SR20DE tranny info

[yankee_TOP-END]

I just bought a S14 97 and im planning to make it a SR20DE swap but I want it with automatic, what tranny can I use ???? hope U can let me know my options!!

tnks!!!

[drifting.8]

Let me get this straight u want to swap in a N/A sr and u want it autotragic.........
ok?
why?

[MomentumGT]

In manual applications you can use the ka tranny so you could possibly use a ka auto tranny and swap the bell housing and it could possibly hook up. You might run into some problems with the ecu situation. Not overly confident with my advise but normaly people do this swap the other way around going to a manual set up.

-Jon

[yankee_TOP-END]

tnks!!!

how can I get the best performance on my aut tranny???

well actually Im after the SR20DET but I want it aut for drag and make the same time always i don't wanna to brake my time or do less U know ,plus the reaction is better .or how expensive is a secuencial tranny??

[azndoc]

How expensive are sequential trannies.

I know HKS is
6 speed $10,455.00
5 speed $9,170.00

Holinger I think is $20,000

Greddy I think is around the same range as HKS

[johngriff]

Let me put it down.

Ka Gearbox is the same as the Sr, but not the bellhousing, they are interchangeable in the manual application.

In the auto, the same is true, but you cannot use a manual SR bellhousing to an auto KA box. In short, You will need to find an auto sr motor set, then dump it in, just like the KA was.

Wiring and everything else will be the same as a standard ka-sr motorswap, given you use the AUTO sr power harness, to tie up the trans.

[yankee_TOP-END]

Thanks a lot for the tips!! , but can I use the bellhousing of a sentra se-r or a G20 , or it has to be from a SR20 RWD , is there any place where I can found the full package? the engine,harness,ECU,aut/tranny,etc????

Im really greatfull for all the help! , sorry for all the questions but im just starting in the world of the Nissan's 240's!! I used to have a 3000GT but the S14 is much fun plus it's an icon

[johngriff]

must be rwd sr20