Mark Slide Squad
06-18-2007, 11:19 PM
Bought them for my RB26 I was gonna build, but going another route. They are 87mm (1mm overbore) with all rings, pins and locks. It's 8.5:1 compression. Gimme $650 shipped in the USA. Or pick up in Van Nuys, CA. email [email protected]
Bore (mm): 87.000mm Piston Style: Dome, with no valve reliefs Piston Material: Forged aluminum Compression Distance (in): 1.181 in. Piston Head Volume (cc): -14.00cc Wrist Pin Style: Press fit or floating Pin Diameter (in): 0.827 in. Gapless: No File Fit: No Top Ring Thickness: 1.0mm Top Ring Material: Steel Top Ring Facing Material: Gas nitrided Second Ring Thickness: 1.2mm Second Ring Material: Iron Second Ring Facing Material: Phosphate coated Oil Ring Thickness: 2.8mm Oil Ring Material: Stainless steel Oil Ring Tension: Standard
http://i93.photobucket.com/albums/l68/markslidesquad/RB26Wiseco2.jpg
http://i93.photobucket.com/albums/l68/markslidesquad/RB26Wiseco1.jpg
Bore (mm): 87.000mm Piston Style: Dome, with no valve reliefs Piston Material: Forged aluminum Compression Distance (in): 1.181 in. Piston Head Volume (cc): -14.00cc Wrist Pin Style: Press fit or floating Pin Diameter (in): 0.827 in. Gapless: No File Fit: No Top Ring Thickness: 1.0mm Top Ring Material: Steel Top Ring Facing Material: Gas nitrided Second Ring Thickness: 1.2mm Second Ring Material: Iron Second Ring Facing Material: Phosphate coated Oil Ring Thickness: 2.8mm Oil Ring Material: Stainless steel Oil Ring Tension: Standard
http://i93.photobucket.com/albums/l68/markslidesquad/RB26Wiseco2.jpg
http://i93.photobucket.com/albums/l68/markslidesquad/RB26Wiseco1.jpg