Stealth Custom Fab. S13 tension arm brace

[Jonnie Fraz]

Ok you Preemies that have been following along know that I have developed a bolt in tension arm brace for the S13. This brace is a way to stiffen up the frontend of the S13 allowing more turn in and better braking. Also this design does not require removal of your tension arms, Sway bar or, tension arm brackets. It is about a half an hour install.
Here are the parts and the massive amount of tools required for install.

http://img.photobucket.com/albums/v635/Fraz-Man-One/parts-list.jpg

Installation is simple, using existing holes in the OEM brackets.
http://img.photobucket.com/albums/v635/Fraz-Man-One/Bolt-in-instructions-1.jpg
http://img.photobucket.com/albums/v635/Fraz-Man-One/brace-install-2.jpg
http://img.photobucket.com/albums/v635/Fraz-Man-One/brace-install-3copy.jpg
http://img.photobucket.com/albums/v635/Fraz-Man-One/brace-install-4.jpg
http://img.photobucket.com/albums/v635/Fraz-Man-One/brace-install-5.jpg
That is the install. Super simple.

My first Group Buy will be for ten braces.
This is an open group buy so I ship as soon as I get paid
Zilvia members just $90.00 plus shipping
Premium members Special pricing Check "Preemie Hookup"
I accept Paypal
Please PM me for address so I can make sure I have one in stock for you. They are selling quick!

[SPIRO]

awesome idea!!

[mestizo]

Hey just want to say that Jon is a great guy, he built my front brace for me and it works great! Plus he let me come by and watch while he made it, man can he weld. Thanks again Jon!

[ALEXTHESUS*PECT]

DON'T sleep in this! i just installed it for a drift event and locked up my front end completely, and made it so predictable! easy to install and cheaper then any "gismo" power brace! i went from spinning out to this:

http://i60.photobucket.com/albums/h10/ale89se/pics093.jpg
http://i60.photobucket.com/albums/h10/ale89se/pics092.jpg

i loved the feel of and when combined with subframe spacers the car just whips around whenever you tell it to! i love this brace. get one now!
http://i60.photobucket.com/albums/h10/ale89se/pics085.jpg

[Rittmeister]

I have an ST front swaybar on my S13 - will this clear the bar?

[mestizo]

I have an ST front swaybar on my S13 - will this clear the bar?

Here is a pic of the welded version that Jon made for me on my car, the cross bar is in the same spot as on the bolt on version, there is about 1 3/4" of space between the stock sway bar and the cross bar. So all you would need to do is figure out how much thicker your ST bar is than the stock bar. Hope this helps.

http://mestiso.net/photogallery/240/CIMG1943.jpg

[whooha1217]

i will order soon!!!!!!!!!!

[95Blue240sx]

S14 guys dont worry! He has one in the works for us as well!

[Slidin240Wayz]

S14 guys dont worry! He has one in the works for us as well!

Yes, I know....I know!:angel:

[ThatGuy]

Be sure to leave your feed back here as well guys!
http://www.zilvia.net/f/showthread.php?t=144119

:rawk:

[MrD]

S14 guys dont worry! He has one in the works for us as well!
:naughty: Can't hardly wait!

[hellion240sx]

WOW shipping to 70065? I'm redoing the whole suspension on my s13 right now, so why not this too? I almost bought the nismo brace. but this looks really good. and at a great price!

[Sliders562]

how much shipped to 90804?

[scottie]

Can you still make the "U Weld" type? I'd rather purchase one of those.



Scott

[Lucient]

email a price shipped to 30039 to [email protected]
I need one for my s13

[hellion240sx]

so whats a u "weld" type?

[mestizo]

Im not sure what he means by "U weld" but my brace was welded by Jon, it was the 2nd one he made of the welded version. However he is just making the bolt in kind so that people do not have to send him their TC brackets, but you can always get the bolt on version and have some one weld it for you.

[satal95]

price shipped to 78237 please

[scottie]

The "U Weld" as i refered to it is the one above that all welded. It should be a little cheaper since you dont have the bolts and stuff. It should just come with the cross bar and two plates as in the picture. Then i can weld it myself. Will he make them? Seems like a good idea to offer both.


Scott

[satal95]

payment sent johnnie

[jrivera]

Jonnie Fraz,

PM sent.

[jrivera]

Payment sent

[DrtyRat]

Payment sent
HaHa! www.SFL240SX.com representing in the group buys!!

[sittinsideways]

price shipped to 06234?

