PDA

View Full Version : testing waters...95 240sx v8


silvia302
11-06-2007, 12:09 PM
240sx s14 se
fully loaded
all new fluids/ royal purple synthetic
5spd
stitch welded
j30 weld lokd diff
custom driveshaft brand new
t5 rebuilt transmission
spec stage 2 clutch
custom short throw shifter
custom tranny mount, mid body support brace
t/a 275/50/r17 rear new shoes
set of s14 sylvia rims with new shoes on front 2 back 2 worn
apexi 3 inch custom exhaust
mac equal length headers custom also
new gaskets
new harmonic balancer
new belts
no a/c(just dummy)
msd cap/rotor
msd 10mm wires
300zx big brake upgrade
5 lug conversion
new brake lines
drilled and slotted brembo rotors
custom p/s lines
custom fuel lines
custom clutch cable
custom clutch setup(originally automatic)
momo pedals(viper style)
push button start
custom center council
custom shift boot.
jbl internal speakers
phoenix gold amp 4 channel 1200watts
alpine mono amp digital
infinity subwoofer
jecs 255lph fuel pump
new fuel filter/oil filter
new sock
mini hart steering wheel
6k hid headlights xenon fabbed
mugen 4 point harness
clear corners with extra hid bulbs
silvia badge on front from japan
custom lt1 motor mounts
new battery
jdm lip
custom throttle cable
newer shocks and springs
302 bored to a 306
head work
2k on motor
100k+ on body
350+ hp
400 fpt
touchy throttle


will have pics up in one week, im gonna have it painted a ustom deep purple in 2 weeks and then it will be ready to sell unless someone wants it the flip flop green i t is now i will sell it sooner. i am asking 11k w/paint 9800.00 w/o paint. please ask if interested agin i am testing the waters for this car i need it sold once completed with paint and tuned perfectly. i want it to go to a good home. pm me if interested.




pics..
motor
http://i122.photobucket.com/albums/o246/nicsportfolio/nissan50003-1.jpg
5lug and big brake 300zx upgrade with brembo d/s rotors
http://i122.photobucket.com/albums/o246/nicsportfolio/nissan50025.jpg
interior
http://i122.photobucket.com/albums/o246/nicsportfolio/nissan50020.jpg
http://i122.photobucket.com/albums/o246/nicsportfolio/nissan50006.jpg
front end with eyebrows and hid 6k with jdm lip
http://i122.photobucket.com/albums/o246/nicsportfolio/nissan50005.jpg
rear end flashin the 5.0 with shaved emblems
http://i122.photobucket.com/albums/o246/nicsportfolio/nissan50002.jpg
http://i122.photobucket.com/albums/o246/nicsportfolio/nissan50009.jpg
http://i122.photobucket.com/albums/o246/nicsportfolio/nissan50003.jpg

silvia302
11-06-2007, 02:02 PM
bump^^ anyone? :aw:no ones interested?

topsecretgold
11-06-2007, 02:18 PM
sounds sweet. i want to do an ls1 v8 in mine

11-06-2007, 02:19 PM
u gotta post pics or no1 will be intrested =/

jackjack
11-06-2007, 02:33 PM
pics..................

silvia302
11-06-2007, 02:36 PM
i will post pics as soon as i get it back from the paint shop..
i forgot about the fact that the car has only been driven to be uned.. NEVER BEATEN ON! NEVER DRIVEN HARD! just built so i can make some money to move for a job and to live my dream in a diferent area. nyc.

silvia302
11-07-2007, 01:51 AM
bumpity bump^^^:ughd:i will post some pics hopefully today. like i said it is not painted yet though.

mr2man07
11-07-2007, 10:06 PM
what kind of motor does it have? ls1?

never mentioned it.

anyway, bump for you and pics!

LimitedEdition
11-07-2007, 10:07 PM
It says 302 bored to a 306.

