HELP! z32 caliper bolts

[CusCo_S14]

I need help finding z32 26mm caliperbolts that connect the two halves together, when I took them apart 2 of them were hard to get out but when I did they were crossthreaded, anyone know where I can locate these so I can finally put these on. I tried Ace hardware but couldnt find anything after an hour, either to long or coarse thread

10mmx100mm, 1.25 thread pitch, fine thread

[s13rookie]

if you cant find them locally or at home depot/lowes, try these places:

http://www.boltdepot.com/Catalog.aspx?wt.srch=1&wt.mc_id=4http://nutsandbolts.com/

nutsandbolts.com

[Luvs2slide]

I need help finding z32 26mm caliperbolts that connect the two halves together, when I took them apart 2 of them were hard to get out but when I did they were crossthreaded, anyone know where I can locate these so I can finally put these on. I tried Ace hardware but couldnt find anything after an hour, either to long or coarse thread

10mmx100mm, 1.25 thread pitch, fine thread

there's always the stealership. If you do go to a hardware store, try and make sure the bolts are strong enough to support it.

[projectRDM]

Our local Ace had them when I replaced mine, in numerous grades even. Maybe try a larger store.

[Jung918]

Since you are local and I am such a nice guy, check out Mcfadden-dales. Take the I-5 north to the 55 south. Take the Edinger exit and turn left. It will be on the right hand side right after the motorcycle shop.

[GSXRJJordan]

^^^ good info Jung! I'm by there all the time for work ~