[xnyc]

how much shipped to 11355

[jrivera]

Can't wait to get mine :-D

[khmerguy618]

S14 guys dont worry! He has one in the works for us as well!

awesome stuff.

[jdmae86]

shipped to 27409... gonna order in July :]

[santacruz77]

i just orderd mine!

[viperbite]

wow thats really good fabrication my friend

how different is the s14 and s13 one?

ive got an s14
and i actually bent my stock bar... and from the looks of it. the brace will not fit bent like it is. idk i think i can bend it back. i might try to find a replacement. but i will definatly be getting one of these bars when i work everything out.

[GKTECH]

Are you able to send to Australia?

I know a fair few of the guys here will be very interested in these!! Myself included.

Greg

[pr240sx]

shipping to 00921 via USPS?

[jrivera]

Great quality. It looks really nice.

I have an ST front swaybar on my S13 - will this clear the bar?

It doesn't :cry:

[Jonnie Fraz]

Rittmeister is running his. Check it out!
I Replied to your PM...I want to get this right for you. Please let me know.

Take care
Jonnie

[jrivera]

Rittmeister is running his. Check it out!
I Replied to your PM...I want to get this right for you. Please let me know.

Take care
Jonnie

Thanks. Maybe I have install issues. :loco: I'll try again tomorrow.

Thanks Johnnie.

[satal95]

Yup great product just installed mine yesterday would have done it sooner but one of the brackets was really bent so i had to find one before putting on the brace. easy to install also johnny u get a :bigok: in my book

[santacruz77]

i just got mine today putting it on in the morning and going to the mountains to see thanks man!

[tknbkthrsdy4anfg]

I just realized I haven't posted in this thread, so buy the brace, it rocks, and I rock one!

DO IT NOW!!! <3

[sultan]

still available? i pm'd you a week and a half ago and never got a response.

[NismoSilvia270R]

got mine. 4days. looks freakinsweet

[sultan]

money has been sent for 2 braces :D

[paNX2K&SE-R]

Money sent for a brace Jonnie :)

[paNX2K&SE-R]

I got mine yesterday, it looks fantastic!

[nateb]

can i get for for a s13?? pm me wit shipping to NJ 07728 thanks

[jrivera]

It is for a S13...

[jdmae86]

i never got a price shipped to me...

[Jonnie Fraz]

Sorry about that...sent you a pm with shipped price.

[jpadilla12]

s13 shipped to 34743, Thanks

[jdmae86]

paypal sent!!!!

[Charcoal]

PM Sent!!!!!!

[pr240sx]

Hey...what about shipping to 00921 via USPS priority?

[INeedNewTires]

do you have the S14 one yet!!?!?!?!? please pm me a price, and date of when you'll have it. thanks

[dops13]

Is the price still 90 plus shipping?

[Charcoal]

Thanks MR. Fraz, Brace looks great!! Waiting on a driveshaft then i will post up my feelings.

[hashiriya13]

can I get a price shipped to 96386. Thanks

[logik23]

Can you jack the car up from the bar? Cause I dunno where to jack my car up from the front anymore. lol And how much shipped to H3X 2R9 in Canada?

[Jonnie Fraz]

Can you jack the car up from the bar? Cause I dunno where to jack my car up from the front anymore. lol And how much shipped to H3X 2R9 in Canada?
I would not really recomend it. The tube I use is is more for compressoin and torsional twist not lifting. I can make one from heavy wall if you want...it would weigh a ton though...lol
I PM'ed you on shipping costs.

[Symyn240]

Shipped to 92065 please

[speed_racerx]

anymore available for S13?

[hunter8411]

Get a chance to make one for the S14 yet? Whenever you do PLEASE PM price shipped to 91745 and I'll be all over that. Thanks

[I_DID_SILVIA]

i would also like to buy one off you

[Drakon]

Price shipped to 37315?

[Jonnie Fraz]

Ok guys...yes I am still building them. I am out at the moment, but I have a few parts left so I will be building a few this weekend. I have orderd more laser cut parts, so I can keep this going.
Thanks so much for your support.

Jonnie

[240sxScores]

how much shipped to 28545 please.

[Rogue240sx]

Just to let you guys know I installed mine today and this thing makes a difference. install was fairly simple and the handling of the car is definetly more responsive.
You can't beat that price either.

Thanks for an awesome product Jonny!

