Altstadt Wheels (Huge Dish) 18X11J and 18X12J -7 O/S PCD 5 X 114.3

[CursedGTR]

Got these wheels from a guy here in Okinawa, now I am considering selling them in order to put the money towards the wheels I really want. They are 18 inch 11j Front 12j rear, -7 offset (5 lug 114.3 PCD). They need a little work in the middle and I will post up more detailed pictures if anyone shows interest. I am thinking 1100.00 Shipped for the set without tires to the Continental U.S. Price is negotiable within reason of course.

http://i35.photobucket.com/albums/d199/CursedGTR/post-2295-1185080625.jpg

http://i35.photobucket.com/albums/d199/CursedGTR/post-2295-1185080644.jpg

http://i35.photobucket.com/albums/d199/CursedGTR/post-2295-1185080667.jpg

[S13SilviaGirl]

I was going to lock this, but I see that you tried to fix it...soooo I will fix the title for ya.

[CursedGTR]

I was going to lock this, but I see that you tried to fix it...soooo I will fix the title for ya.

Thanks for the assist

[k's_silvia2.0]

Holy Lip!!!!
Those are some nice wheels Gluck.

[Okinawandrifter87]

Verrrry sexy wheels!!!!!!!!!!

[CursedGTR]

I measured the lip today. The Fronts are at about 10CM (Approximately 4 inches) and the Rears are at about 12CM (Approximately 4.5 Inches). I also took some pictures of the centers to better depict the areas that need some attention. When I bought this set of wheels I was going to strip the centers down and paint it to match my car, but again, I have decided that I would rather go a different route with my choice of wheels. Better pics are below.

Front Lip
http://i35.photobucket.com/albums/d199/CursedGTR/DSCF0345.jpg

Rear Lip
http://i35.photobucket.com/albums/d199/CursedGTR/DSCF0344.jpg

Cancer
http://i35.photobucket.com/albums/d199/CursedGTR/DSCF0337.jpg
http://i35.photobucket.com/albums/d199/CursedGTR/DSCF0338.jpg
http://i35.photobucket.com/albums/d199/CursedGTR/DSCF0340.jpg

The bolts will be put back in and properly torqued. I took them out in preparation for paint.
http://i35.photobucket.com/albums/d199/CursedGTR/DSCF0342.jpg

[ALEXTHESUS*PECT]

super nice wheels! i always wanted a set but these are too wide for me!

[CursedGTR]

Still have these for sale and just found a set of rims that I really want. I have been pretty flexible on price with those who have PM'd me, but no one has dished out the cash. Just to be up front on how I work, let me outline an example of a transaction with me.

I am new here and unknown to most as a seller my reputation is important to me and I am not here to rip anyone off (I am selling a high dollar item, and you are potentially spending a bit of your hard earned money) and I think a few people may be skeptical of me.

You PM me and we agree on a price.

I ask what payment method you will use.
I can do Bank Transfer or Paypal (paypal will let you use a credit card).
You decide.
I ask for shipping address.
You reply with address
I ship with tracking numbers (USPS Priority)
I send you the tracking Numbers same day the item is shipped
You send me cash within 24 hours (unless of course it is a weekend).

This way you know your rims are in the mail and I know the check is in the mail.

Because of how I like to do things, I only do this with people in the Continental United States. People in other Countries PM me as I have had great success sending things to Australia but I hate shipping to places like South America and Europe.

Thanks again for looking,
Brian

[silvia_twins]

Very Nice wheels GLWS

[CursedGTR]

New Price - 1100.00 Shipped OBO.

Wifey is not letting me buy the new wheels until these are gone.

[yokotas13]

ugh, i want these

[jspec240]

damn Ive never seen such a good price for rims of this quality. I cant believe theyre not gone yet. Ill find a buyer

[tattoo131313]

Are the faces polished aluminum or chrome?

[burgy240]

ugh, i want these

Dammit you have enough wheels that make me drool....

I just don't know how much it will take to make these fit the y33??? Sexy rims!

I can't really tell what is wrong with the middles ( other than the fact that something IS wrong with them) Could they just be polished out and cleaned??

[qt_240]

if your willing to sell a pair let me know..i through you an offer. i would really like to pick up the set.. but i just cant justify getting the 18x11 -7offset, to fit in the front without crazy modifications (ie. tub fenders).. I could be wrong though..

