PDA

View Full Version : SR Wiring... Two Main Ignition Power wires?


Propaganda
08-25-2007, 04:52 PM
Well, I think I know why my SR20DET has no spark, it is because I wired the plugs wrong.

There are two Blue/Red wires coming from the SR20DET E.F.I harness. One is thick, while the other is skinny. Which one do I solder to the KA24DE plug? I am guessing the thicker one, but what if it was both?

I know that the Blue/Red, Black/Red, and Brown and the wires from the SR20DET goes to the Black/Red wire. I have two Blue/Red wires and was wondering which of the two go to the Black/Red wire on the KA24DE plug

http://i17.tinypic.com/4xlrneg.jpg
http://img521.imageshack.us/img521/8254/dsc05906vx1.th.jpg (http://img521.imageshack.us/my.php?image=dsc05906vx1.jpg)

ladiesman8527
08-25-2007, 06:23 PM
you use the thicker blue/red wire.

HellonFire
08-25-2007, 10:08 PM
You should have the Brown, Thick Blue/Red, and Thick Black/Red all soldered to the same place.

Tyler