[logik23]

Installed mine today, looks good, but haven't driven the car since....lol

http://img.photobucket.com/albums/v731/logik23/New011.jpg

http://img.photobucket.com/albums/v731/logik23/New014.jpg

http://img.photobucket.com/albums/v731/logik23/New013.jpg

http://img.photobucket.com/albums/v731/logik23/New012.jpg

[nevaland9]

price shipped to 11542

[S130oner17]

wondering if you have any braces left? if so how much shipped to 98312 in Bremerton, Wa

[Jonnie Fraz]

Guys I am out right now...I have a Huge order in with my laser cutter, I am expecting parts in the next day or so...hopefully for the weekend, so I can build some.
Shipping to New York $12.00...Shipping to Washington $10.00. I designed these to be easy on shipping. West cost takes like 1-2 days East coast a bit longer...like 4-5.

Thanks so much for the interest
Jonnie

[LongLiveJDM]

will you ship to canada?

[Jonnie Fraz]

will you ship to canada?

Yes I will ship to Canada. It does cost a little bit more to be honest...about $20.00-$30.00 US via USPS with inshurance and tracking.

[Ninjabread]

It's worth it though.

I'm ordering when I don't have debt :)

[mestizo]

It's worth it though.

I'm ordering when I don't have debt :)


Indeed it is!!! The brace rocks!:rawk:

[mad-ass]

Indeed it is!!! The brace rocks!:rawk:

is that why you were sliding so good at the Thunder Drift? haha

make one for S14 XD

[scottie]

Hey Jonnie! Well i figured out my sway bar wasnt mounted correctly so now that i removed it, i welded in your bar. So far so good.

My only question now is, can i run an aftermarket sway bar? Have you ever tested it with GodSpeed or ST? Just wondering before i spend more of my money lol!


Scott

PS: One other thing. What kind of speed do you use on the welder to weld the bar/side plate together? You tac'd it in but i want to completely weld it in. Im using a Mig with Argon gas. Do i need to turn the speed down and just hold it on there or speed it up?

[suaknee]

Price to ship to 33321? thanks!

[mestizo]

is that why you were sliding so good at the Thunder Drift? haha

make one for S14 XD

Well the bar part is part of the reason I am where I am now. I did better at the september thunderdrift than I did at this last one, mainly cuz my Azenis on the front were blad this time so I was fighting a lot of understeer the whole day.

The S14 bar is still being prototyped, a few issues have made it more of a labor to build than the S13 version.

[mad-ass]

Well the bar part is part of the reason I am where I am now. I did better at the september thunderdrift than I did at this last one, mainly cuz my Azenis on the front were blad this time so I was fighting a lot of understeer the whole day.

The S14 bar is still being prototyped, a few issues have made it more of a labor to build than the S13 version.

you should advertise this stuff at the TD..

oh btw if you are wondering, this is Lee.

[mestizo]

you should advertise this stuff at the TD..

oh btw if you are wondering, this is Lee.

Yea we didnt have any of the bars to show off at Thunderhill cuz Jonnie was waiting on parts to come in from his laser cutter. However they have since arrived and the fabbing is on! LOL but I did some advertising of his site as you already know, the sticker on the back of my car is Jonnie's website.

http://i224.photobucket.com/albums/dd301/ConePirate/TD%2010%202021%2007/Rob03.jpg

[Jonnie Fraz]

you should advertise this stuff at the TD..

oh btw if you are wondering, this is Lee.

With any kind of luck I will have some stuff to show off at the next Thunder Drift here in a couple weeks. If I can get it done I will bring an S14 Prototype.

Mestiso FTW!LOL

[mad-ass]

With any kind of luck I will have some stuff to show off at the next Thunder Drift here in a couple weeks. If I can get it done I will bring an S14 Prototype.

Mestiso FTW!LOL

oooh, can i be your tester? please XD

my car is a virgin S14 Automatic :coold:

only mods are Stance GR+ and circuit sports exhaust.. :eek3:

[240sxScores]

Do you have any ready yet for sale?

[Jonnie Fraz]

Ok boys and girls...My laser cutter came through for me and I now have some of these back in stock ready to be shipped out.
Remember Preemies get special pricing...worth the upgrade. Contact me via PM for a shipping quote.

[hondanissan]

Is there an ETA for the s14 brace yet?

[240sxScores]

Sent you pm. Sent money via paypal yesterday.

[S130oner17]

I just bought and installed this tension arm brace from jonnie and it works great!!! i have better turn in and out, the front end locks up better and i have better braking now!! i recommend this product to anyone with an 240 or silvia!!

