KA-T turbo kit. COMPLETE and in SOCAL.

[vinhisbored]

i live in lake elsinore (riverside county.. 951 area code) i prefer pickups because it's faster/more convenient and cheaper for the buyer than me shipping it.. but i will ship it at your expense.

first of all.. i'd prefer to sell it as a WHOLE and complete for someone because some items were customed to fit with others. (for example.. the intercooler piping to go with how this certain turbo fits on this certain manifold.)

so yeah for now.. i'm only trying to sell it as a complete kit to someone who is exactly serious and wants a pretty damn good ka-t setup before building it. if you wanna take one step up and build it.. just go with bigger injectors and and ecu tune or stand alone and you're good to go.

the whole setup was driven no more than 500 miles. yes.. i said 500 miles. (minus the clutch.. it has roughly 1000 on it) here's the story about that. i purchased the clutch when the car was non turbo and broke it in beforehand. i then turbo'd the car, broke the turbo setup in on the dyno and made 253 whp and 273 trq on 7-7.5 psi.

my motor from the get go wasn't that healthy.. so i blew it.. and my car's been sitting in my garage for maybe 6 months now.. just waiting for a rebuild that i never got around to.

here's the setup.

1. garrett t3/t04e 70 trim compressor with .63 A/R back side
unit is single ball bearing
compressor is polished up so the garrett & trim was sanded off.
rated for 500 hp

2. IAP equal length tubular manifold.. was modified a bit to fit the 38mm wastegate

3. greddy 38mm wastegate from the twin turbo 350z kit. super bling/baller. anodized blue color. i've never seen it on any car other than a 350.. and of course mine.

4. greddy ka intercooler kit with modified cold pipe for better fitment. i've added some reducers as well as t-bolt clamps because greddy gives you shitty ones. the intercooler itself is still perfect.

5. hks ssq bov welded onto cold pipe

6. z32 maf

7. apexi s-afc 2 with bracket (it's already tuned.. i THINK that the tune would stay on the safc2 if i took it out? but someone let me know about that one.)

8. Deatschwerks 450cc injectors

9. rps max street puck clutch

10. apexi power intake with intake pipe to turbo compressor

11. perrin manual boost controller. very easy to use. no knob. you turn the whole unit either in or out for more / less boost.

12. custom 2.5" turbo elbow w/ wastegate dump tube attached.. so the dump tube goes back into the exhaust. this was made custom to bolt up to the sr downpipe/test pipe combo. it was made carefully so that it would still clear for your AC line.. so yes. you can still run your AC with this setup.

13. stainless steel 3" megan downpipe & test pipe

14. Steel Braided Oil Feed Line and fittings in to turbo. (supplied by Jeff240sx)

15. Steel Braided oil return line with anodized AN fittings. (supplied by Jeff240sx)

16. ka oil pan with fitting welded on it for the oil return line.

all items were purchased brand new within the last two or three years and are basically almost brand new.. remember! the kit is complete so you won't have to get anything other than maybe a couple of nuts/bolts/screws/washers etc.

serious buyers get at me. lowballers will be ignored. these parts are all really nice and quality items.. not any of that ebay crap.. so it won't be super cheap. it's also proven to make plenty of power.

i already know a number of people will want part outs. the way i see it.. if you can find other people to buy the rest of the parts.. than i'm fine with it. will post pictures in the morning when i get a chance to snap em.

HERE ARE THE PICTURES. i apologize for everything being messy because it's been sitting for like forever.. and i took off the radiator and sold it. once i get a serious buyer.. i will pull everything.

manifold before on car.
http://i8.photobucket.com/albums/a50/vinhisbored/ka-t/IAPtubularka24demanifold1.jpg

picture of complete setup when everything was on.. intake pipe was then extended.
http://i8.photobucket.com/albums/a50/vinhisbored/gsrandmaf/100_0360.jpg

pictures of turbo before being polished
http://i8.photobucket.com/albums/a50/vinhisbored/ka-t/myturbo-front1.jpg
http://i8.photobucket.com/albums/a50/vinhisbored/ka-t/Picture006.jpg
http://i8.photobucket.com/albums/a50/vinhisbored/ka-t/Picture007.jpg


