PDA

View Full Version : 300ZX complete front brakes, ball joint, Evo 8 Calipers FS/FT


motronic
05-27-2007, 02:07 PM
I upgraded my brake setup so these are no longer needed.
1. 30mm Aluminum 300ZX Front Calipers with Hawk HPS pads ($80 new), very good condition with less than 1500 miles on the pads. All hardware is included, seals and pistons are in good condition. SOLD
2. 30mm Brembo blank rotor, same miles as pads, no track/drift. SOLD
3. Complete Goodridge Z32 complete stainless steel lines, never used ($108 new). SOLD
4. R32 Skyline front brake hardline sets SOLD
5. Lancer Evo 8 front and rear calipers, all hardware is included but needs new pads. This are taken from crashed car so there are some cosmetics damage as seen in pictures. Mostly just paint chipped off though. I can provide close up pictures.
I would like to get 450 bucks + shipping
6. S14 Front lower ball joint, TRW made in Japan, new never used. 60 plus shipping.

I am also interested in the following if anyone interested in some/partial trade
S15 Helical LSD, Brand name S14 intercooler/and or piping (greddy, hks etc), S15, R32/R33 oem triple DIN gauge (as long as it has oil temp), s14 aero/nismo grill, recaro seat, 550cc injector.

For faster reply please send me email at [email protected]

http://img502.imageshack.us/img502/7026/img0426hd9.jpg

http://img177.imageshack.us/img177/3580/img0428mr9.jpg

http://img502.imageshack.us/img502/6078/img0437mb4.jpg

http://img177.imageshack.us/img177/9757/img0422rx1.jpg

http://img177.imageshack.us/img177/4803/img0424nn3.jpg

http://img517.imageshack.us/img517/8775/img0431aj6.jpg

cxlo8331
05-29-2007, 03:59 PM
Willing to ship z32 calipers to 92823?

motronic
05-29-2007, 04:23 PM
Willing to ship z32 calipers to 92823?

Shipping is no problem.
I would like to sell everything complete (rotor, pads, calipers, lines) as described above, shipping would be 40 to CA (they are quite heavy).

speedgod^s13
05-30-2007, 02:16 AM
How much for the z32 set-up shipped to 96816? To save on the weight, I may want you to take out the rotors. I know you don't want to part out, but shipping is going to kill me.

motronic
05-30-2007, 10:34 AM
How much for the z32 set-up shipped to 96816? To save on the weight, I may want you to take out the rotors. I know you don't want to part out, but shipping is going to kill me.

The whole 300ZX brake setup is sold.
Only the evo calipers and ball joint still available.
Thanks