[shinhed]

Excellent alternative to Nismo's offering.

The best part is he includes Loctite and the quality of the parts in the kit. I'd buy again if I had a reason to.

[scottie]

Finally got mine all welded up!! I'll snap some pics when it comes back from powdercoating. Thanks Jonnie!

[shinhed]

http://img.photobucket.com/albums/v726/JewGal/102_0128-1.jpg
http://img.photobucket.com/albums/v726/JewGal/102_0142.jpg

[bart628]

I just got mine and the quality is superb :)

[mad-ass]

what is the update with S14 braces?

i just peeped at mine, and seems like it's different then the S13[DUH?] tension arm..there is no hole for the same fitting..

so if anything we'll have to drill a hole to fit it, unless you got some magic..haha

[Slidin240Wayz]

Jonnie,

Let me know if you want to pictures of you know what an a you know what,

[Jonnie Fraz]

I am thinking about a small production run of the S14. They are way harder to install, as you must drill your tension arm brackets with some degree of precision.
http://img.photobucket.com/albums/v635/Fraz-Man-One/S14-3.jpg
http://img.photobucket.com/albums/v635/Fraz-Man-One/S14-protype-version-2-pic-2.jpg

[cdlong]

if you make one for the s14 like that, i'm down for one for sure.

just a thought, it might be worth it to use larger tubing bring the angled braces all the way to the middle to make a V. it would be stronger in bending that way. or even add another smaller cross brace like an wide A. but that's getting to the point of overkill.

[Creizai]

Could ya pm me the price of one s13 brace shipped to 45011? thanks

[Jonnie Fraz]

if you make one for the s14 like that, i'm down for one for sure.

just a thought, it might be worth it to use larger tubing bring the angled braces all the way to the middle to make a V. it would be stronger in bending that way. or even add another smaller cross brace like an wide A. but that's getting to the point of overkill.

Ok, Ok...I am in the process of getting parts to start a small run of the s14 brace. Price is not yet determined I want to keep it the same as the S13, but there is a bit more work involved in building them.
Bringing the tubes to the middle is a good idea, excet I am at the max of my tubing notcher. Using larger tubing might cause interfearance issues with the power steering bracket..god ideas though.
I do have a prototype out there being tested. If he wants to give you guys his feelings on the brace he is more than welcome to jump in.

Thanks
Jonnie

[design240sx]

price shipped 48089....

[design240sx]

price shipped to 48089

[mad-ass]

flipping awesome.

if you can make a production run by mid feb, i am so in.[i am getting deployed for 4 month at end of feb. so that's why mid feb]

[sultan]

i finally got around to installing mine, a smart person probably would have noticed that one side of the brace has holes for the ps bracket bolts to go back through. i, on the other hand, installed it so that side was on the passenger side of the car and didn't think about it until the very end. i'm too lazy and it's too cold to swap it, oh well.

it is a nice brace, though.

[Jonnie Fraz]

Wow man! You got that thing from me days ago...lol. I am glad you like it. Have you driven the car since you installed it? You will kick yourself for not installing it sooner.
Enjoy buddy.

[fromxtor]

After I switch back to my S13 braces, I'll be picking one of these up.

[s13 coupe]

you still have the brace? how much to 95133

[hotlavaflow]

Need a price shipped to 11226.

[texas_s13]

how much shipped to 78741

[Jonnie Fraz]

you still have the brace? how much to 95133

Need a price shipped to 11226.

how much shipped to 78741

Sent you guys a PM with shipping quote

Take care
Jonnie

[hellaflush]

http://i60.photobucket.com/albums/h10/ale89se/pics085.jpg

boobs

what materials are used for the bracing kit?

[Jonnie Fraz]

Allot of different materials go in to the kit...All mild steel. All the hardware is grade 8.

[james13]

buy still open?

what is wait time?

[hotlavaflow]

Thanks for the info. sounds like a good deal I'll be ordering soon.

[MavericStephenc]

I want s14 version updates!

also how much for the s13 version shipped to 01970

[Macho240]

How much for s13 shipped to 32137?

[Jonnie Fraz]

I want s14 version updates!

also how much for the s13 version shipped to 01970

How much for s13 shipped to 32137?

Sent you guys a pm.

[Hawaiian240]

S13 shipped to 29445?

[shoryuuu]

how much for a s13 shipped to 75040?