MURPHY
11-07-2007, 10:10 PM
302 bored to a 306

hmmm i have a 302 and a shell... lol

good luck with the sale

silvia302
11-09-2007, 06:23 AM
not gonna lie its a hard swap. not too many people do it because of all different reasons. i did it to be different and to create a torque monster for some lucky ass buyer. if u wanna be a true rider out in the drift world it sometimes helps to stand out and well have skill lol but i dunno i guess this is what people want lately a v8 swapped nissin. so thats what i built so i could sell it hopefuly quick and be able to move and live. im sorry bout pics they will be up as soon as its done.

avs0730
11-09-2007, 06:38 PM
any pic where in ny are you located

silvia302
11-13-2007, 02:02 PM
im in buffalo ny. im sorry pics havent been posted yet.. im waiting on the body guy to call me to tell me the paint job is done ughhhhhhhhhh! i have pics ill post of it in primer if anyone is interested.

silvia302
11-13-2007, 02:25 PM
just put in thread to updated pics of the car in primer before paint...and some motor shots..asking price is now 9500.00 with paint..obo

silvia302
11-13-2007, 02:27 PM
need it gonnnne i gotta move!!!!!! comon people drift car, crazy torque monster, weld locked diff, one of a kind v8, true rider. never been beaten on once! not even really driven built for a lucky person to have some good times in! jump o this shoot me some pms with offers! bump^^

silvia302
11-14-2007, 07:31 AM
offers anyone!!?? i need to sell...

rps13 SR
11-14-2007, 01:06 PM
built it to make money.. you should have never done that. probably gonna take a while to find that right buyer

silvia302
11-14-2007, 05:26 PM
thats just your opinion. obv you dont drift or u would no the true reason i did this. the potential of a rear wheel drive v8 torque monster is amazing. this is for real riders. anyone interested...bumpity bump^^

whitefro
11-14-2007, 06:23 PM
messy but dope, glws.

ranger240
11-14-2007, 06:30 PM
damnit too bad im only a fake rider otherwise id be all about this car

silvia302
11-15-2007, 10:59 AM
ok guys im on here to sell the car not start a debate.. you understand why i built the car. its a torque inspired drift car. thats it.. its being painted and if im not gonna get any positive feedback then i will just take it off of here and throw it on ebay. i just thought the silvia community deserves first dibs on this 1 of a kind drift car.. so if anyone is truly interested or has anything nice to say please write back.thanks

rps13 SR
11-17-2007, 02:49 PM
you supposed to build a car you like to drive, any modded car here sells for lots lets than is out in. Its basically impossible to buy a 240sx shell put some money into it and sell for profit. every 240 owner takes a hit when they sell

HKSdrift3r
11-17-2007, 07:14 PM
. every 240 owner takes a hit when they sell


except me :boink:


Nice swap, but id say clean up the engine bay!

good luck with the sale,
George

silvia302
11-17-2007, 09:03 PM
im in the process of cleaning it up now.. relooming it, new wires, msd cover, intake, the exhaust is not perfect yet but its being done too. and then im selling it..honestly id take 8.5k for it cash but id like to think id get more. thats about as low as ill go. painted and all. i think thats a steal. no rust, upgraded custom everything, new motor, new exhaust, new belts, new batt, new driveshaft, tires..etc..its practically new in an older style kinda way lol...

HKSdrift3r
11-18-2007, 12:57 AM
so no trades for sure??

silvia302
11-18-2007, 11:10 PM
i really dont wanna trade.. if u sel your car anytime soon leme know well work something out.. i just need cash right now for moving.. i love my nissan...and well urs is sick too man.. i just have to get my life in tact and follow the job and were the moneys at so i can buy another car again soon..lemmeknow

nothingfancy
11-19-2007, 03:22 PM
thats the exact same swap i am goin to start to my s13 silvia in a couple weeks. sorry to interuprt yur for sale thread. couple questions. do u have any motor install pics? or a write up on how to swap this in. ive searched the whole web and couldnt find nothing but ls1 installs. 302 drivetrains are 10x cheaper. if u dont mind can u send me some info on the wire up,and install part of this project? my email is [email protected]

silvia302
11-20-2007, 08:15 AM
honestly man it wa sreally hard. thats why i am asking 8500.00 the swap is alot of labor. alot alot alot of customization and fabrication. the wiring is not too bad but honestly its also alot of time and figuring out. i cant remmebr the exact wiring. its not too many wires. the motor mounts you can get from transdap on summitracing.com and with some modifcation it will work. the throttle cable,ps lines,clutch,tranny spout were the shifter comes through, driveshaft, fuel lines are going to be your issue and there not fun! the car has an EXTREMELY TOUCHY THROTTLE. very torquey. great for drifting. all i can suggest is to go to a local dealer and get every wiring diagram you can. get a chiltons and go to town. i did a push button start,race style with a hidden turn key unerneath the dash to cut off ignition. i dunno man.. goodluck and hope it works out great. lemme know if your interested in mine..:)

silvia302
11-21-2007, 05:29 AM
i guess ebay it is.... im surprised i thought foir sure someone would jump on this on here.. next week ebay. any offers send em to me asap or well happy bidding...ciao

silvia302
11-23-2007, 07:17 AM
cleaned up the engine bay..reloomed everything..screened throttle body..new belts on, waiting for it to be painted ughhh! and its snowing here..which means as soon as its done. garage till its sold.

