Complete JDM Climate Control System plus Extras

[Myssan]

Yeah, my car is gradually taking the direction of a track car. The more I think about it having a fast car for the street makes no sense. So instead of doing the conversion I took all the a/c stuff out of the car. Condenser, lines, compressor, dryer. No my car should run cooler on track.

Now as for what I have. I have everything to make the JDM climate control system functional. Not just the dash unit that blows warm air. The goal was working a/c. So here's the list.

Two dash units: $40 each
One entire uncut harness: $120
Extra fan resistor, sunload sensor, blend door motor: $35, $10, $15
Welded pipe for SR compressor: $50
new dryer: $30
JDM gage bezel with vent holes for interior temp sensor: $30
All other parts needed if you want them. (compressor $75, condenser $40, misc piping $10, fasteners (free), the JDM evap core, the JDM fan, JDM heater core: All three for $30)

JDM Fan resistor
http://www.turbotimelounge.us/albums/shane/ahv.jpg
Other misc parts: (tube for interior temp sensor, goes behind the gage bezel, plugs, fasteners, sun load sensor)
http://www.turbotimelounge.us/albums/shane/ahu.jpg
Evap core, heater core, and Fan box with blender door motors intact:
http://www.turbotimelounge.us/albums/shane/aht.jpg
http://www.turbotimelounge.us/albums/shane/ahs.jpg
line that has the JDM compressor fitting welded on
http://www.turbotimelounge.us/albums/shane/ahr.jpg
http://www.turbotimelounge.us/albums/shane/ahq.jpg
Entire uncut harness
http://www.turbotimelounge.us/albums/shane/ahp.jpg
Dash unit
http://www.turbotimelounge.us/albums/shane/aho.jpg

[racerx2k1]

I will take these:

One entire uncut harness: $120
Extra fan resistor, sunload sensor, blend door motor: $35, $10, $15
the JDM evap core, the JDM fan, JDM heater core: All three for $30

Shipped to 60169

Have paypal

[devonkyle77]

can you hold that Welded pipe for SR compressor: $50
for a week?
also, is that the low pressure line or hi pressure line?

[Garythesnail]

how much shipped for the fan resistor, blend door motor and the a/c compressor shipped to 98012?

[fromxtor]

Bump, for a 100% reliable seller.

[Myssan]

can you hold that Welded pipe for SR compressor: $50
for a week?
also, is that the low pressure line or hi pressure line?
I can hold it if you give me a deposit. I take pay pal. Its the low pressure line I think. (its the one that runs near the turbo from the firewall to the compressor)
how much shipped for the fan resistor, blend door motor and the a/c compressor shipped to 98012?
I don't know how much shipping is until I get it weighed. I would guess it would be about $15 to ship. The guy above you wanted both fan resistors. But he hasn't sent payment yet. If you want the stuff pay pal me and I'll ship it out asap. We can settle shipping costs once it's mailed. Or add like $20 extra and I'll return the balance to you. [email protected]

Racerx2k1: If you wanted both fan resistors let me know. You can pay me now for the stuff you wanted and we can settle up for shipping later. Otherwisze I have to sell to the first person that actually gives me money. I have your stuff boxed and ready to go out. I just need the payment.

Please note everyone: I can't hold items without a deposit. I've parted out stuff before. 90% of the time people aren't serious and don't actually buy the stuff. Then I'm stuck with it b/c I turned down potential buyers.

[devonkyle77]

i definately want that Welded pipe for SR compressor: $50
i will get funds to you asap

[Myssan]

ok, I sent out everything to racerx2k1.
i definately want that Welded pipe for SR compressor: $50
i will get funds to you asap
ok.

[devonkyle77]

can you please send me a payment request to [email protected]
thanks!

[Myssan]

can you please send me a payment request to [email protected]
thanks!
sure, no problem.

Hey, racer2k1... I don't know where you are all of a sudden but you owe me for shipping. Check your inbox and your emails. A paypal payment request is waiting for you. I miscalculated your shipping. Its actually only $41.00.

[devonkyle77]

payment sent

[devonkyle77]

any chance you shipped that yet?
let me know, need to get it in my car, lol

[Myssan]

yeah, it's shipped. It took me a while since I've been getting out of work really late. 12-13 hours days suck.

[devonkyle77]

received it today, however the end that screws onto the line on the firewall is a different size...can you shed some light on this?

[Myssan]

That's really weird. I have no idea why it would be different. I have all those lines still on the floor of my garage. If you need those I can send those too. Make an offer. PM me.

[FRpilot]

received it today, however the end that screws onto the line on the firewall is a different size...can you shed some light on this?

the part that bolts onto firewall is different between 89-90 and 91-94. idk about s14s, but most likely 91-94 sizing as well.

if you have an 89-90, swap it with 91-94 box under the dash or if you have 91-93 swap in the 89-90 box thingy. or you can weld on the appropriate usdm fitting for your year car.

[devonkyle77]

i dont have access to anyone that can weld this thin stuff

[Myssan]

Im sorry I can't help you man. Like I said you can try the other parts I have but then they might not thread to the condenser pipes. I was expecting that you were putting this in an S14 since this is all S14 climate control stuff. I don't know what year car you have.

[devonkyle77]

97 s14.........................

[Myssan]

I still have some random stuff left. A/c bracket, SR compressor, sunload sensor, gauge bezel with ambient temp sensor vent and tube. Additional dash unit.