[S14klutz]

I want one for my S14. priced shipped to 95843

[ayuaddict]

hi, i was wondering if these were still available?

if so, S13 shipped to 95125?

[Mister.E]

hi, i was wondering if these were still available?



you and me both bro. are you still producing them for the S13?

[ukoredgar]

How much is the shipping to 98366 WA state. I would like to buy one for my S13 Coupe. E-mail me back at [email protected] thanks:)

[Jonnie Fraz]

hi, i was wondering if these were still available?

if so, S13 shipped to 95125?

you and me both bro. are you still producing them for the S13?

How much is the shipping to 98366 WA state. I would like to buy one for my S13 Coupe. E-mail me back at [email protected] thanks:)


Pm's and e-mails sent out.

Yes I am still going on these like the Energizer Bunny. They are my hottest seller.
The weather is getting nicer and auto-x season is comming, so I will be trying to build up my inventory for you guys that don't have one yet.

[R33GTS-T]

how much shipped to 19003 and what's the wait time on them? also, do you make any other suspension parts for the s13?

[240sxorty]

How much for an s13 shipped to 77053? I also was wondering if you have any other Suspension parts, such as a strut bar with a brake master cylinder brace built in?

[JohnnyDrfiter22]

How much shipped to 08106.

[Jonnie Fraz]

I think I got back to everyone on shipping and avalibility, if not please pm me.

Thanks guys
Jonnie

[240sxorty]

Mines in the mail. Can't wait to receive it. Thanks Jonnie Fraz

[dropemlow]

got mine in the other day. very nice work. very well made. cant wait to get it on the car. thanks again

[shinhed]

Just to reiterate, this is a very well put together kit. From the welds to the cadmium coated grade 8 hardware to the Loctite. Only OEM will give you attention to detail like this kit.

[hondanissan]

great quality product. i just met up with mr fraz a couple days ago and picked one up for my s14. i havent had the chance to install it, but i will let you guys know how it goes. mr fraz is definitely one of the coolest guy around. plus one for mr fraz.

[Jonnie Fraz]

great quality product. i just met up with mr fraz a couple days ago and picked one up for my s14. i havent had the chance to install it, but i will let you guys know how it goes. mr fraz is definitely one of the coolest guy around. plus one for mr fraz.


Thanks buddy! It was good talking with you:bow: Let me know how the install goes.

[4bangers]

so how much is the kit for S14 shipped 98008? and please post up your finished installation and a review would be nice.

How hard is the installation? Thanks

[ahboy401]

hey how much is the s13 shipped to 02908? thanks

[cdlong]

great quality product. i just met up with mr fraz a couple days ago and picked one up for my s14. i havent had the chance to install it, but i will let you guys know how it goes. mr fraz is definitely one of the coolest guy around. plus one for mr fraz.

wait, the S14 version is avaliable? i've been waiting all this time? damn. how much shipped to 44240?

[Jonnie Fraz]

so how much is the kit for S14 shipped 98008? and please post up your finished installation and a review would be nice.

How hard is the installation? Thanks

wait, the S14 version is avaliable? i've been waiting all this time? damn. how much shipped to 44240?


Ok guys Yes I do small production runs of the S14 brace...the last ones went out of here so fast I could not believe it. I am going to keep going with them, but they are harder to install. You must drill your TC brackets.
I do small production runs because they are harder to do, but I absorb most of the cost for production.
I will send you guys a PM on pricing and availibillity.

Take care
Jonnie

[R33GTS-T]

how much shipped to 19003 and what's the wait time on them? also, do you make any other suspension parts for the s13?
I didn't get a quote yet...

[hondanissan]

this brace is awsome. i can definitely feel that my front end is more solid. this is a great product guys...and gals. if you dont have one, you'll want one. hit up jonnie and he'll put in production for you.

[Jonnie Fraz]

I didn't get a quote yet...

Sorry man I pmed you twice. I must have goofed somthing up.
Here ya go $90.00 for the brace kit and $15.00 for shipping via Fedex home delivery.

Take care
Jonnie

[nysmo240]

Hey Johnny...my lil bro picked one up from u recently for his S14 and now I'm interested in one. Can you quote me for 1 shipped to 93117? Thanks.

[Fricshon]

Looking for an S13 brace if they're still available, PM'd but never herd back shipping would be to 95521 thanks

[Phlip]

Forgot to mention that I got mine last week, these are the greatest, BUY FROM JONNIE!!!