decided on viper grey..with rims powder coated black...did center council over....new shifter....so much new stuff..so sad its gotta go...

yokotas13
11-23-2007, 07:27 AM
id offer 6 for it, its not really worth much more...

silvia302
11-23-2007, 05:48 PM
id do 6500.00 if its legit...theres alot of time put into this car. and it def shows...ill send you pix if interested. lemme know if ur just makin realistic offers or if your really interested and i will make sure the paint is done asap.. its planned to be finished next week.. lemme know mani really wanna move and get things rolling and this is the only thing holding me back. pm me ill pm you with my number..

HKSdrift3r
11-23-2007, 08:42 PM
most the new pics when its all done bud!

silvia302
11-28-2007, 07:27 PM
pics are going to be up this week.. but im assuming its going on ebay due to people bashing, saying they like it and want it when they live in another country, and other bs buyers. so i will post the link... i want 7500.00 and thats it. no bargaining. theres way more then that into it and the car is practicaly new and perfectly sound in every way. every measure was taken to make this perfect and no corners were taken. so if any one is interested i will talk to them through pm. thanks

silvia302
12-01-2007, 08:40 AM
ebay it is...

nothingfancy
05-28-2008, 07:46 PM
do u still got this car?

arsvtcobra
05-28-2008, 08:19 PM
Do you have the dyno sheet that shows 300+hp and 400tq. There is no way you got that with the mods you had listed. Not even with NAWS!

hassanbakar123
05-30-2008, 01:44 AM
noticed it didn't have a fan in the picture
is there electric fans on it now?

TEALSQUEAL
05-30-2008, 03:09 AM
actually yes with nitrous he could easily get those #'s out of it, but yes with the stock intake manifold, tb, all that jazz he isn't making over 275whp even on a great day. And if you have the stock heads you will only flow enough with a complete hogged out E7's and an F cam making around 300whp if you port matched the intake put a larger throttle body on it, converted the computer to a fox body unit, and put in 24lbs. injectors and a AFPR... not that I know anything about mustangs... not to mention you still have the egr valve on it... why? I don't mean to whore your thread but you are falsely advertising... Not many people know about danger stuff on this site so I would rather shed a little light on it

arsvtcobra
05-31-2008, 06:43 PM
actually yes with nitrous he could easily get those #'s out of it, but yes with the stock intake manifold, tb, all that jazz he isn't making over 275whp even on a great day. And if you have the stock heads you will only flow enough with a complete hogged out E7's and an F cam making around 300whp if you port matched the intake put a larger throttle body on it, converted the computer to a fox body unit, and put in 24lbs. injectors and a AFPR... not that I know anything about mustangs... not to mention you still have the egr valve on it... why? I don't mean to whore your thread but you are falsely advertising... Not many people know about danger stuff on this site so I would rather shed a little light on it


Yes with nitrous ALMOST anybody could easily make those numbers. But it would be more nitrous than the motor could handle. Thats why i stated "with the mods you have listed". There isnt nitrous listed in his original post. And he isnt even making close to 275whp. Maybe at the crank. My cobra with full bolt-ons,65mm tb, and ported&polished heads only made 271whp. And thats with a modular motor. A pushrod 302 is gutless. I have seen, on numerous occassions, them make under 250whp with moderate mods. But with heads,intake,cam, etc they will have what he is claiming plus some.

nothingfancy
11-09-2008, 09:42 PM
i know its a old thread. but do u still have this car for sale

fliprayzin240sx
11-10-2008, 05:57 AM
i know its a old thread. but do u still have this car for sale

Damn, lets bump a thread that originally came up a year ago shall we?!?! Why dont you freaking PM him instead of raising this shit fromt he dead. :rant2:

cc4usmc
11-10-2008, 06:09 AM
Haha bumped from the dead TWICE! What a retard.

racerx2k1
11-10-2008, 07:26 AM
1 yr old thread.