kouki projector adjustment

[ChingSR20]

I just put hids on my 97 kouki 240 and the projectors are aiming down. I was wondering if anyone can show me where the adjustment screws are, my cheltons book it only shows for the zenki... thanks alot

[Sir]

on the headlight there are 2 philips screws that you turn to aim
one is left/right
second is up/down

[devonkyle77]

are you sure they arent 8 or 10mm hex screws?

[tukn9s]

Look down on the lights, there is a adjustor knob on the lights, use like an 8mm wrench, that for up and down.

[lucky7]

i think you're both right. 1 is 8mm, and the other is 10mm. its been a couple months since ive messed with mine though.

[chuy]

also you can fine tune it by using the clear knobs

[ChingSR20]

thanks alot guys i'll try it when i get off from work.

[ChingSR20]

thanks alot they were both a 8

[tukn9s]

Glad I could help.