http://i8.photobucket.com/albums/a50/vinhisbored/ka-t/katturbokit005.jpg
http://i8.photobucket.com/albums/a50/vinhisbored/ka-t/katturbokit006.jpg
http://i8.photobucket.com/albums/a50/vinhisbored/ka-t/katturbokit007.jpg
http://i8.photobucket.com/albums/a50/vinhisbored/ka-t/completeka-t002.jpg
http://i8.photobucket.com/albums/a50/vinhisbored/ka-t/completeka-t003.jpg
http://i8.photobucket.com/albums/a50/vinhisbored/ka-t/completeka-t004.jpg
http://i8.photobucket.com/albums/a50/vinhisbored/ka-t/completeka-t005.jpg
http://i8.photobucket.com/albums/a50/vinhisbored/ka-t/completeka-t006.jpg
http://i8.photobucket.com/albums/a50/vinhisbored/ka-t/completeka-t007.jpg
http://i8.photobucket.com/albums/a50/vinhisbored/ka-t/completeka-t008.jpg
http://i8.photobucket.com/albums/a50/vinhisbored/ka-t/completeka-t009.jpg
http://i8.photobucket.com/albums/a50/vinhisbored/ka-t/completeka-t010.jpg
http://i8.photobucket.com/albums/a50/vinhisbored/ka-t/completeka-t011.jpg
http://i8.photobucket.com/albums/a50/vinhisbored/ka-t/completeka-t012.jpg
http://i8.photobucket.com/albums/a50/vinhisbored/ka-t/completeka-t013.jpg
http://i8.photobucket.com/albums/a50/vinhisbored/ka-t/completeka-t014.jpg
http://i8.photobucket.com/albums/a50/vinhisbored/ka-t/completeka-t015.jpg
http://i8.photobucket.com/albums/a50/vinhisbored/ka-t/completeka-t016.jpg
http://i8.photobucket.com/albums/a50/vinhisbored/ka-t/completeka-t017.jpg
http://i8.photobucket.com/albums/a50/vinhisbored/ka-t/completeka-t018.jpg
http://i8.photobucket.com/albums/a50/vinhisbored/ka-t/completeka-t019.jpg
http://i8.photobucket.com/albums/a50/vinhisbored/ka-t/completeka-t020.jpg
http://i8.photobucket.com/albums/a50/vinhisbored/ka-t/completeka-t021.jpg
http://i8.photobucket.com/albums/a50/vinhisbored/ka-t/completeka-t022.jpg
http://i8.photobucket.com/albums/a50/vinhisbored/ka-t/completeka-t023.jpg
http://i8.photobucket.com/albums/a50/vinhisbored/ka-t/completeka-t024.jpg

[99maxgtr]

asking price?

[khmerguy618]

Interested in the kit, whats the asking price and do you have pics of everything?

email: [email protected]

i'm in norcal but my sister is gonna be attending riverside. So it's a possibility i'll be able to pick up.

[drifter1000]

whats your asking price? and if you have pics send to [email protected]

[vinhisbored]

i'm definitely looking for more than 2g's for this because it is so complete.
think about it. for around a grand.. you could get a simple ssac t25 370cc injector setup.. but here i have a complete kit with everything.. and with QUALITY name brand parts.

pictures have now been added btw.

[s13gold]

70 trim...god damnnn..
for bolt on...crazy.

[vinhisbored]

i guess let's bump this up. i'm deciding to part out now..
since i've had no real serious offers on the whole kit..
so if you want it.. send me a decent offer.
i've got one for 2100 shipped/paypal but i declined it.

on sunday someone will be picking up the
-manifold
-turbo
-turbo elbow
-wastegate
-oil lines and oil pan
-intake pipe

so everything else is up for grabs for those of you that are planning on putting a ka-t kit together. just PM me for what you want and i'll let you know the price.

[vinhisbored]

yes.. for those PM'ing me.. i still have everything so far. if anything is sold.. i will update and let you guys know.

so get these parts for your turbo setup!

i'm willing to trade for the following parts (and of course you're going to have to add cash) keep in mind again.. i drive a 98 so i just need parts that work on my car.
-stock s14 ka intake sytem.. the WHOLE THING from the coupler that goes into the throttle body up to the intake box.
-stock cat. s14 or s13.. doesn't matter.
-stock s14 ka radiator
-stock kouki driver side fender.. if in green.. GREAT. it'd color match my car.
-stock s14 ka maf.
-stock 98 ka o2 sensor (for those that did sr swap and don't need it.)
-stock 98 ka wire harness (for those that did sr swap and don't need it.)

[vinhisbored]

turbo/manifold/turbo elbow/oil lines + oil pan/intake PIPE is not gone. everything else is still available now for those trying to put together a turbo kit.

PM / email me and i will give you the price.

[vinhisbored]

lol whoops.. i meant NOW* haha

get your turbo items!

[vinhisbored]

safc2 is now $180 shipped
injectors are $180 shipped
clutch is now $275 shipped
maf is now $105 shipped
i'll sell the FMIC setup w/ bov for $520 + shipping (prefer local pickup)

remember to add paypal fees on top of that.

[vinhisbored]

pick ups definitely do have priority.. and if you buy multiple items.. i'll take off some cash.