SR/CA/KA-T Intake Pipe Group Buy!!!

[Pepperoni]

PipingPro.com Open Christmas Group Buy - Pro Intake Pipes

Thanks everyone, but the group buy is now over.

Keep a watch out for the advertiser's section. Next sale will be for intakes w/BOV recirc's, hotpipes, and more!

Aure

[azndoc]

sweet perfect timing.

I need one soon.

I'll send the payment tomorrow for a t25 one. Thanks

[punxva]

awesome was hoping this would happen again, i need a t28 for z32 maf, i'll paypal as soon as i get off work

[hstylez]

So none of the t25 intakes have a bung for recirculating the BOV like in your picture? I have a Type-S just like that and need a bung to recirculate. Can this be added at a added price?

[Pepperoni]

Nope in this group buy the intakes only have a catch can nipple, no BOV bungs.

If anyone reading this needs a customized one, then contact me with your engine info and what type of intake you're looking for.

I found out this morning that I have ONE T25 intake pipe already welded with a BOV bung like you need and its ready to ship. Doesn't have a catch can nipple though, did you need one?

[LongGrain]

would i be able to use this for a top mount setup? i'm running an RB T3 turbo on an SOHC KA. i'm not too concerned with filter placement, as long as i have a pipe with a filter and my N60 maf that goes to my turbo lol.

[Pepperoni]

lol yeah i've done a few top mount intakes, do you have any pics? send them to my email aurelianoislas AT yahoo.com

[Ninjabread]

I replied in my other thread, but I might take one.

[Pepperoni]

Thanks guys i was able to get all orders thus far shipped out today. Enjoy!

[Pepperoni]

I found out this morning that I have ONE T25 intake pipe already welded with a BOV bung like you need and its ready to ship. Doesn't have a catch can nipple though

The T25 intake with BOV bung I mentioned earlier is SOLD.

If you are looking for an intake with BOV bungs then please contact me. You will still get the zilvia price :)

[drift into a curb]

Hey is the bung on the stock t25 intake coupler 19mm? I was looking at the Tee off the valve cover and it's about 15mm (~5/8"). So does the stock ( I don't have this piece) rubber hose that goes from the valve cover to intake enlarge from 15 to 19mm? Can you help me figure it out. I'm deciding if I should just go with the 10mm because my catch can comes with 10mm and 13mm fittings.

[emersonLP]

Good price, poor product, even poorer customer service. It took over 2 months and probably 10 emails to get this made for my little t25.:down:

In his defense, after the first month, he did give me a partial credit back.


http://www.importatlanta.com/upload/files/615/100_0693_thumb.jpg
(http://www.importatlanta.com/upload/files/615/100_0693.jpg)

http://www.importatlanta.com/upload/files/615/100_0697_thumb.jpg
(http://www.importatlanta.com/upload/files/615/100_0697.jpg)

http://www.importatlanta.com/upload/files/615/100_0702_thumb.jpg
(http://www.importatlanta.com/upload/files/615/100_0702.jpg)

[Pepperoni]

Hey is the bung on the stock t25 intake coupler 19mm? I was looking at the Tee off the valve cover and it's about 15mm (~5/8"). So does the stock ( I don't have this piece) rubber hose that goes from the valve cover to intake enlarge from 15 to 19mm? Can you help me figure it out. I'm deciding if I should just go with the 10mm because my catch can comes with 10mm and 13mm fittings.

Yes it does enlarge to 19mm, well at least the stock hose does and end up as 19mm on the intake pipe. You should probably choose either 10mm and 13mm

..

Yeah we had a few problems with three employees at one point who were stealing packages and putting in our database fake tracking id's. Needless to say those individuals are gone now :nono: I didn't know about it until they were caught :ugh:

I believe this is the best bang for your buck intake; I don't anywhere say these are *perfect* products; if you're looking for perfection then there are alternatives (GReddy, Apex, etc.) but you'll also be paying the price. We're just here to provide an alternative customizable intake with a smaller price tag.

Anyway, no need to worry about wait time in this group buy since these are already fabricated and ready to go! I'm hosting the group buy myself and all packages are being shipped out same day/next day.

Also, the T25 intakes in this GB are Version 2 and thus no longer have that welded area anymore.

[emersonLP]

Well I do hope the customer service problem is fixed. That was my biggest complaint. The product is acceptable for such a reasonable price, but I was disappointed that the "custom" intake just had the extra port hacked off and welded up.

[Pepperoni]

I'm deciding if I should just go with the 10mm because my catch can comes with 10mm and 13mm fittings.

One more thing, I would highly suggest going with the larger of the two nipples, the 13mm.

