systems built in there 240? PICTURES?

[drifterx]

right now i am holding 2 12" subs and a 1 farad cap.
i ahve a S13 hatch and i want to build a decent system
give me some ideas
right now i am thinking of building a platform in the back with the 2 subs facing straight up... then building the platform for my amp, cap, and the power distrubutor blocks between my subs and my tower bar
but i also want it so i can take it out easily so i think i will have 2 sides that sides in and all the wires be glued under the board and all i have to do is disattach the ground, power, and RCA and the whole system comes right out on track days

[gh6o6]

mount the amp on the back of of one of the seats, this way all you have to do is disconnect the speaker wire to the subs, and lift the box out

if you thing about it, an amp weight about 5 pounds.  It isnt going to make that much of a difference.  The box on the other hand is about 50 - do what you will, but i leave my amp in

[AceInHole]

my amp is bolted to my box right now... so all I do is unplug the RCA and power wires (just need quick connectors) and the whole sub-system is out in a minute.

[HaLo]

that is what i did:
http://community.webshots.com/storage/1/v1/9/81/80/48798180HABLcT_ph.jpg
http://community.webshots.com/storage/1/v1/9/81/93/48798193WRlfww_ph.jpg

[drifterx]

</span><table border="0" align="center" width="95%" cellpadding="3" cellspacing="1"><tr><td>Quote (HaLo @ Sep. 25 2002,3:22)</td></tr><tr><td id="QUOTE">that is what i did:
http://community.webshots.com/storage/1/v1/9/81/80/48798180HABLcT_ph.jpg
http://community.webshots.com/storage/1/v1/9/81/93/48798193WRlfww_ph.jpg</td></tr></table><span id='postcolor'>
cant see the pics
also i have my amp for my speakers mounted on the seat already

[stil bil]

check out my picture site in my sig!!

[aqwkmf]

is this what you want to do?
http://forums.northwestnissans.com/attachment.php?s=&postid=24110

im selling the platform if you want it...the holes are for 10"...those speakers are photoshoped in. i never finsihed it. im saving for a FD

[drifterx]

actually i want the subs to be lower and near the trunk side......
i want to keep it so if i want to put the board there to hide the system i can

[Nerfdude]

i didn'tbother making my setup easily removable, as you'll quickly find that hauling a huge sub box out of your trunk is an impractical waste of time. i've got two 12" alpines and a 1000w kenwood amp on a 2 cu. foot box, and it sounds great. the amp is bolted to the back of the box, and i lay my back seat down so it can be seen... looks pretty cool. but don't waste effort making it easily removable, just buy a box that fits (or build a box). my box fits right under the trunk cover with 1/4" of space between the cover and box top...

oh, not to mention if you don't BOLT DOWN your box, it's going to slide around and rip up your carpet (like mine did). so in order to remove it, you'd have to unbolt it and haul it's heavy ass out... just bolt it down and cover it, people won't know it's there when it's just sitting in the lot. buy an alarm.

[aqwkmf]

yea...mine wansnt meant to be removeable when its done. but it could be.....im going to use non removeable screws when the subs go into it.