PDA

View Full Version : FS: Spec Stage 3 Clutch and Flywheel


willlangford
06-18-2007, 07:00 PM
I am selling my Spec Stage 3 clutch and Spec Billet Lightweight Flywheel for SR20DET.

*SPEC Stage 3 Clutch Kit for Nissan SR20DET
SPEC (Star Performance Engineered Clutches) Stage 3 Clutch Kit for Nissan S13/S14 SR20DET. SPEC increases the clamping force of the pressure plate and uses a Carbon or ceramic friction surface on the disc hold more power, yet maintain close to the same street manners as a full faced organic disc. Uses 6 puck SPRUNG hub clutch disc. This clutch kit is designed to hold up to 450 ft/lbs or torque! This is the ultimate street/strip clutch kit. This is a complete kit including high clamp pressure plate, throw out bearing, and clutch alignment tool.
SKU SN333

*SPEC Billet Lightweight Flywheel SR20DET
Billet Lightweight Flywheel Nissan SR20DET S13/S14. The new SPEC flywheels offer a low moment of inertia, allowing for quicker revs and a lower stressed rotating assembly. Weighing 15 lbs, the unit offers greater energy than lightweight aluminum flywheels, providing more desired momentum for street, drift, drag and large turbo applications, but weigh considerably less than stock for greater reliability and noticeable horsepower gains.
SKU SN22S

This was used for 10 miles for a photoshoot. In great shape, Will post pictures when I get them off the camera later on tonight.

I am asking 500 SHIPPED anywhere in the 48. Or 450 picked up in Seattle.
Thanks!

j20accord00
06-18-2007, 08:49 PM
u wanna to sell seperate, if so how much for the flywheel?

willlangford
06-18-2007, 08:54 PM
250shipped..if I can get someone to grab the clutch...

the3SecondJerk
06-18-2007, 09:48 PM
just curious....why would you need an aftermarket clutch for a photoshoot? clutch for 150?

willlangford
06-18-2007, 09:52 PM
not that cheap.. id do 250shipped..

it was supposed to be used for more.. but i got screwed by a shop and ended up parting out the car...

willlangford
06-19-2007, 01:11 AM
flywheel is sold,

250 shipped for the clutch..

willlangford
06-27-2007, 01:51 PM
flywheel is still around.

200 shipped for the clutch
200 shipped for the flywheel

bustav13t
06-27-2007, 04:36 PM
Yo, I bought the Z32 master cylinder from you about 2 months ago that turned out to be a R32 or R33 bmc, but I didn't have a chance to return it to you. Can you PM me your address again?

willlangford
06-28-2007, 11:03 AM
Yo, I bought the Z32 master cylinder from you about 2 months ago that turned out to be a R32 or R33 bmc, but I didn't have a chance to return it to you. Can you PM me your address again?

PM'ed, once I get it I'll issue a paypal refund. Thanks!