[CursedGTR]

if your willing to sell a pair let me know..i through you an offer. i would really like to pick up the set.. but i just cant justify getting the 18x11 -7offset, to fit in the front without crazy modifications (ie. tub fenders).. I could be wrong though..
30mm overfenders with some camber will work but will be tight. If I sold only a pair it would make it kind of difficult to get rid of the other two.

[CursedGTR]

Dammit you have enough wheels that make me drool....

I just don't know how much it will take to make these fit the y33??? Sexy rims!

I can't really tell what is wrong with the middles ( other than the fact that something IS wrong with them) Could they just be polished out and cleaned??

I outlined the problem above, it was corrosion from saltwater air. The centers are chromed so you would have to strip the chrome and then polish or paint. I had a quote of 300.00 to strip them and then paint them over here, So I would imagine you could do just as good or better int eh States.

[HellonFire]

I pm'd you. No reply?

Edit - You replied. :)

Tyler

[hitman]

someone buy these both as rears and a pair of vsss for the front. all polished. do it

[CursedGTR]

someone buy these both as rears and a pair of vsss for the front. all polished. do it

Yeah buy these fuckers so I can be freed from grasp of an overbearing little asian chick that is preventing the lords will (me getting the new wheels) from occuring over storage space and this quote "you already have wheels".

[yokotas13]

30mm overfenders with some camber will work but will be tight. If I sold only a pair it would make it kind of difficult to get rid of the other two.
hook me up on the 11js...

[Slidin240Wayz]

Hello,

Will they clear BBK in the front?

Carlos

[CursedGTR]

Hello,

Will they clear BBK in the front?

Carlos

I had 6 POT Fronts and 355mm rotors and everything measured out alright. I can take a measurement for you if needed.

[Slidin240Wayz]

I just want to make sure they clear as-is, without spacers.

Carlos

[CursedGTR]

I just want to make sure they clear as-is, without spacers.

Carlos

That would take me a while to check physically (I wasn't worried about needing spacers). My car is broken down to the Chasis and is being painted, it will be about 3 weeks before I get to reassemble the car in the best case scenario. I can check against GTR Brakes or something like that for you (not alot of guys running around with big brake kits right now). Or maybe someone on this site would know.

Brian

[S13Boosts]

super dish,super hot!:bigok:

[drftwerks]

i have a set of theese , and the rear pad is large, so it really should clear the bigger brakes

[bziggers13]

bad ass wheels at even badder price... are these 3pc or 2??
also.. tires included?
lmk what you can do to 71701 shipped..

[pr0ject TRUENO]

bad ass wheels at even badder price... are these 3pc or 2??
also.. tires included?
lmk what you can do to 71701 shipped..

The price listed is the price shipped.

I can't believe these wheels haven't sold yet...if you still have these when I get my tax return they're mine!


GLWS

[CursedGTR]

As of right now these wheels are NOT For Sale

They are going to get redone and will be posted back up for sale after they are finished. Although the price will be increased, there will be nothing wrong with them as all imperfections are going to be removed. The centers are going to be done in Black the dish will remain chrome. for those who have shown interest, they will be reposted in a few weeks.

Brian

[ALEXTHESUS*PECT]

As of right now these wheels are NOT For Sale

They are going to get redone and will be posted back up for sale after they are finished. Although the price will be increased, there will be nothing wrong with them as all imperfections are going to be removed. The centers are going to be done in Black the dish will remain chrome. for those who have shown interest, they will be reposted in a few weeks.

Brian

you should be able to get atleast 2k for them refinished!:kiss:

[pr0ject TRUENO]

woohoo

soooo mine

[f8ldzz]

I would've paid for them as-is.
Have cash in hand, or PayPal...
ANYTHING but black... :(
If you redid the centers in white, silver, or rechrome, I would still take them.
Black centers hide the details of the wheel face, and with the big lip, the detail in the wheel face gets hidden even more, IMO.
GLWS

[CursedGTR]

I would've paid for them as-is.
Have cash in hand, or PayPal...
ANYTHING but black... :(
If you redid the centers in white, silver, or rechrome, I would still take them.
Black centers hide the details of the wheel face, and with the big lip, the detail in the wheel face gets hidden even more, IMO.
GLWS

I might consider silver or like a light gunmetal.

[RotaryHog]

OMG those wheels are hott porno sex on a platter.

Good luck with the sell.

[SlideAlliance]

Sold, to me :bigok: