PDA

View Full Version : 1990 300ZX (z32) partout!


wolfe06
11-29-2007, 04:08 PM
The car is a Silver 2 seater, with cloth interior. NO LEATHER. And it has all black plastics.
The car was owned by an older gentleman who took very good car of the car, i bought it from him when he wrecked it in the rain. the car took front end damage so the subframe and a wheel, radiator, condensor, bumper was messed up.

the parts i have.. and i will get pics up if needed upon request.

EXTERIOR


-Doors with heated mirrors-no dings or dents(passenger side has broken window.
-T-Tops- no dings or dents
-Driver fender-no dings or dents
-Tailights
-Centerpanel (300ZX)

-Driverside headlight-perfect
-Turn signals- passengerside has small crack.

INTERIOR
-Steering column with metal 300zx key, valet 300zx key, and a spare key
-ENTIRE INTERIOR
-radio bezel
-trunk carpet
-passenger seat
-dashboard
-sun visors
-ceiling piece
-t-top shades
-t-top bags
-ecu
-ABS module
-all the trunk panels
-panels from behind the seats
-A-pillar covers
-rearview mirror
-climate control assembly with hazard switch
-Clock
-Headlight switch
-gauge cluster cover
-defrost vents
-center console
-shifter cover (not the boot, the part ashtray sits in)

MECHANICAL
-4rotors
-4calipers with good pads
-5lug hubs
-splashshields for rear discs
-knuckles
-rear axles
-differential
-rear knuckles
-rear lower control arms
-ebrake cables
-2piece automatic driveshaft
-front struts/shocks
-stock airbox
-rear swaybar
-rear struts/shocks
-rear upper control arms
-rear toe arms
-rear traction rods
-nonturbo motor with 109k miles.
-automatic transmission
-powersteering tank
-fuel filter
-cruisecontrol actuator
-fuel sending unit
-fuel pump.

IF anyone is intrested in anything the best way to reach me is through email, here on 3ZC, or my AIM :: twinturbo8803

everyone i have here is in nice condition, am more than willing to take pics if anyone needs anything. but before you ask for a picture, if you could take a look here...
http://s130.photobucket.com/albums/p261/Wolfezx/300zx%20parts%20forsale/ (http://s130.photobucket.com/albums/p261/Wolfezx/300zx%20parts%20forsale/)
if you need more detailed pictures, i can get them.

AllShowNoGo28
11-30-2007, 06:21 AM
How much for the rotors and calipers shipped to 03815

wolfe06
12-01-2007, 06:04 PM
How much for the rotors and calipers shipped to 03815

is that front rotors and calipers?
rear?
both? what? more detailed.




im trying to sell an entire brake/5lug package

brake setup (4rotors, 4pads, 4calipers, rearsplash shields, ebrake assemblys, ebrake cables, uprights.. everything needed for a swap.)---650$

wolfe06
12-02-2007, 06:26 PM
bump.

hood
hatch
nose panel
t-top shades GONE



if you need anything let me know fast, its going quick

Synicals13
12-03-2007, 12:05 AM
how much for the brake master cylinder

wolfe06
12-04-2007, 02:35 PM
how much for the brake master cylinder


BMC- 100 dollar bill

wolfe06
12-06-2007, 11:05 PM
bump, plenty of 240 upgrades still here.

Bushido
12-06-2007, 11:08 PM
can you beat 450 shipped for full brake/mastercyl/ebrake setup? i know its cheap, but I have another guy that will do 450 if you can't

wolfe06
12-07-2007, 08:37 PM
can you beat 450 shipped for full brake/mastercyl/ebrake setup? i know its cheap, but I have another guy that will do 450 if you can't

i could if i had the shitty brakes.

these are 30mm alum.

450 is too cheap sorry :( good deal for you tho!

ZooMxxl
12-07-2007, 08:55 PM
if your gonna part out the brake package, im interested in the ebrake assembly and cables.

RB26Sileighty
12-08-2007, 12:07 AM
how much for the ignitor chip?? ship to 75709

4bangers
12-09-2007, 03:53 AM
can I have the master cylinder? pm me please

wolfe06
12-30-2007, 10:09 PM
bummppp!! still have lots of parts..

MAF gone.

rancid240
12-30-2007, 10:10 PM
i could if i had the shitty brakes.

these are 30mm alum.

450 is too cheap sorry :( good deal for you tho!

If its a NA 90 then they should be 26mm

wolfe06
01-06-2008, 08:23 PM
If its a NA 90 then they should be 26mm


how sure are you? i talked with 3 people becaause i was unsure myself, they told me that they were 30mm



bump still have lots of gear

miggypq21
01-06-2008, 09:37 PM
How much for the brake setup shipped to 78840?

DALAZ_68
01-06-2008, 11:38 PM
how much for all four calipers no pads :wtf: pics?

andmattsayd
01-07-2008, 03:05 PM
how much for the 5lug hubs??
shipped to 91730??
lmk!!

rancid240
01-07-2008, 04:38 PM
how sure are you? i talked with 3 people becaause i was unsure myself, they told me that they were 30mm



bump still have lots of gear


The "26mm Aluminum" calipers were used ONLY on 1990 non-turbos. They used a 280mm x 26mm rotor.

From:

http://www.importnut.net/300zxbrakeswap.htm

ak_slick
01-07-2008, 05:00 PM
If you still have the seats someone should buy them off you so they can make cool seats like mine.
http://i25.photobucket.com/albums/c53/AK_Slick/rb20det/P1010017.jpg

shawley
03-19-2009, 07:44 PM
Do you still have the trunk plastics---how much?

shawley
03-19-2009, 07:51 PM
The link to your pictures is not working
Is there another way to see them?

schoolzin
03-19-2009, 11:10 PM
Please PM me if you still have the BMC.

Thanks mucho!

racerx2k1
03-20-2009, 08:24 AM
2 year old thread

and

Last Activity: 10-26-2008 02:47 AM.