View Full Version : 1/8 mile & 1/4 mile Track times!!
rb25drag
10-04-2007, 02:52 PM
I would like to hear some numbers you guys are running at the track. Include 60' 1/8 mile and 1/4 mile or which ever you run. Also would like to know what car/ engine your running and Hp at the wheels. Just give basics not too much details.
TonKpilS14
10-04-2007, 03:16 PM
1/4 mile:
Time: 0.02 sec
HP: 9,000
Motor: Jet Engine
Automobile: Scooter
240sxrb25
10-04-2007, 03:18 PM
wow, thats fast
rb25drag
10-04-2007, 03:24 PM
1/4 mile:
Time: 0.02 sec
HP: 9,000
Motor: Jet Engine
Automobile: Scooter
WOW how did you ever hold on??? Must have used JB-Weld!!!!!!!!!! Good stuff
PRADOgy
10-04-2007, 03:27 PM
1/4 mile:
Time: 0.02 sec
HP: 9,000
Motor: Jet Engine
Automobile: Scooter
ROFL!!!!!:bowrofl: :bowrofl:
Its all seriouse
steve shadows
10-04-2007, 03:32 PM
I ran 11s on a stock sr20det swap + a 62-1/t3 and tuned rom from a clip for the wrong turbo.
...in 2003.
smelly240
10-04-2007, 06:02 PM
I ran a 14.9 in the 1/8th with my nikes! Its gotta be da shoes!
bamaboy
10-04-2007, 07:00 PM
1/4 mile:
Time: 6 days
HP: .2
Motor: slot car engine
Automobile: Norfolk Southern Freight Train
sitting on dubs, tucking mad chrome, fo 18s in da trunk, candy drippin like ice on the sidewalk yo!!
__________________
2bad240
10-04-2007, 07:33 PM
sr20det
fmic
fuel pump
t25 @ 15psi (
[email protected] 15psi)
light ass s13
launching at 5k
vlsd
1/4-12.51 @ 111mph
1/8-7.93 @ 89mph
60" 1.68
rb25drag
10-04-2007, 08:06 PM
sr20det
fmic
fuel pump
t25 @ 15psi
light ass s13
launching at 5k
vlsd
1/4-12.51 @ 111mph
1/8-7.93 @ 89mph
60" 1.68
Nice 60' and 1/8 mile. Looks like your loosing a little on top end. But you got the first half down pat.
smelly240
10-04-2007, 08:19 PM
he has a t25 (doesnt have top end)
mayco_86
10-04-2007, 08:24 PM
Damn my best time with an s13 was a 13.4 at 108mph. But a 12.5 is really good. All stock just boosting 15-16 psi.
harangatang
10-04-2007, 08:29 PM
sr20det
fmic
fuel pump
t25 @ 15psi
light ass s13
launching at 5k
vlsd
1/4-12.51 @ 111mph
1/8-7.93 @ 89mph
60" 1.68
holy shit.. i didnt think a mid 12 with a t25 was possible.. :) now im a little more happy!!
nissandr1ft
10-05-2007, 12:03 AM
Old car- Ka w/ Exhaust
60ft: 2.34 (Horribly Prepped track)
1/8: 10.1 @70
1/4: 15.7 @87
New Car-
I/H/E.
60ft: 2.43 (Same Track but much worse tires)
1/8:
[email protected]
rb25drag
10-06-2007, 10:30 AM
Well since my 240 is broke I took my AWD talon to the track last night to play
Only launching at 2500rpm's didnt wanna tear the tranny out.
60': 2.52
1/8: 9.90
@ 76.8MPH
15lbs boost. Fully stock!!!!!
rb25drag
10-09-2007, 02:34 PM
So no one else here runs on the track?
steve shadows
10-09-2007, 03:44 PM
So no one else here runs on the track?
nope
everyone is a driftaaaaaaaaaaaaar or a fan boy
or just a normal person who likes 240s
I like drag, but personally I can't afford to build a competitive drag car right now.
its futile with the competition
my car should be 10 second capable on high boost
I hate you though so I wont help you
:bow:
TonKpilS14
10-09-2007, 03:59 PM
ya i have never taken my car 2 the drag strip...
if i did what kind of time u think i would pull off?
s14 sr20det
Greddy T51 Turbo
all the bolt ons... (about 420whp)
I have good grip in the back though.. my tires are 275's
rb25drag
10-09-2007, 06:23 PM
ya i have never taken my car 2 the drag strip...
if i did what kind of time u think i would pull off?
s14 sr20det
Greddy T51 Turbo
all the bolt ons... (about 420whp)
I have good grip in the back though.. my tires are 275's
If your running street tires you will prob still spin.
I would say a 1.7-1.9 60'foot
7.20-7.90 1/8 mile
10.90-11.50 1/4 mile
Just going off you WHP.
2bad240
10-09-2007, 06:34 PM
i think i got my clutch fixed so i will run my car for the first time with the new turbo this week.
