Wheel Fitment Advice - Advans

[The Island]

s13 hatch with stock fenders
suspension - D2 track coilovers
wheel size - 16x8 all around
wheel brand - advan sa3(old school super advans)
offset - +32 all around
tire size - 225/45

what size spacers, allignment specs, and fender modifications would i need in order to get these to fit as flush as possible?

[20 til 3]

How low do you want the car to be? If your moderately low i would do a 30mm spacer and maybe grab a newspaper and roll it up to roll the inner fender lip. If your dumped, do a 20 mm spacer and the paper roll...

you shouldnt need to do much for camber... -1.5 or w/e you need for how you drive your car

[axiomatik]

there's a wheel whore/fitment thread already. but i'd probably put about a 30mm spacer on there, drop it, and then determine what I need to do to the camber and fenders.

[The Island]

i want it dumped, like i already am. would a 30mm spacer be too much?

[Taniguchi_Is_#1]

^^^ anything less wouldn't be enough. 16x8 0 offset is just about flush. besides that, you can't stretch tires on an 8, unless you're running some uber thin tire, so you can never be flush flush.

[Luvs2slide]

^^^ anything less wouldn't be enough. 16x8 0 offset is just about flush. besides that, you can't stretch tires on an 8, unless you're running some uber thin tire, so you can never be flush flush.

Of course you can stretch a tire on there.

It just depends on how "Far" you want it to go. I would probably run a 205/40 on there. Are all the wheels 16x8? If those are the wheels you want, they mount them all around first. Then you can determine exactly what spacer you need, if any, and how much to roll/pull fenders. Then use camber to further adjust it if need or if you want it for looks.