FS: 18x10 - 18x11 WEDS KRANZE 5x114.3 !!

[JDMPalace]

I have set of Weds Kranze in 18x10 and 18x11 in 5x114.3 bolt pattern, I don't know the offset on the wheels since they didn't come with any sticker on them, but by looking at them I could say they are between 0 ~ low 10s, They are used and you can see the condition in the pictures, but they are straight and have no kind of damage to them to make them not usable. I can get the lips redone and make them new for extra charge but I'm asking $850 shipped or best offer !! Please let me know if you have any question, paypal payments add 3% fees !! You get what you see in the pictures !! They can also be picked up in Sacramento area !!

http://img.photobucket.com/albums/v363/boxybox/goldkrnze1.jpg
http://img.photobucket.com/albums/v363/boxybox/goldkrnze2.jpg
http://img.photobucket.com/albums/v363/boxybox/goldkrnze3.jpg

[westcoastpj]

how much picked up?

[busyman_88]

trades? pm me please

[JDMPalace]

I need emergency cash !!
Local pickup, I can do $775 cash or $800 paypal !!

[whatjohnboy]

cool rims...wheres folsom??

[drifter808]

is it just the picture or does one of those rims look bent?

[bstonedrift]

That lip is definately bent

[Okinawandrifter87]

cool rims...wheres folsom??

In Sacramento! Bumpity bump for this guy! Hes a cool cat with and even cooler car!!! :naughty: Posi rep for JDM Palace

[JDMPalace]

I'm going to check that lip, and take another picture of that wheel !! also measure the lips since I have been getting PMs about lip sizes !!

[pbcstylez]

hey sean, can you quote us how much it would cost to refinsih these bad boys?

[JDMPalace]

Sorry I forgot to take my camera with me to take more pictures but I rechecked them again I can not see any type of damage to the wheels right now!! That area in the picture seems to be an older damage which has been fixed but again I really have to put my hands on it to feel it and I don't see any type of welding so must have been small curb damage which they fixed before I got the wheels, but that just from light reflection showing it like that, I put the wheel on balancer and it rotated fine so I don't know what else to say!! And I guaranty they are not bent LOL!!

About the lip size the Front is 3~3.25" and Rear 3.75 ~ 4" depending where you measure it too and no this not from taking damn ruler inside the center like some people do here that is the measurement of the polished part!!

Thanks again, if you need more picture let me know, I'm coming back in town tomorrow so should be able to take more!!

[DOOK]

damn people, I saw a newer set of these sell on here last week for 2200, these are more than a thousand dollars cheaper. jump on em, nice wheels.

[sw20>>s14]

sorry, double post...

[sw20>>s14]

sean,

https://www.rsracing.com/tech-wheel.html

measure the backspacing, and youll get your offsets (barring that the offsets arent too high to even appear on the chart)...theyll look yummier once ppl see the offsets...these whores, haha...

cheap cheap cheap!!! if i was crazy enough (im a 9.5 max kinda man...er, wheelwise...WHEEEEEEELWIIIIIISE!!!), id run these in a heartbeat...

edit: oops, double post...how did that happen? whatever...

[DOOK]

fuck yeah, I wish I was baller enough

[YUNG DRIF]

Sorry folks SOLD SOLD SOLD, and i dont flake for you guys who wish i do.Lol

[JDMPalace]

I'm getting PM about color name of the centers, the centers are Factory Gold I didn't paint them and in fact they are in very good condition compare to damn lips !!

I can make these look brand new, polish inside and outside for about $500 and shouldn't take more than week !!

I'm leaving for a meeting and not comming back till Friday afternoon so pick up have to wait till then !!

Thanks again for all interest, I'll be posting Three more sets of wheels by end of this week

18x9 +28 18x10.5 +33
18x9 +24 18x10 +24
19x9 +28 19x10 +0
19x10 +0 19x12 -6
19x9 +24 all around,

Pick your size !!!

[sw20>>s14]

nice catch...just dont go and be a no good reseller...should look baller on a hatch...

[JDMPalace]

Well, they are not SOLD yet, I sell them to who ever makes me the best offer :hsdance:

[JDMPalace]

He has the best offer and also willing to pick them up so I think he is the new owner but we'll have to wait till Friday !!

[pbcstylez]

whats his current offer so i can outbid him

[YUNG DRIF]

hmmmm, let me add some insurance anybody buy these rims ill find out were u live cool dude

[rancid240]

I dont know about the angles making the look bent. The three pictures are from different angles and the lip looks bent in all of them.

[sw20>>s14]

haha, threats are always good...lol...

[YUNG DRIF]

Its not a threat. I put that on mammies

[pbcstylez]

haha... come to daddy than

[YUNG DRIF]

im just kidding you can have them, but for a higher price

[eclipse_spyder]

you have a pm

[babowc]

wow..
if i wasnt fucked by the last GB, i'd be all over these..