((sr)) kelly
10-09-2007, 06:49 PM
12.4
untuned before cams on street tires...
hoping to hit 11s after a tune and 740cc injectors
s13
redtop w/t25
7psi
open diff
60'-2.5
1/8-9.23
mph-86
LowNismo17
10-09-2007, 07:43 PM
only launching your talon at 2500? i used to launch mine at 5500-6000 rpms.
S14 w/ SR20det
18 psi and pump gas on 35R
60ft: 1.7990
1/8th: 7.32
mph: 92
DrifterProdigy85
10-09-2007, 08:21 PM
SR20 w/ 2871R .86 - 353whp
2.4 60ft
12.9 @ 117mph 1/4....195/60-15 Delta Junk Tires
Spun clear across the 1/8. Cant remember ET but trap was 90mph at the 1/8.
TheTimanator
10-09-2007, 08:32 PM
s13
redtop w/t25
7psi
open diff
60'-2.5
1/8-9.23
mph-86
thats weird. Your 60' sucks more than mine yet mph is high than even when I was running a 9.2 in the 1/8th.
redtop sr w/t25
14psi
fmic
vlsd
full 3" exhaust
R/T... .069
60'.... 2.209
330.. 5.997
1/8...
[email protected]
1000' 11.708
1/4...
[email protected]
although my recent times have been worse :(
rb25drag
10-10-2007, 05:03 AM
only launching your talon at 2500? i used to launch mine at 5500-6000 rpms.
S14 w/ SR20det
18 psi and pump gas on 35R
60ft: 1.7990
1/8th: 7.32
mph: 92
Me and my buddy have broke about 6 trannys on the talon launching at 5-6000. 1st n 2nd gear keep breaking the teeth off. Thats why I dint launch it. It sucks at the track too. Couldnt cut a light for nothing. Ill stick with my 240 at the track.
Nice times on the SR. Best 1/8 mile E:T I have seen on that motor.
ChingSR20
10-10-2007, 05:16 AM
ka24de
intake filter stock pipieng
obx headers
apex'i N1 3"
b&m short shifter
1/4-15.00
SILVIA_KIDs14.5
10-10-2007, 06:09 AM
s14 with a s14 sr20det blacktop 1/4 14 flat spinnin through 1st with the base model supension setup with tikico D-spec struts and a blown tranny and motor mounts and stock clutch bossting at a bar. not to bad for a shake down if i don't say so my self
SiI40sx
11-30-2007, 05:10 PM
<< 1/8: 10.062 @ 70.42
<< 60ft. 2.329
stupid stock ass kade, dirty ass filter in stock full intake, full old ass exhaust with cats, open diff, and whatever tires.
jspaeth
12-01-2007, 02:15 PM
Just went to track today for the first time with my swap!
I just recently learned how to launch, so I was really looking forward to seeing my 60' times.
Here are my best 2 runs:
60': 1.926s 1.941s
1/4: 13.538s 13.556s
MPH: 100.83s 100.93s
http://makingapril.com/greg/justin/Time1.JPG
http://makingapril.com/greg/justin/Time2.JPG
Stock SR20det, blacktop, J4 ECU
UNTUNED, running 0.9 bar (~13.5 psi) on APEX'i AVC-R
Greddy RSPL FMIC
Greddy RS BOV
Stock everything else
Also, Kumho MX 245/40/17 word
I am really pleased with my 60' times, since previously, with the KA, when I didn't know how to launch, I had like 2.6s 60' hahahaha
QUESTION: Since my 60' times are pretty good, and based off of my trap speeds, does it seem like I am limited by power?....this is my instinct, because I have seen way better 1/4 mile times and higher trap speeds with way worse launches. Maybe if I get tuned that will help....I was winding out 1st to redline, 2nd to 7000, 3rd to about 6800, then 4th
((sr)) kelly
12-01-2007, 03:03 PM
8.0 1/8th, safeeeeeeeeeeeee tune, before cams
jspaeth
12-01-2007, 03:06 PM
^ what does that mean?
NEVERMIND
motorsnail
12-01-2007, 03:13 PM
^ what does that mean?
It means hes ghost riden the whip?
14.8
spinning tires 1st and 2nd really bad, Car is stock sr with a stage 2 act clutch.
Edit: Was 1/4 mile sorry im stupid slap me at will.
sr20boostn20
12-01-2007, 03:36 PM
im doin 11.4s
with 1.5 60fts
@123mph
little bit more than 1/2 throttle after 1st gear
realslow
12-01-2007, 05:13 PM
8.0 1/8th, safeeeeeeeeeeeee tune, before cams
this is nick driving his car or you driving nicks car
RedtopTech
12-01-2007, 05:35 PM
90' S13 coupe: BFG drag radials, S14 VLSD, Redtop w/ T25, SMIC, 3" turbo back with cat delete, MBC @ 14 psi, Energy suspension Master kit, Tein springs on KYB's.
