Need help with s14 swap

[BrandonS13]

I've searched pages and pages of info
could anyone supply me with a link to a 1995 KA motor into S13 info?

as in do i need a s14 harness to do this ??/

thanks in advance guys

[Z U L8R]

no. you can swap intake manifolds with your s13 if your s13 was a dual overhead ka (ka24de)

if your s13 didn't have a dohc and you don't have an s14 wiring harness, then what DO you have?? lol and then i'll tell you what to do :)

Dave

[BrandonS13]

i bought a fixer upper to flip..
it came with the 95 motor, and a BUTCHED harness like a serious JOKE
half the sensors arent connected etc..

is there at least ONE specific thing i can tell on this KADE to assure it is even a 95+ cuz if it isnt then i obviously wont have this problem...

thanks

[Z U L8R]

hrm.....it's been a while since i did a ka..... i believe the coolant temp sensor will have a plug on it that you squeeze to disconnect if it is an s14. if it's an s13 DE then it should have the ole school slide on joint with the paper clip guy that you always lose and never put back on it hahaha

[BrandonS13]

im going to run out to the garage and chekc it out..
does anyone else have any destinctive facts to know the year of the motor?

regardless could i possibly get a link to the info needed to do this swap;
s14 ka into s13a chassis? thanks

[BrandonS13]

ok it is a s14 engine i noticed the dizzy has 2 plugs vs. 1 on s13 engine
as well as the coolant temp sensor doesnt have the clip and is not on the neck to the rad outlet hose.

please help with info for this swap thanks alot :)

[JRwerks]

If its a 95+then itll have 2bolts ontop of the valve cover and if its a 91-94 i believe then it'll have 3bolts on top of the valve cover so thats how u can tell if its a s14 or s13 motor and all u need is a s13 harness,s13ecu,s13intake manifold... unless u got the s14 harness and everything wired up for the s13 i have a 96'ka24de witih 91intake manifold,91ecu,and 91 harness works great...

[projectRDM]

The 95 will have the same CTS, TPS, and O2 as an S13 DOHC. Only 96+ KAs use different sensors.

Use a 91-94 harness and ECU.

And search, we've discussed this to death a million times.

[Z U L8R]

use your s13's intake manifold and be done with it.