View Full Version : Greddy Intercooler install help?
ctopher06
04-12-2007, 07:46 PM
im trying to install my newly acquired Greddy Intercooler setup. the core dimensions are 34" longx11"tallx3"wide. i was trying to slide it up into my bumper and there is not enough room due to part of the bumper being in the way. i was curious as to what the best way is to cut this section out or bend it out of the way. this Greddy kit is used and supposed to be a direct setup for an s14. i have a 95' 240sx. here are some pics with the little lip that is in the way highlighted.
http://i87.photobucket.com/albums/k147/Ctopher19/IChelp.jpg
http://i87.photobucket.com/albums/k147/Ctopher19/ICHELP3.jpg
http://i87.photobucket.com/albums/k147/Ctopher19/ichelp2.jpg
any help would be great!
thanks...
choppity chop! These Greddy kits arent drop in, you have to modify your usdm bumper support. Either do this, hack the entire center section off, or be jdm tyte and find a jap bumper support...
http://pics.shorty.org/files/12/greddychop.jpg
misfitsfreak81
04-12-2007, 08:06 PM
you have to remove your bumper cover, and the actuall steel bumper. mark the area that needs to be cut and go to town with a sawsall or something similar. i just cut out the middle section completely on mine. you will also have to trim your bumper cover unless you have a body kit on the car already. hope this helps.
Mike
North Shore Performance Auto
Your Performance Parts Specialist
[email protected]
Tomei, Sard, Hks, Greddy, Tein, Defi, Bride ect........
ctopher06
04-12-2007, 08:11 PM
yea..thanks for the help..i guess i will go find my saw:bash:
Nachtmensch
04-12-2007, 08:14 PM
just remove the bumper. ;) you don need that shit! weight reduction too
khilgers
04-12-2007, 08:34 PM
http://hiprollc.com/installations/S1415_instructions.pdf
this may help too.
Edgar
04-12-2007, 09:07 PM
cut cut cut cut cut cut
sTalnOut
04-12-2007, 09:51 PM
you have to cut the rebar , i have done the same wid my greddy i/c jst cut the rebar n youll be fine but fo sure its not a dropin direct fit.like edgar said cut cut cut and dunt worri bout the rebar the i/c is stronger then the bar lolz
ctopher06
04-12-2007, 10:21 PM
lol...alright..thanks for your help fellas...i guess its time to start cutting:bigok:
opponheimer
04-13-2007, 12:24 PM
If you cut, box the cut space on the bumper support in for structural support.. Or just leave it removed... I threw mine out entirely
eastcoastS14
04-13-2007, 12:53 PM
edit:double post
eastcoastS14
04-13-2007, 12:55 PM
lol just dont crash like me or else your car will be resting in pieces
i think my next car will have a vmount or flush mount set up
vBulletin® v3.8.11, Copyright ©2000-2021, vBulletin Solutions Inc.