60ft 1.85
1/8th 8.5 @ 84
On 75 shot
60ft 1.7
1/8th 7.76 @89
For list of 240sx drag times go to www.drag240sx.com (http://www.drag240sx.com)
BlackZenkiS14
12-01-2007, 05:52 PM
[email protected]
1.9 60'
Redtop SR. Stock turbo, stock sidemount IC, stock injectors, stock ecu with no tune, 17psi. 16" all season tires w/ j30 diff.
jspaeth
12-01-2007, 06:08 PM
[email protected]
1.9 60'
Redtop SR. Stock turbo, stock sidemount IC, stock injectors, stock ecu with no tune, 17psi. 16" all season tires w/ j30 diff.
holy balls 17 psi on a T25?
Nismoknightska-t
12-01-2007, 06:58 PM
last night in the 8th.. on street tires..
ka-t @ .8 bar (low boost)
8.6 @ 86mph
2.2 60 footer..
BlackZenkiS14
12-01-2007, 10:13 PM
holy balls 17 psi on a T25?
I know, i get that alot, and i do understand the problems, and stupidity of doing it.
But it held 17+lbs for a while when my MBC took a shit on me. Lasted me over 3 years like that. Now has roughly 90 thousand miles. and the last 40k have been HARD miles.
Finally blew on me a few weekends ago. It still makes boost, but it just makes a horrendous noise now.
jspaeth
12-02-2007, 07:48 AM
The other thing, is that since you were running an MBC, was that 17 psi peak, or 17 psi hold....
Before when I had my MBC, I tried to get it to stay at 14 psi....of course, the result was that it initially overshot to about 17 psi...
I quickly bought an AVC-R....thing is amazing....it holds my exact boost that I want within like 0.03 bar everytime
So yeah, if you are just briefly hitting 17 psi, that's not terrible I guess, as long as it settles back down to <15 psi.
Who knows
BlackZenkiS14
12-02-2007, 08:06 AM
The other thing, is that since you were running an MBC, was that 17 psi peak, or 17 psi hold....
Before when I had my MBC, I tried to get it to stay at 14 psi....of course, the result was that it initially overshot to about 17 psi...
I quickly bought an AVC-R....thing is amazing....it holds my exact boost that I want within like 0.03 bar everytime
So yeah, if you are just briefly hitting 17 psi, that's not terrible I guess, as long as it settles back down to <15 psi.
Who knows
Nah it'd spike really really high haha for a brief second, and end up sticking around 15-17 for a second before the boost tapers off at 5500rpm like the t25's do.
Its blown now, but thats ok, cause i got more time out of it than i should have. I have a Pulsar GTiR im throwing in there in a few weeks. :D
DrifterProdigy85
12-02-2007, 08:07 AM
Thought thats what would happen.
KA-T_240
12-02-2007, 09:08 AM
[email protected]
2.23 60FT
This was on my auto-x setup(coilovers RT615 which SUCK on the drag strip) and not being able to run in the groove.
KA-T
[email protected] stock IM and Head. Will have 26x10 slicks next season, as well as some other goodies
Hooorahh!
12-02-2007, 09:49 AM
last time i ran was
@ 1.1bar
stock motor
2871r
street tires
2.2 60ft
13.2 @ like 113mph around there i think the speed was
pump gas
BillWatcher
11-02-2008, 06:18 PM
stock s14 sr in a 89coupe, 8psi T28 normal traction issues
60' 2.167
1/8 9.131 78mph
1/4 14.178 97mph
Spoolpigeon
11-02-2008, 07:29 PM
89 coupe
redtop sr
t25
basic upgrades
14psi
1/8th - 8.48 @ 85mph 2.01 60ft
DrIvEsldEwAyS
11-02-2008, 07:33 PM
1/8th mile with bolt ons and s15 t28 on 14 psi was a 8.2 spinning 1st and 2nd
1/4 mile with s15 t28 was a 13.4 @ 109 spinning 1st 2nd and bogging when catching 3rd.
new setup should be high tens, gt35r, built, ect...
s14driver
10-04-2009, 10:56 PM
8th mile with stock ka24de 11.2
2000wrx
01-26-2010, 06:44 PM
seems like these cars are a lot like supras on the track, spin fest.
sr20detconv
02-04-2010, 11:23 PM
13,
[email protected] on street tires
S13
sr20
t28 at 18psi
fmic
exhaust
intocarss
02-05-2010, 12:02 AM
68 NA Camaro
60' 1.24
1/8 et 5.60's
1/8 mph 123
1/4 et 8.70's
1/4 mph 159
idamaster
04-10-2010, 09:52 AM
Blacktop s13
Fmic
t25 @ 8PSI
1.5mm HG
Walbro pump
Exhaust
Street tires...hence the 60ft
60 2.1
1/8
[email protected]
1/4
[email protected]
I went expecting high 13's low 14's. Im impressed, shows what a little driving skill can do.
BlackZenkiS14
04-11-2010, 05:31 PM
S14 SR. Full weight. Only mods = diff, intake, exhaust, FMIC. No tune, stock everything else on 15psi.
13.10 @ 107.8 mph
1.96 60' on 255/40/17 street tires (g-force sports)
vBulletin® v3.8.11, Copyright ©2000-2021, vBulletin Solutions Inc.