Engine Trouble - w/ VIDEO!

[JDM SiL80]

Well everytime I start the car and try to move it, it just boggs. It does this for some time till it gets alittle hot and then it runs fine. It is a stock dual cam KA with 105k miles on it.

Here is the vid so you know exaclty what I mean.
http://i2.photobucket.com/albums/y35/JDMSiL80/th_IMGP0623.jpg (http://s2.photobucket.com/albums/y35/JDMSiL80/?action=view&current=IMGP0623.flv)

When I accelerate just a tiny tiny bit the revs just fall to like 500. When I release the gas is when it jumps back up to idle.

Has anyone had this problem or know what it could be?

Thanks in advanced guys!

[JDM SiL80]

Anyone? lol any help is really appreciated.

[bZeRk187]

Muffler bearings are worn out. I'm sure someone on Zilvia has the hook up on a pair. GL

[GSXRJJordan]

muffler bearings! lol coming from the guy with 9 posts and a red square.

looks like your idle control is fine, cause it keeps jumping back up to idle... I really don't know what it is, short of a weird vacuum leak... did you just pick up the car, or has it steadily gotten worse?

[bZeRk187]

... I really don't know what it is

Seems like you provided just as much help.

And WTF is wrong with suggesting muffler bearings? Have you checked yours lately bitch?

[s13_redSILVIA]

car shakes like that in idle??...well if it is i hav same problem cuhz my dads a mechanic and he told that is a bad injector running on 3 cyl...hope this helps :x:

[projekt_s13]

It sounded like you are miss firing, I slightly have the same problem. When I just start the car up and drive off it bogs a bit dropping about 500-700 rpms from where im at (like if im at 2500rpm it drops to about 2k). This only happens for about 2 minutes until the car warms up, weird thing is that if i push the clutch in and accelerate the rpm climb up like nothings wrong.

It used to bog alot but I used seafoam and it made it better.

But yea It might be your Muffler bearings, lol

[SnakeKack]

Do a tune up and see what happens.

[nassin31spr]

Do a tune up, do a compression test and see if your car jumped timing. It almost sounds like some metal on metal contact. Take off the valve cover and check the chain guide.