PDA

View Full Version : is this normal???...VIDEO

ecuastyle84
08-09-2007, 01:02 PM
ok so today i tried bleeding my clutch and i was searching other threads thats relative to my problem...my car would go into gear when its off but when its on it doesnt....when i put it in gear and turned on the car it jumped(meaning it moved)...but hes my question, well let the video explain....is this normal for the TOB to do?.....i have an redtop sr20 with the stock clutch:-/
http://myspacetv.com/index.cfm?fuseaction=vids.individual&videoid=15390693

dont mind the fan noise it is hot ass balls outside

also hes some pocs of the stock clutch before it went in...does it still have life on them left?
http://i28.photobucket.com/albums/c233/ecuastyle84/100_2624.jpg
http://i28.photobucket.com/albums/c233/ecuastyle84/100_2625.jpg
http://i28.photobucket.com/albums/c233/ecuastyle84/100_2626.jpg
http://i28.photobucket.com/albums/c233/ecuastyle84/100_2689.jpg
ecuastyle84
08-09-2007, 03:05 PM
bump bump bump....anyone?
ecuastyle84
08-09-2007, 05:15 PM
is there anyone that can help me with this?
georgesal
08-09-2007, 05:21 PM
this happened to me as well my problem was the pivot ball on which the clutch for picots was broken, and u shouldn't really pull on the for because this can unclip the fork from the pivot ball if it is not broken
UNISA JECS
08-09-2007, 06:04 PM
I had a similar problem as you describe and it turned out that that clutch disc did not fit properly on the transmission input shaft do to a manufacturer defect of the clutch disc, it went on but only about 1/4 - 1/2 inch before it meet resistance and would not go on any further therefore when the transmission was put on it further forced the clutch disc againt the flywheel more-or-less in an engaged position so even when I went to depress the clutch pedal to disengage nothing would happen and the car would be stock in gear until the car was turned off.....I think I put the transmission on about 5 -6 times that day....so what lessened I learned was to always test fit the clutch disc on the transmission inputshaft first...end of story hope this might help.
ecuastyle84
08-09-2007, 07:22 PM
I had a similar problem as you describe and it turned out that that clutch disc did not fit properly on the transmission input shaft do to a manufacturer defect of the clutch disc, it went on but only about 1/4 - 1/2 inch before it meet resistance and would not go on any further therefore when the transmission was put on it further forced the clutch disc againt the flywheel more-or-less in an engaged position so even when I went to depress the clutch pedal to disengage nothing would happen and the car would be stock in gear until the car was turned off.....I think I put the transmission on about 5 -6 times that day....so what lessened I learned was to always test fit the clutch disc on the transmission inputshaft first...end of story hope this might help.

hmmm dats properly my problem but i know i put everything on correclty cause i had no problem putting the tranny back in...and i used the alignment tool....damn this sucks
UNISA JECS
08-09-2007, 07:30 PM
I should also not that it was a bitch removing the tranny everytime becasue I had to overcome the tranny input shaft being stuck onto the clutch disc and vise versa for putting it on.
unicoladron
08-09-2007, 08:54 PM
dude, you should def get your flywheel resurfaced, looks like alot of moisture got inside the bellhousing. and according to the video, it was difficult for me to tell which way you were pushing the fork. but i'm pretty sure you were pushing it the opposite way the slave cylinder pushes it anyway. don't worry about play in that direction, you just need to worry if it moves in the direction the slave cylinder pushes it. plus, you wouldn't be able to do that by hand, unless you have hydraulic hands.
unicoladron
08-09-2007, 08:59 PM
if u want, i'm currently selling a nismo clutch disc that came off my SR and the pressure plate/clutch cover, good cond. here's some pics

http://i198.photobucket.com/albums/aa231/unicoladron/IMG_0031.jpg
http://i198.photobucket.com/albums/aa231/unicoladron/OldNismo.jpg
ecuastyle84
08-09-2007, 11:24 PM
if u want, i'm currently selling a nismo clutch disc that came off my SR and the pressure plate/clutch cover, good cond. here's some pics

http://i198.photobucket.com/albums/aa231/unicoladron/IMG_0031.jpg
http://i198.photobucket.com/albums/aa231/unicoladron/OldNismo.jpg


nah the bellhousing was just clean...before it looked alot dirtier....how much for the clutch?