett turbos, I built them myself when I was still working at Turbonetics. Super 60 trim compressor wheels, with -79 trim turbine wheels. One compressor housing has had the outlet machined off for special i/c piping I was going to go with. You can make an adapter, or weld a flange back on it, or go with custom i/c piping, up to you. $1300 for the pair. Ask about cost for shipping.
http://i93.photobucket.com/albums/l68/markslidesquad/turbos6.jpg
http://i93.photobucket.com/albums/l68/markslidesquad/turbos5.jpg
http://i93.photobucket.com/albums/l68/markslidesquad/turbos3.jpg
http://i93.photobucket.com/albums/l68/markslidesquad/turbos2.jpg
http://i93.photobucket.com/albums/l68/markslidesquad/turbos1.jpg
http://i93.photobucket.com/albums/l68/markslidesquad/turbinehsgAR.jpg
http://i93.photobucket.com/albums/l68/markslidesquad/turbwheelinducerdiameter.jpg
http://i93.photobucket.com/albums/l68/markslidesquad/turbwheelexducerdiameter.jpg
http://i93.photobucket.com/albums/l68/markslidesquad/compressorAR.jpg
http://i93.photobucket.com/albums/l68/markslidesquad/compinducerdiameter.jpg
http://i93.photobucket.com/albums/l68/markslidesquad/comphsgcontour.jpg
http://i93.photobucket.com/albums/l68/markslidesquad/compexducerdiameter.jpg

R32 RB26DETT OEM Polished Intake manifold, Complete with throttle bodies, head to TB plenum, linkage, AICV, and sensors seen in the pics. Professionally polished by a reputable shop. SOLD
http://i93.photobucket.com/albums/l68/markslidesquad/intakemani1.jpg
http://i93.photobucket.com/albums/l68/markslidesquad/intakemani5.jpg
http://i93.photobucket.com/albums/l68/markslidesquad/intakemani3.jpg

R33 GTS RB25DET 5 speed transmission, no grinds, shifts smoothly and no issues. You need this if you wanna do an RB25 or RB26 swap with big power. Forget the weaker RB20 trans. Used for about 2000 miles on my old car, and 40k km's before that. Hard to find these days. I have the shifter too. Custom trans mount not included. NO LONGER AVAILABLE
http://i93.photobucket.com/albums/l68/markslidesquad/RB25trans1.jpg
http://i93.photobucket.com/albums/l68/markslidesquad/RB25trans3.jpg
http://i93.photobucket.com/albums/l68/markslidesquad/RB25trans2.jpg

R32 RB26DETT complete valve cover set, stripped all paint off so it's ready to paint or powdercoat. I have the emblem that goes on the plug cover as well.
SOLD
http://i93.photobucket.com/albums/l68/markslidesquad/valvecoverset.jpg

R32 RB26DETT OEM polished turbo outlet plenum, had a professional shop do the polishing. Looks amazing! with hose and clamp. SOLD
http://i93.photobucket.com/albums/l68/markslidesquad/turbooutletpipe.jpg

R32 RB26DETT alternator, tested and works great $100

R33 RB25/RB26 Starter, tested and works great $100

R33 RB25 power steering pump (will need for RWD RB26 conversion) SOLD

RB26DETT Ignitor chip, plastic broke off end, but works fine $50

R32 RB26DETT Crank angle sensor, tested and works fine $100
http://i93.photobucket.com/albums/l68/markslidesquad/starteralternatorPSpumpcrankanglese.jpg

BRAND NEW ARP Head studs/nuts for RB26DETT. P/N ARP2000 202-4207 $250
http://i93.photobucket.com/albums/l68/markslidesquad/rb26ARPheadstuds2.jpg
http://i93.photobucket.com/albums/l68/markslidesquad/RB26ARPheadstuds.jpg

R32 RB26DETT Wiring harness, modified for S13, ready to use on your s13 chassis. SOLD
http://i93.photobucket.com/albums/l68/markslidesquad/rb26wiringharness.jpg

R32 RB26DETT OEM Fuel injectors, on two of them the plastic cover at the end is cracked, but they still work. $100 for all 6
http://i93.photobucket.com/albums/l68/markslidesquad/rb26stockinjectors.jpg

R32 RB26DETT Crank angle sensor bracket SOLD
http://i93.photobucket.com/albums/l68/markslidesquad/rb26wiringharness.jpg

R32 RB26DETT Crank timing belt gear $30
http://i93.photobucket.com/albums/l68/markslidesquad/rb26cranktiminggear.jpg

R32 OEM RB26DETT ECU. Remanufactured by Nissan. $100
http://i93.photobucket.com/albums/l68/markslidesquad/RB26ECU.jpg

R32 RB26DETT OEM turbo outlets with o2 sensors. $40 for the pair
http://i93.photobucket.com/albums/l68/markslidesquad/rb26turbooutlets.jpg

R32 RB26DETT OEM Pistons/rings and Rods set. 7 pistons total, one piston has damage, but have a spare piston in perfect shape for replacement. $150
http://i93.photobucket.com/albums/l68/markslidesquad/RB26pistons.jpg

