camber question

[bobbyhill]

i was getting some work vs-xx 17x8+6 and 17x9+6.i was wanting to know how much negative camber do i have to run with these rims and what tire size should i run?i am also getting the fenders rolled and pulled a litte.they are also going on a s13.thanks
http://img507.imageshack.us/img507/8382/dsc04448qd3.jpg (http://imageshack.us)<br/>http://img507.imageshack.us/img507/8382/dsc04448qd3.a9c18e6077.jpg (http://g.imageshack.us/g.php?h=507&i=dsc04448qd3.jpg)

[Kouki]

That's gonna depend on what size tires you are gonna run, exactly how much of a roll/pull, how low your car is, etc. There is no set number just based off of the offset. You're just gonna have to put them on, and set it to where it needs to be. Trial and error.

[xblack240x]

Indeed trial and error is all you can do... I do remember someone saying something about someone on here who is good at giving alignment numbers though... Sorry I couldn't be of more help though..

[KA24DESOneThree]

Fronts are silly skinny so you'll have no problems with like ~-2.5*.

Rear you'll probably need ~3* depending on how far the fenders are rolled.

Neither of those numbers will cause appreciable camber wear if you keep toe close to zero in the front and actually bother yourself to corner at more than 3/10.

Swap the rear barrels onto the front centers and buy some 9" barrels for the rear centers and you're golden.

[bobbyhill]

what are you talking about swaping the rear barrels