[Jonnie Fraz]

Forgot to mention that I got mine last week, these are the greatest, BUY FROM JONNIE!!!

Glad you like them buddy!!

[MikeisNissan]

Jonnie is the Man!

[Jonnie Fraz]

Thanks guys for the kind words! To give you guys a little update on what I am ading to my braces.
I was hand scuffing these with Scotch Brite pads to clean them up and give the paint some bite. Now I am media blasting them with aluminum oxide to clean them up and give the paint some bite.
Also in every brace package from now until I run out is two Stealth Custom Fab stickers. They fit perfect on the quarter windows...hint hint.

Thanks guys
Jonnie

[Fricshon]

Jonnie is the man. I asked him if I could have mine shipped before thunderhill this weekend and he delivered! I got mine in the mail yesterday, cant' wait to install. Brace looks amazing, will be a nice compliment to my stk tension rods. Thanks again Jonnie, BUY FROM HIM.

[YoungGun]

Is this GB still going on? I want some.

[clain]

Can I get a quote for the power brace and rear strut bar shipped to 64055? Word on the front strut?

[WhiteGLX]

PM sent..................

[nysmo240]

I just got mine...and I can't wait to slap that baby on.

[THE-D]

i got mine last week
fast shipping and i cant wait to put it on the car :bigok:

[hunter8411]

Can I get a quote on a S14 tension arm brace shipped to 91765?

[spiderlone]

NICE.. kool .stuff....

[nixad]

S13 bar shipped to 11757

[jlouguyver21]

s13 shipped to 92374 nice product btw

[D.Bo]

s13 brace shipped to 70131

[mad-ass]

waiting for you to get done with S14 Brace man.

I saw pics of Doug's Brace and I like them alot. A LOT!

hurry ^__^

[DV19]

PM has been sent

[Gorilla Unit 33]

My stuff just came in BEAUTIFUL WORK JOHNNY! cant wait to put it on. QUALITY shit right here people.

[Razi]

Jonnie is THE BOMB!

[Jonnie Fraz]

My stuff just came in BEAUTIFUL WORK JOHNNY! cant wait to put it on. QUALITY shit right here people.

Jonnie is THE BOMB!

Thanks guys!

[Sky80]

S13 shipped to 73034

[Jayb0206]

S13 shipped to 19036?
Thanks

[510-SR20DET]

how heavier is this compare to Nismo brace? Can you send me a pm of how much for a welded version one? shipped to 94703

[S13project]

still making these???? for s13.

[mad-ass]

I'm actually wondering the same thing. I just installed this on my S14 earlier tonight..and I must have this on the S13 now.[yeah, I got it from you last year...July..I know i know...]

if you got one, I'll go pick it up <3

[Exas Spec D]

S13 Tension Arm Brace still available for purchase?

[texas_s13]

price shipped to 78741

[hotlavaflow]

S13 shipped to 11226?

[99maxgtr]

any updates as far as the s14 brace?

[Jonnie Fraz]

I am gonna be fabbing more this weekend...I have had a run on them lately.

[k0uki]

s13 shipped to 95121

[TurboSE]

s13 shipped to Hanover Pa, 17331

[hotlavaflow]

Got mine today, track day tomorrow so I'll really see the difference. Thanks man super quick fab and deliver. Posi feedback left.

I am gonna be fabbing more this weekend...I have had a run on them lately.

[brad_240sx]

How much shipped to 84721? Thanks

[Jonnie Fraz]

Ok a quick update I have been fabbing like a madman. I have a few of the S14 braces in stock. I tried to contact the guys on the waiting list first for these...if I missed you please shoot me a PM and I will get you one.

Take care
Jonnie

[hotlavaflow]

Have you thought about making trunk braces? Similar to these?

GTSPEC Trunk Floor Brace for 89~93 240SX (S13) (http://www.240sxmotoring.com/gttrflbrfor8.html)

Does anyone know if those actually do anything?

And what about a diff brace?

[LugNut18]

Priced shipped to 21014 for the S13 brace.

Thanks

[norcal_black240]

Just got my tension arm brace, its beefy as hell. Thanks jonnie

[Serebros]

i got mine too, real nice

[Jaketenpointo]

s13 to 95926?

[w0nderbr3ad]

s13 brace to 92139?

[bradystrib]

s13 shipped to 30082. Thanks :D

[ashaw3]

s13 shipped to 77069. thanks.

[zweebach]

Sounds like a a nice product. Better late than never, Can I get one sent to 75001?