Log in

View Full Version : s13 5 lug conv question


Topnotch
08-16-2007, 08:15 PM
i installed the ichiba or s5 something or the other 5 lug kit on my car and just bought some s14 rotors and used my stock non abs calipers.
well the rears seamed to work fine but the front rotor hat was different so the rotor iis pushed a little bit closer to the side of the caliper bracket.also the rotor was slightly taller in diameter.
the rotor actually rubed the top of the caliper bracket. after i bolted the wheel on i tryed to turn it and it locked up after a quarter turn. so i had to grind my caliper bracket and my rotor to fit
did anybody else run into something like this?
What rotors did you guys use?
and what calipers?

5t341tH
08-16-2007, 10:03 PM
i used s14 rotors and just kept my stock calipers.
i bought 95 rotors btw

thejapino
08-16-2007, 10:16 PM
I had no problems with it. My oem caliper worked fine with 95 se rotors. Maybe you were given the wrong rotors?

DOOK
08-16-2007, 10:20 PM
i bet they gave you the ABS version or something

240on430
08-16-2007, 10:59 PM
i installed the ichiba or s5 something or the other 5 lug kit on my car (http://www.zilvia.net/f/showthread.php?t=154016#)


which kit did you install?

VAs13
08-16-2007, 11:59 PM
so if i get the 5 lug hub, and s14 se rotors, my stock calipers will still work?

5t341tH
08-17-2007, 12:20 AM
so if i get the 5 lug hub, and s14 se rotors, my stock calipers will still work?
yes s14 and s13 calipers the same

FaLKoN240
08-17-2007, 01:27 AM
I used new NAPA rotors on my S5 Ichiba shit, and I had no problems, sounds like you had the wrong rotors.

VAs13
08-17-2007, 02:01 AM
will the s14 5 lug hubs work also?

FinalDrive
08-17-2007, 07:46 AM
i bet they gave you the ABS version or something

i used ABS rotors from my 95 on my 93 with S5 hubs
they fit fine

FaLKoN240
08-17-2007, 11:16 AM
will the s14 5 lug hubs work also?

Clarify your question better next time.

Front S14 -> S13 = No.

Rear S14 -> S13 = Yes. I have S14 rears on my car currently.

orange13donkey
08-17-2007, 11:19 AM
yep...i did the 95se 5 lugs with stock calipers and everything works fine.

projectRDM
08-17-2007, 12:01 PM
To clarify, ALL ABS rotors are slightly larger in diameter. Also, ALL 97-98 models as well as convertibles use the ABS caliper/rotor setup, whether they have ABS or not, so if you got a set of 5lug rotors off a 97-98 they're larger and will rub the caliper. Your options are to switch to ABS calipers, or get 95-96 rotors.

Topnotch
08-17-2007, 08:54 PM
To clarify, ALL ABS rotors are slightly larger in diameter. Also, ALL 97-98 models as well as convertibles use the ABS caliper/rotor setup, whether they have ABS or not, so if you got a set of 5lug rotors off a 97-98 they're larger and will rub the caliper. Your options are to switch to ABS calipers, or get 95-96 rotors.

uhh thanks for the clarification. I believe that i used the 98 rotors on my non abs s13 but i dont remember for sure.
What do you guys use for 5 lug slotted and or drilled rotors for cheap?

thejapino
08-17-2007, 11:13 PM
ebay = cheap

junkyard + resurface = cheaper