PDA

View Full Version : S15 HLSD $361 shipped / ER34 radiator $135 shipped

mrmephistopheles
04-17-2007, 01:14 AM
HLSD - $SOLD
Comes with bearings.
http://img223.imageshack.us/img223/2879/s15auz0.jpg
http://img291.imageshack.us/img291/9615/s15bvm8.jpg


ER34 radiator - all-aluminum, light as hell $134.20 shipped
http://img219.imageshack.us/img219/9605/er34rad1vw2.jpg
http://img100.imageshack.us/img100/8401/er34rad2hr4.jpg

Measurements are:
24.5" between top posts
26.5" wide
20.5" tall
19" between upper/lower outlet
14.5" between bottom posts.
thickness is maybe 1"? it's a stock rad. Probably would work best for KA replacement.



Paypal with confirmed shipping addresses only!
ryebreadz28
04-17-2007, 07:36 AM
PM sent about HLSD...
Xren17
04-17-2007, 11:14 AM
Does the HLSD come with output shafts?
pbcstylez
04-17-2007, 12:23 PM
also curious what output shafts will be necessary to get this to work for s14?
Jung918
04-17-2007, 12:29 PM
also curious what output shafts will be necessary to get this to work for s14?

s15 output shafts. Also recommended to use the s15 bolts.
pbcstylez
04-17-2007, 12:55 PM
thank you jung918!
Jung918
04-17-2007, 01:12 PM
Some people have said that the s13 ones fit. However, the s15 comes with 30 splines on the output shaft and one is also longer then the other. So I have no idea how they got it to fit. Maybe it's the viscous output shafts.
e1_griego
04-17-2007, 01:20 PM
Nope, you need the 30spline s15 ones, for sure. My helical worked w/ s13 output shafts b/c it's not from an s15.

/threadjack

Alex
OperationSr20
04-17-2007, 01:29 PM
Alex, don't foget about Greg's, IIRC he is using Stock S13 Output Shafts & Axels with the HLSD on his vert. I am going to check up on that just to make sure my info is correct.
e1_griego
04-17-2007, 01:43 PM
Nope, he's not.

That was me in that thread talking about that :-X. It took him a while to source a set of s15 output shafts.

Alex
OperationSr20
04-17-2007, 02:47 PM
Removed for information that may not be 100% correct. Playin' it safe.
mrmephistopheles
04-18-2007, 09:50 AM
HLSD comes with what you see. HLSD unit, and bearings. No shafts unless I find some locally.

Jspec.com has and/or can get the shafts you need. I saw a set on eBay as well.
I don't know about S13 shafts working, but if it's the Greg with the vert I'm thinking of, I'd trust that info as much as I'd try to fit an L28 oil pump onto a KA.
mrmephistopheles
04-18-2007, 05:10 PM
HLSD is SOLD SOLD SOLD. Folding the ER34 rad into my other thread (http://www.zilvia.net/f/showthread.php?t=138950).