FS: 2001 S15 Spec R Gauge Cluster

[chad_everson]

Trying to sell the gauge cluster out of my s15. Will sell for 200 bucks.


http://i24.photobucket.com/albums/c2/chad_everson/S15newpaint/100_2377.jpg

-Chad
541-337-8073

[INeedNewTires]

how easy to bolt that sucker into an S14a 97 obdII?

[chad_everson]

never tried to put it into a s14. Only s13 so I do not know..

-Chad

[elemeno]

how hard was it to get into an S13? and how'd it look?

[chad_everson]

it was easy to get into the s13, it looked really good. I can see if I can get him to send me some pics of it.

-Chad

[qt_240]

was there alot of work to get into an s13?

[uwntsum]

it will fit in a s14. slight gaps on each end. Hard part about getting it to work is getting the speedo signal to work since s15 has the speed sensor in the rear diff and not in the tranny.

[NI_YON_Zenki]

it will fit in a s14. slight gaps on each end. Hard part about getting it to work is getting the speedo signal to work since s15 has the speed sensor in the rear diff and not in the tranny.

So, this would simply require a change of wiring between the speed sensor of the s14 transmission & the s15 speedo sensor location in the cluster? or is there another part that needs to be had?

seems like a simple rewiring, reroute to compensate the difference, no?

[chad_everson]

So, this would simply require a change of wiring between the speed sensor of the s14 transmission & the s15 speedo sensor location in the cluster? or is there another part that needs to be had?

seems like a simple rewiring, reroute to compensate the difference, no?



thats it..

-chad

[Nerf]

If anyone is interested, I can post a pic of my S15 cluster in my S14. It doesn't look pretty, but it is fully functional. As far as wiring and all, I'm not sure. It was swapped in by a previous owner.

[SimpleS14]

If anyone is interested, I can post a pic of my S15 cluster in my S14. It doesn't look pretty, but it is fully functional. As far as wiring and all, I'm not sure. It was swapped in by a previous owner.

post a pic.......

[avs0730]

yes post a pic :aw:

[grnappletree14]

If anyone is interested, I can post a pic of my S15 cluster in my S14. It doesn't look pretty, but it is fully functional. As far as wiring and all, I'm not sure. It was swapped in by a previous owner.

yes please do post a pic thanks

[Hooorahh!]

info on how hard is it to put on a s13? pix on how it looks? if its easy then i may get this off u !!! i didnt think .. or as amatter of fact dont see this being easy to plug in to a s13

[Nerf]

This is the only pic I currently have of it. When I can find drivers to make my bluetooth adapter work with my vista laptop, I'll get better pics off my phone.

It's missing the whole outer bezel (i dunno the actual name of the piece either). I assume that it was probably either cut up so much to make it fit that it ended up looking like trash, or it just wouldn't fit properly with it. If anyone knows anywhere that I can get a nice custom piece specifically for this (cf would be preferred to match my interior), please pm me with info! ^_^

http://members.cox.net/kuupo/P1030043.jpg

[uwntsum]

So, this would simply require a change of wiring between the speed sensor of the s14 transmission & the s15 speedo sensor location in the cluster? or is there another part that needs to be had?

seems like a simple rewiring, reroute to compensate the difference, no?

From what i've read over the past yrs. its not that easy. there's a thread somewhere on zilvia or freshalloy where a few of the guys got it in and working. One of the members that had it installed happened to have a full s15 sr swap with the tranny and hlsd. Which all he had to do was get the JDM FSM and S14 FSM and trace and splice wires. I know that the s15 cluster is a closer fit in a s13 than a s14. Maybe u guys can convince Nerf to pull out his cluster and take nice digi snaps of the wiring so it will cut down on alot of the work. ;)

[2forty]

i would also like to see pics of it in an s13! also details on hard it was to swap and wiring! :thumbs:

[chad_everson]

anybody wanting to pick it up???

-Chad

[slider2828]

I can pick it up, but man it would have to be really cheap. hahahah...

[chad_everson]

ok 199 and its yours

-chad

[chad_everson]

need it gone

[mayco_86]

You have a PM

[chad_everson]

pm replied

-chad

[chad_everson]

200 bucks. need gone

-chad