OEM Nissan Z32 Brake Master Cylinders @ The Nismo Shop

[crazyikimasho]

Genuine Nissan OEM Z32 Brake Master Cylinder

http://photos.thenismoshop.com/z32bmc

For use when installing Z32/Skyline brakes on your S-Chassis. The middle fitting must be removed and the fitting inside one of the ports on your stock BMC must be inserted in order for this to work properly.

This is the only Z32 BMC available from Nissan now. In-stock, ready to ship or pickup

$206.84 +tax/shipping
$216.84 shipped to lower 48 states outside CA
$223.90 including tax, picked up
$233.90 including tax, shipped within CA

[Max_PSi]

Yo Justin whats up. Sent you a PM about this, along with some other items to try and finish off the head re-build. Thanks.

[drift donkey]

do you have any pics of how to install the port from the the stock BMC? I have never heard of this before.

[s14_rob]

do you have any pics of how to install the port from the the stock BMC? I have never heard of this before.

+1 thanks

msglenblah

[usdm180sx]

http://importnut.net/300zxbrakeswap.htm

[crazyikimasho]

http://importnut.net/300zxbrakeswap.htm

Thanks Norm!

[naed240sx]

S13's don't have a removable fitting in the stock master cylinder, meaning that if you want this master to work you need to get a junk MC from an s14 or Z32.

[CKAMC]

what plunger size are you selling justin? 17/16's? 1 inch?

[usdm180sx]

S13's don't have a removable fitting in the stock master cylinder, meaning that if you want this master to work you need to get a junk MC from an s14 or Z32.

Well, Justin's selling z32 master cylinders. What does the s14 MC have to do with this topic?

[crazyikimasho]

S13's don't have a removable fitting in the stock master cylinder, meaning that if you want this master to work you need to get a junk MC from an s14 or Z32.

Actually yes S13 fittings are removable if you read the thread that Norm linked it will show you how.

[Ragnarok043]

or you can do what i did, and used a bubble flaring tool kit to modify the hard brake lines to work without the fitting. i think it cost me around $20 for the kit.

[crazyikimasho]

or you can do what i did, and used a bubble flaring tool kit to modify the hard brake lines to work without the fitting. i think it cost me around $20 for the kit.

Yeah thats not a bad idea, probably a little easier.

[s14_rob]

Regardless of whether or not you have ABS, the 300ZX master cylinder will work. If you do not have ABS, you will need to remove the plug from the second front brake line port, illustrated below. If you have ABS, you do not have to remove the plug. In that case, skip to the master cylinder installation.

i have abs so i dont have to remove the plug just thought id post that

[crazyikimasho]

i have abs so i dont have to remove the plug just thought id post that

Much appreciated. Thanks!

[flytwa78]

How much will shipping be to Guam. 96932

[usdm180sx]

Hafa Adai! I'll be stopping over in Guam this Friday enroute to the Philippines!

[crazyikimasho]

How much will shipping be to Guam. 96932

Shipping should be like $20.00

[pr0tus]

what plunger size are you selling justin? 17/16's? 1 inch?

I would also like to know what size these are.

[s14_rob]

ill be placing my order next week some time but i if you should do a groupbuy with a brake rebuild kit lol... just a thought

[crazyikimasho]

ill be placing my order next week some time but i if you should do a groupbuy with a brake rebuild kit lol... just a thought

Rebulild kits are no longer available from Nissan. Hit up your local NAPA for those, they actually sell them


I would also like to know what size these are.


These are 17/16

[UNISA JECS]

Actually yes S13 fittings are removable if you read the thread that Norm linked it will show you how.

Im not saying that they there all are not removable but atleast 4 S13 I have worked on (replacing there brake master) did not have the removable type fittings there were cast into the BMC therefore not removable.

HINT: If you use NABCO use NABCO fittings, if you use TOKICO use TOKICO fittings or they will fit to loosely in one situation and not fit in anotehr situation...

[flytwa78]

Item received. Thanks!

[crazyikimasho]

Item received. Thanks!

Awesome! Glad you got it alright.

[crazyikimasho]

Also cheaper aftermarket version now available!
Click here to order!! (http://www.thenismoshop.com/ikorb.php?func=catalog&category_id=3765&product_id=12313)

http://www.thenismoshop.com/items/it_13042608.jpg