GLWS, im suer you wont need it!

[Irukandji]

Sorry folks SOLD SOLD SOLD, and i dont flake for you guys who wish i do.Lol

You flaked on my mustang wheels and never had the courtesy to even pm me.


To OP I want the wheels, are they sold?

[YUNG DRIF]

Yea your mustang wheels sir, i need stock 240sx 5 lug smart UC Davis student c'mon Jim

[JDMPalace]

Damn Just got in Denver and the weather is so much nicer than Sacto up here !! anyway well I don't want to flake out or anything or start a war but I do have $1000 offer on them right now!! So I dont know, As I said and I need the cash bad and I know these are worthed that much but I wanted easy sell so I put a a good price for them. I didn't collect any money from young drift and he did offer me $775 as I asked for pick up price, mhh this is so hard right now, I'm going to bed and wait till morning!!

[snatch13]

Yea your mustang wheels sir, i need stock 240sx 5 lug smart UC Davis student c'mon Jim

are you a fucking idiot? mustang's and 240's have the same bolt pattern... these wheels are the same pattern as well...

I say take the offer of a grand and screw the flaker/dumbass...

[YUNG DRIF]

space msg lenght

[JDMPalace]

Common guys, not on this Thread !! Please !!

[z32gizzle]

so do you still got em? cause if so ill take them tomorrow got money in the bank 800 shipped?

[JDMPalace]

I do have a $850 local pick up offer and $1k shipped offer on them.

[z32gizzle]

ill see what i can do but thats a big jump not saying its not worth it..just gotta see and wtf will i need to make these hoes fit on s14 kouki... full suspension

[cvc9216]

I was the first person to inquire about the wheels and I agreed to buy them for asking price. Now you haven't even bothered to respond to my PMs. I would've paid more for them, but oh well I'll take my business elsewhere. If you have an offer for $1000 shipped why aren't they sold? Waiting for higher bids or just trying to drive the price up?

[JDMPalace]

You did PM me about them and no you were not the first Person, you asked couple of questions and I answered one of the here and the other one I said I have no way to measure which was the offset!! So don't post here and complain I didn't respond!! If you were interested you would have PMed me back after reading the thread!! Yes thoes are the two highest offer and if tomorrow the local buyer showed up with $850 (youngdrift) they are sold to him if not then they go to a guy in oregon for $1000. As of now no they are not sold and I'm not going to say they are. So what is the issue now. if I wanted to drive up the price I would have sold them to guy with $1k offer already, youngdrift wants these and they are his if he'll take them tomorrow.

[cvc9216]

I did PM you again. Twice with no response. Looks like you run a business, maybe you should learn how to do business. This isn't ebay

[chnsx7]

interested check e-mail

[JDMPalace]

I did PM you again. Twice with no response. Looks like you run a business, maybe you should learn how to do business. This isn't ebay

Dude I'm not here to argue with you over set of wheels, but ebay, where did you get that idea!! You said measure something and I did, and posted it, while you are thinking someone elses took them the way they are, without asking any question, and this is before I respond to your question so what did I do worng here, that makes me a bad business man, so should I tell him sorry someone is thinking about them, you said you want them, but howmany PMs should I post here with that exact words, then you send me a PM at 10 PM the night that young drift at 5 PM put deposit down for the wheels (local buyer), so what did want me to tell you, I assume you read the topic, there is so much these PM boxes hold. Again sorry about miss understanding, or what ever you like to call it, but don't judge people like this.

[StaticX27]

He's mad because he's not getting a set of well priced wheels, of course he's bitter :P

[chnsx7]

are they sold to me yet?

[YUNG DRIF]

yes everyone there sold.Leave sean alone. But he does have hella other sick ass rims hell post them im sure I can SOLD SOLD SOLD. I have to go now and stare at them Goood bye

[JDMPalace]

Yep They are sold and no I'm not that :bs: just to make $100 box more sell them to another person, he put deposit down and he picked them up for the asking price, Thanks again Zilvia and YoungDrift !! So no Ebay dibbing here !!

[chnsx7]

Yep They are sold and no I'm not that :bs: just to make $100 box more sell them to another person, he put deposit down and he picked them up for the asking price, Thanks again Zilvia and YoungDrift !! So no Ebay dibbing here !!


so are you going to pm me the prices for all the other sets you have for sale?

thanks

[JDMPalace]

I didn't get any PM request for any prices !!

[ni5mo240]

def some nice rims, saw them when yung drif bought them earlier, Sean is a good seller

[chnsx7]

I didn't get any PM request for any prices !!

lol i e-mailed u, but now i just PMed you

[pbcstylez]

aall this drama over a set of rims damn... ppl here...

[ThatGuy]

Wheels are sold. Thread is over.

:lockd: