PDA

View Full Version : Low Profile FMIC for KA-T or S13/S14 SR $200

drift into a curb
10-03-2007, 08:05 PM
Used this on my KA-T with a GT28 at 14psi and it worked great. The overall dimensions (at it's widest points) of the IC are about 22x10x3.5.
Custom piping etc. Will come with a 45* coupler for T28 set up, but you can just get a 90* to run on the T25 just fine. Intercooler core is from a GTiR Nissan car. I bought it in that condition for $80. I setup the intercooler so it would have a higher clearance away from curbs and stuff lower to the ground unlike all the jdm set ups, so the piping is shorter! I don't run a front bumper reinforcement but I'm sure you could get it to work ;) Hot side is like SR with 2" diameter piping (I believe, but I'll have to check) and the Cold side is 2.75". The couplers alone were about $100 and piping was about $70. Then the clamps were about 25 for liner clamps, not the cheaper gator clamps. Everything you need for installation. So all about was $275. Take it for $200 OBO! I don't care for low ballers and they will be posted as examples, so be careful! Can ship but you pay shipping.. Located in Anaheim, CA

Cold pipe and hot pipe, easy to access and unbolt.
http://img.photobucket.com/albums/v343/driftintoacurb/DSCN3105.jpg
http://img507.imageshack.us/img507/8251/img0157cd9.jpg (http://imageshack.us)
http://img230.imageshack.us/img230/3267/img0159tt7.jpg (http://imageshack.us)
http://img230.imageshack.us/img230/6130/img0160on3.jpg (http://imageshack.us)
10" flex pipe for you to see what kinda clearance you have
http://img230.imageshack.us/img230/3923/img0161hl7.jpg (http://imageshack.us)
s13silvia123
10-03-2007, 08:21 PM
wanna sell that flex pipe
drift into a curb
10-03-2007, 08:57 PM
Yeah it's a 3-ply (braiding on the inside as well instead of just a flex tubing like most) 10" long flex pipe 3" in diameter. I paid $42 shipped on ebay. Asking $35 shipped. Let me know!
yokotas13
10-03-2007, 09:18 PM
hey ill get it if he doesnt
i haev paypal ready
drift into a curb
10-03-2007, 09:21 PM
Aren't you in japan or somewhere? Sent you a PM though
drift into a curb
10-04-2007, 11:39 AM
Flex pipe sold to yokotas13. Now how about the intercooler
ab180sx
10-04-2007, 01:16 PM
you cant do it for cheaper it is kinda bended but if not ill see what i can do
drift into a curb
10-04-2007, 01:27 PM
I bought it like that off of another zilvia member. It holds fine. Nothing wrong with it. It was used on his s14 sr and was pushing some decent power from what I remember and I started using it on mine. It's only a deal if you get everything though. I feel the price is pretty reasonable considering the price everything costed. Let me know.
86301s13
10-06-2007, 05:30 AM
willing to sell just the piping
drift into a curb
10-06-2007, 06:56 PM
Yes $80 bucks for the piping alone.
drift into a curb
10-09-2007, 02:48 AM
Might have to ship this thing out. No local takers?
drift into a curb
10-11-2007, 01:21 PM
On the up and up
Max_PSi
10-11-2007, 02:05 PM
Whats the inlet and outlet on the IC? I'm interested in the piping but it needs to be 2.5" in and out to work with my IC.
drift into a curb
10-11-2007, 04:45 PM
Hotpipe is 2" and Coldpipe is 2.75. It fits the throttle body exactly. It'll work, but you need a reducer on your IC. That's what I'm doing on mine. Look in the pictures. It's the red coupler.
Max_PSi
10-11-2007, 08:01 PM
Whats the inlet and outlet on the IC? I'm interested in the piping but it needs to be 2.5" in and out to work with my IC.

Sorry if I wasn't clear. I was asking about the intercooler your were running itself. I can see the reducer on the cold side of your intercooler, just wondering if the intercooler is 2.5" on the inlet/outlet. That's what size my interooler is using.

Thanks.
yokotas13
10-11-2007, 09:38 PM
seller is fantastic!!!

got my flex pipe!
drift into a curb
10-12-2007, 12:34 AM
Yes, the inlet & outlet are both 2.5" on the intercooler if I recall correctly. The inlet maybe 2.25, but I think it's 2.5 as well. I'll have to check when I get to the garage, but that can be fixed with a reducer coupler on that side as well.


Thanks yokota! I saw that you posted in the review thread as well. cool beans.
Max_PSi
10-12-2007, 06:18 PM
One last question, what are the dimensions on that IC? I know you wanted to sell locally but, are you willing to ship? I'm just looking to buy the piping off of you. I know its Friday, but hit me up with a PM when you get the chance on a price shipped. Thanks dude.
drift into a curb
10-13-2007, 08:19 PM
MaxPSI, my mistake the end tanks (inlet/outlet) are 2.25" after measuring it. From end tank to end tank is ~22 inches in length. The overall dimensions (at it's widest points) of the IC are about 22x10x3.5. You got PM in a bit.
drift into a curb
01-13-2008, 11:50 PM
Back up for sale. I was going to keep it, but decided I want something different now.
ATLspeed
01-14-2008, 04:38 PM
have any pics of it with the front bumber on?
drift into a curb
01-14-2008, 05:16 PM
Here you go!
http://img175.imageshack.us/img175/3879/img0236cv0.jpg
240love
01-14-2008, 05:50 PM
just out of curiosty how much for just the core?
drift into a curb
01-28-2008, 10:27 AM
$60 for the core. Get at me!
drift into a curb
02-28-2008, 01:09 AM
Had a buyer lined up and he flaked on me. What the!?! Last bump. Thanks zilvia!
Xandy Boosts
03-05-2008, 11:16 PM
May I ask what's the sellers name on eBay for the flex pipe? Free bump for you too in the mean time!
drift into a curb
03-06-2008, 01:54 PM
Sorry buddy. That was a long time ago. Just search 3-ply flex pipe. I hope that yields some results for you. Good luck.