clovers
10-07-2007, 01:37 PM
i've been running a s13 sohc maf and baught a z32 one a little while ago. when i first put it on i left the rotary switches where the stock sr20det setting said to have them, i think it was 402 or something like that, when i put the z32 maf on there the input voltage was something like 3.25 and output the same, so i leened it out all the way, -70 and still ended up with something like 2.25, even with my sohc maf i've been running it at like -.50 and it still runs rich and back fires.... the fsm for the s14 sr says the maf should read .850 to 1.25v at idle.
so.
does anyone have a z32 maf and an emanage?
if so, what is your set up?
last i read was to have it at 2-0-7 and the maf set to hw-2 through the software but it really didnt help at all
i've been thinking i might have bigger injectors and that could be why all i ever do is run rich..
so.
does anyone have a z32 maf and an emanage?
if so, what is your set up?
last i read was to have it at 2-0-7 and the maf set to hw-2 through the software but it really didnt help at all
i've been thinking i might have bigger injectors and that could be why all i ever do is run rich..