R32 RB26DETT OEM exhaust manifolds, slightly ported/matched. In good shape. $75 for the pair
http://i93.photobucket.com/albums/l68/markslidesquad/rb26manifolds.jpg

RB26DETT/RB25 Coil packs, tested and they work. SOLD
http://i93.photobucket.com/albums/l68/markslidesquad/rb26coilpacks.jpg

R32 RB26DETT Coilpack harness, great condition. $50
http://i93.photobucket.com/albums/l68/markslidesquad/rb26coilpackharness.jpg

R33 RB25DET Coilpack harness, wires were cut for ignition amplifier, reconnect wires and it will work $30
http://i93.photobucket.com/albums/l68/markslidesquad/rb25coilpackharness.jpg

R32 RB26DETT crossmember, with pump, lower suspension arms, factory sway bar. Everything you see in the pic. $100
http://i93.photobucket.com/albums/l68/markslidesquad/r32crossmember3.jpg
http://i93.photobucket.com/albums/l68/markslidesquad/r32crossmember2.jpg
http://i93.photobucket.com/albums/l68/markslidesquad/r32crossmember.jpg

S14 rear bumper support/crash beam. Like new, $30
http://i93.photobucket.com/albums/l68/markslidesquad/s14crashbeam.jpg

Location: Thousand Oaks/Van Nuys CA 91406
Email: [email protected]
Payment: In person or money order or paypal (add 3%)

Thanks!

[95Kouki]

+1 to Mark...Man Knows His Shit...Good Luck With Sale

[drift freaq]

These are some smokin prices people. A RB25 transmission for $500 :eek:

[projectdrifter]

ill let my buddy know about the turbos.

[AznDrftr.]

Hella deals here man. Nice affordable prices.

[mayco_86]

Good prices on all these parts.

[S13Boosts]

best fs thread i ever seen...:kiss: gluck with ur sale

[slow40]

hells yeah, bump for you.

i might be interested in the rb26 valve covers for my stroked 25 (technically a 26) will they pop on or do i need the backing plate from the 26 for the front timing cover to bolt up

*edit, i found out i need the backing plate for the timing cover to fit. would you be willing to throw that in for $100 shipped?
consider it sold!

[Mark Slide Squad]

all PM's and emails replied to. These parts are a first come first serve basis. I can't hold anything for anyone. I've been screwed too many times for that!

[Mark Slide Squad]

Sorry for not replying to people's PM's over the weekend, I was out of town. As of right now everything for sale is pending. If the deal falls through then everything will be available still.

[brn2slid]

did it all sell? if not what is the full package price?

[Mark Slide Squad]

The buyer is giving me the run-around. He is having difficulty coming up with the money. Package price for everything is $4000, which is over $1500 less than what it would be if you bought everything separately from me. Let me know if you're interested.



did it all sell? if not what is the full package price?

[Nismoogle]

is the intake manifold still for sale? have money in hand!

[250sxdet]

hey mark, can i get the price for the coil packs and the power steering pump shipped to 91079? Thanks

[Mark Slide Squad]

PM sent to you guys about the intake manifold, p/s pump and coil packs.

[slow40]

p m s e n t

[250sxdet]

The payment has been sent for the coil packs and the ps pump. Thanks Mark.
Steven

[Mark Slide Squad]

Everything is still available guys, except for the p/s pump, coil packs, intake manifold and turbo outlet pipe.

[slow40]

harmonic balancer crank bolt?

[Mark Slide Squad]

harmonic balancer crank bolt?

sorry, don't have that.

[sillyvia13]

2 mafs?
[email protected]
and maybe the piping for them?
lmk

[Mark Slide Squad]

2 mafs?
[email protected]
and maybe the piping for them?
lmk

I have two Q45 MAFS that I was going to use if you're interested in those. $200 for the pair with pigtail. I don't have the intake piping though.

[Mark Slide Squad]

I've had a lot of interest in the Transmission, but sorry, no shipping on it. PICK UP ONLY.

[Mark Slide Squad]

After Christmas sale! 10% off everyhing! I need to get this stuff out the garage.

[Siizzzoooo]

$90 for the valve cover set? $100 shipped sound good?

SOLD, shoot me a PM for your PayPal address to confirm everything

[Mark Slide Squad]

Sizzzoooo I sent you a PM.

[Mark Slide Squad]

Valve cover set sold to Siizzzoooo

[Mark Slide Squad]

Updated the list. Need to get this stuff out of the garage !

[gun]

will you ship the crank? what about the rods too, willing to ship?

[Mark Slide Squad]

I will ship the crank and rods/pistons. Shipping will be expensive though because the crank is pretty damn heavy.

[slow40]

does the crank have the good snout for the oil drive?

*edit
nevermind, just saw the last pic.

[Mark Slide Squad]

the motor is an early R32 motor (before the crank revision). Jun auto sells a crank collar bushing that converts it to later style for about $80. Check here. http://www.junauto.co.jp/products/cylinderblock-part/oilpump/index.html?en#op-drvc

[abes]

Hey Mark,

Pm sent...

[Mark Slide Squad]

Abes, replied to your PM. List updated. Block, head and crank have been sold.

[noodl35]

good seller, received items very quick..

[v8hunting]

do you still have the crank gear ?

[racerx2k1]

10 month old thread.