[Pepperoni]

Well I do hope the customer service problem is fixed. That was my biggest complaint. The product is acceptable for such a reasonable price, but I was disappointed that the "custom" intake just had the extra port hacked off and welded up.

Believe me those were the top two concerns and both have been fixed and are trying hard to keep up. And about the extra port welded, there is an explanation for why it ended up getting welded shut, but it's just too long and it would sway the questions asked on this thread to off topic. Let's just say it was our attempt at making it carb legal (not in CA).

Oh and like I mentioned earlier, the T25 intakes in this group buy are Version 2 which means it no longer has the welded part.

[Tenchuu]

any chance RB25 ones?

[Pepperoni]

any chance RB25 ones?

Funny, you're the first one ever to ask. Surprising too, since RB stock intakes are more notorious for caving in under boost than SR ones.

How about you get me a pic of your engine bay and then I can see if the one I already made will work :bigok:

[adictd2b00st]

oooo this is perfect timing! i need one for a t28 w/ z32 maf! how much more to upgrade to the reinforced coupler?

[Pepperoni]

oooo this is perfect timing! i need one for a t28 w/ z32 maf! how much more to upgrade to the reinforced coupler?

Silicone couplers for T28 kit are $12 each, so $24 for two. Thanks let me know. I see you're pinked so you probably will want to email me instead lol

[Pepperoni]

I am almost out of all intakes; group buy is ending in about a week!

[bigOdom1]

still on? pm sent

[DALAZ_68]

im currently runninga T25 on my stock CA

any chance u guys would let me send the CA pipe i buy for the t25 for a discounted T28 pipe once i upgrade? just a thought :x:

[ALEXTHESUS*PECT]

any more t25 ones?

[Pepperoni]

still on? pm sent

Pm replied

im currently runninga T25 on my stock CA

any chance u guys would let me send the CA pipe i buy for the t25 for a discounted T28 pipe once i upgrade? just a thought :x:

Yes.. we can work something out :)
PM sent

any more t25 ones?

Only a few left, PM sent

[DALAZ_68]

Pm replied



Yes.. we can work something out :)
PM sent



Only a few left, PM sent


thanks for the PM

[ryebreadz28]

Any of the T28 Pipes left? Got money ready to go!! :D

[DALAZ_68]

which pipe would be proper for a t28 from an sr on my CA18 ???

[Pepperoni]

Any of the T28 Pipes left? Got money ready to go!! :D

Good timing, I'm almost out! I've only got 2 left. Payment info is in the first post

which pipe would be proper for a t28 from an sr on my CA18 ???

These intakes are designed around the stock turbo inlet, not engine. So if youre using the stock T28 inlet pipe, then you need the T28 intake pipe.

[ryebreadz28]

Payment sent! Thanks!

[azndoc]

Paypayl sent for a T28 pipe.

[Pepperoni]

Thank you. Here is an update, since the GB is almost over

I have:
1 - T25 intake w/13mm catch can nipple
2 - T25 intake w/stock catch can nipple
2 - GT2871R intake w/stock catch can nipple
T28 intakes are GONE

[DataXUnknown]

Any T25's left????????? I need one so freaking badly!!!!!!! whens the deadline!? I will deposit money probably tommorow! wow im so glad i found this group buy, I never woulda thought of looking here for intakes. Thats one thing I'm missing to get my SR running lol.

Edit: Well duh I'm a retard, you just said you have the t25 right there hahah, sorry didn't pay attention too much. Can someone explain to me about the catch can nipple? Do I have to have a catch can to make this work?

[Pepperoni]

Any T25's left????????? I need one so freaking badly!!!!!!! whens the deadline!? I will deposit money probably tommorow! wow im so glad i found this group buy, I never woulda thought of looking here for intakes. Thats one thing I'm missing to get my SR running lol.

Edit: Well duh I'm a retard, you just said you have the t25 right there hahah, sorry didn't pay attention too much. Can someone explain to me about the catch can nipple? Do I have to have a catch can to make this work?

Hey,
Yep I have only a couple of T25 intakes left like i mentioned in the earlier post

As for the catch can explanation, if you're using the hose that connects the T on the valve cover and the intake, then the "stock catch can nipple" is the one that you would need.

OR if you connect that T to a catch can and do not connect your catch can to the intake, then I can supply a cap for the intake.

I hope I explained it well. If you have any more questions let me know. There's no "deadline" but I'm almost out of intakes for this group buy

[Pepperoni]

Thanks everyone, group buy is over. Keep an eye out in the advertiser's section for upcoming sales from us!

[exitspeed]

Group Buy is over. Thread closed per sellers request.